In the present research, a novel rate-dependent micromechanical model was presented to predict the stiffness and strength of unidirectional glass/epoxy composites. To predict the strain-rate dependent stress–strain behavior of glass fibers, using the Maxwell model with the aid of semi-empirical relations, a new viscoelastic constitutive model was proposed. Moreover, to predict the strain-rate dependent ultimate strength of brittle glass fibers, the elasto-plastic strain-rate dependent Cowper-Symonds material model was simplified by deleting the plastic terms. The strain-rate dependent mechanical properties of the polymer were also investigated by using the modified Goldberg model. Then, by modifying the Mori-Tanaka micromechanical model, a rate dependent micromechanical model was developed to predict the effective elastic properties (stiffness and strength) of unidirectional fibrous composites at arbitrary strain rates. The present model was called the strain-rate dependent Mori-Tanaka micromechanical model. As inputs, the present model just needs the viscoelastic and viscoplastic properties of fibers and polymer. Therefore, the present model reduces the necessary experimental data to predict the rate-dependent mechanical properties of unidirectional composites. For verification of the present model, the results were compared with experimental data and very good consistency in predicting the rate-dependent behavior of unidirectional composites was observed.
TaniguchiNNishiwakiTHirayamaN, et al.Evaluating the impact tensile properties of unidirectional fibre-reinforced composites with thermoplastic epoxy resin. Trans Jpn Soc Mech Eng A2009; 75: 1284–1289.
2.
HardingJWelshLM. A tensile testing technique for fiber reinforced composites at impact rates of strain. J Mater Sci1983; 18: 1810–1826.
3.
DanielIMHsiaoHMCordesRD. Dynamic response of carbon/epoxy composites, high strain rate effects on polymer, metal and ceramic matrix composites and other advanced materials. Am Soc Mech Eng Aerospace Div1995; 48: 167–177.
4.
Daniel IM, Hamilton WG and LaBedz RH. Strain rate characterization of unidirectional graphite/epoxy composites. Composite Materials: Testing and Design. In: Proceedings of the 6th International Conference on ASTM STP 787 (ed. I M Daniel), 1982, pp. 393–413. American Society for Testing and Materials.
5.
GrovesSESanchezRJLyonRE, et al.High strain rate effects for composite materials. Composite materials - testing and design. Am Soc Test Mater1993; 11: 162–176.
6.
KendallMSiviourC. Experimentally simulating high rate behaviour: rate and temperature effects in polycarbonate and PMMA. Philos Trans R Soc A: Math Phys Eng Sci2015; 372: 1–12.
7.
AmoedoJLeeD. Modeling the uniaxial rate and temperature dependent behavior of amorphous and semicrystalline polymers. Polym Eng Sci1992; 32: 1055–1065.
8.
Bordonaro CM. Rate dependent mechanical behavior of high strength plastics: experiment and modeling. PhD Thesis, Rensselaer Polytechnic Institute, Troy, New York, 1996.
9.
PlaseiedAFatemiA. Deformation response and constitutive modeling of vinyl ester polymer including strain rate and temperature effects. J Mater Sci2008; 43: 1191–1199.
10.
ShokriehMMOmidiMJ. Tension behavior of unidirectional glass/epoxy composites under different strain rate. Compos Struct2009; 88: 595–601.
11.
PardoSBaptisteDDécobertF, et al.Tensile dynamic behaviour of a quasi-unidirectional E-glass/polyester composite. Compos Sci Technol2002; 62: 579–584.
12.
ArmenakasASciammarellaC. Response of glass-fibers-reinforced epoxy specimens to high rates of tensile loading. Exp Mech1973; 13: 433–440.
13.
HayesSVAdamsDF. Rate sensitive tensile impact properties of fully and partially loaded unidirectional composites. J Test Eval1982; 10: 61–68.
14.
OuYZhuDMobasherB, et al.Mechanical characterization of the tensile properties of glass fiber and its reinforced polymer (GFRP) composite under varying strain rates and temperatures. Polymers2016; 8: 1–16.
15.
StaabGHGilatA. High strain rate response of angle-Ply glass/epoxy laminates. J Compos Mater1995; 29: 1308–1320.
16.
SunCChenJ. A simple flow rule for characterizing nonlinear behavior of fiber composites. J Compos Mater1989; 23: 1009–1020.
17.
GatesTSSunC. Elastic/viscoplastic constitutive model for fiber reinforced thermoplastic composites. AIAA J1991; 29: 457–463.
ThiruppukuzhiSVSunC. Models for the strain-rate-dependent behavior of polymer composites. Compos Sci Technol2001; 61: 1–12.
20.
