Multiscale analysis of interlaminar stresses near a free-edge in a [±45/0/90] s laminate

Abstract

A multiscale model for a [±45/0/90]_s tape laminate under uniaxial extension was used to investigate the effect of modeling the heterogeneous microstructure near a free-edge. A random fiber arrangement was used for the 0° and 90° plies and homogenized properties for the 45° and −45° plies. The predicted interlaminar normal stress was compared to the prediction using a classical homogeneous model. When fibers and matrix were modeled discretely, the local stress state was shown to be sensitive to the proximity of fibers, which caused a complex stress distribution along the 0–90 ply interface. Next, the effect of reducing the size of region modeled at the microscale was investigated, since this would significantly reduce the computational effort. Reducing the region modeled at the microscale in the direction normal to the 0–90 ply interface to a size that was 25% and 10% of the ply thickness only changed the peak stresses by 3% and 8%, respectively. Reducing the microscale region in the direction normal to the free-edge to be one and two ply thicknesses in size did not have a significant effect on the predicted interlaminar normal stress at points within 75% of a ply thickness of the free-edge.

Keywords

Fiber–matrix composite finite element analysis multiscale microscale free-edge stress

Get full access to this article

View all access options for this article.

References

Pagano

. Free edge stress fields in composite laminates. Int J Solids Struct 1978; 14: 401–406.

Raju IS, Whitcomb JD and Goree JG. A new look at numerical analyses of free-edge stresses in composite laminates. NASA Technical Report, NASA TP-1751, NASA Langley Research Center, VA, December 1980.

Whitcomb

Raju

Goree

. Reliability of the finite element method for calculating free edge stresses in composite laminates. Comput Struct 1982; 15: 23–37.

Feyel

Chaboche

J-L

. FE2 multiscale approach for modelling the elastoviscoplastic behaviour of long ®bre SiC/Ti composite materials. Comput Methods Appl Mech Eng 2000; 183: 309–330.

Nosier

Maleki

. Free-edge stresses in general composite laminates. Int J Mech Sci 2008; 50: 1435–1447.

Raghavan

Moorthy

Ghosh

, et al. Revisiting the composite laminate problem with an adaptive multi-level computational model. Compos