ShokriehMMOmidiMJ. Investigating the transverse behavior of glass–epoxy composites under intermediate strain rates. Compos Struct2011; 93: 690–696.
21.
ShokriehMMOmidiMJ. Investigation of strain rate effects on in-plane shear properties of glass/epoxy composites. Compos Struct2009; 91: 95–102.
22.
ShokriehMMOmidiMJ. Dynamic progressive damage modeling of fiber-reinforced composites under different strain rates. J Compos Mater2010; 44: 2723–2745.
23.
ShokriehMMMosalmaniROmidiMJ. Strain-rate dependent micromechanical method to investigate the strength properties of glass/epoxy composites. Compos Struct2014; 111: 232–239.
24.
TabieiAAminjikaraiSB. A strain-rate dependent micro-mechanical model with progressive post-failure behavior for predicting impact response of unidirectional composite laminates. Compos Struct2009; 88: 65–82.
25.
TabieiAYiWGoldbergR. Non-linear strain rate dependent micro-mechanical composite material model for finite element impact and crashworthiness simulation. Int J Non Linear Mech2005; 40: 957–970.
26.
XiaYYuanJYangB. A statistical model and experimental study of the strain-rate dependence of the strength of fibres. Compos Sci Technol1994; 52: 499–504.
27.
WangZXiaY. Experimental evaluation of the strength distribution of fibers under high strain rates by bimodal Weibull distribution. Compos Sci Technol1998; 57: 1599–1607.
28.
TaniguchiNAraoYNishiwakiT, et al.Experimental study on impact tensile property of glass fiber. Adv Compos Mater2012; 21: 165–175.
29.
AraoYTaniguchiNNishiwakiT, et al.Strain-rate dependence of the tensile strength of glass fibers. J Mater Sci2012; 47: 4895–4903.
30.
ShokriehMMMosalmaniROmidiMJ. A strain-rate dependent micromechanical constitutive model for glass/epoxy composites. Compos Struct2015; 121: 37–45.
31.
Gibson RF. Principles of composite material mechanics. CRC press, 2016.
32.
HernandezCMaranonAAshcroftI, et al.A computational determination of the Cowper–Symonds parameters from a single Taylor test. Appl Math Model2013; 37: 4698–4708.
33.
BrazelCSRosenS. Fundamental principals of polymer materials, New York: John Wiley and Sons, 2012.
34.
ShenXXiaZEllyinF. Cyclic deformation behavior of an epoxy polymer. Part II: predictions of viscoelastic constitutive models. Polym Eng Sci2005; 45: 103–113.
35.
Foroutan R. High strain rate behavior of woven composite materials. PhD Thesis, McGill University, Montreal, 2009.
36.
ZhangCMooreID. Nonlinear mechanical response of high density polyethylene. Part II: uniaxial constitutive model. Polym Eng Sci1997; 37: 414–420.
37.
KremplEMcMahonJJYaoD. Viscoplasticity based on overstress with a differential growth law for the equilibrium stress. Mech Mater1986; 5: 35–48.
38.
GoldbergRKStoufferDC. Strain rate dependent analysis of a polymer matrix composite utilizing a micromechanics approach. J Compos Mater2002; 36: 773–793.
39.
GoldbergRKRobertsGDGilatA. Implementation of an associative flow rule including hydrostatic stress effects into the high strain rate deformation analysis of polymer matrix composites. J Aerospace Eng2005; 18: 18–27.
40.
KhanASHuangS. Continuum theory of plasticity, New York: John Wiley and Sons, Inc., 1995.
41.
Zheng X. Nonlinear strain rate dependent composite model for explicit finite element analysis. PhD Thesis, University of Akron, 2006.
42.
TeratsuboMTanakaYSaekiS. Measurement of stress and strain during tensile testing of gellan gum gels: effect of deformation speed. Carbohydr Polym2002; 47: 1–5.
43.
AlbérolaNDMéléPBasC. Tensile mechanical properties of PEEK films over a wide range of strain rates. II. J Appl Polym Sci1997; 64: 1053–1059.
44.
Mosalmani R. Dynamic crash of laminated composites filled with carbon nanofibers. PhD Thesis, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran, 2014.
45.
BenvenisteY. A new approach to the application of Mori-Tanaka's theory in composite materials. Mech Mater1987; 6: 147–157.
46.
LiuLHuangZ. A note on Mori-Tanaka's method. Acta Mech Solida Sin2014; 27: 234–244.
47.
MullikenADBoyceMC. Mechanics of the rate-dependent elastic-plastic deformation of glassy polymers from low to high strain rates. Int J Solids Struct2006; 43: 1331–1356.
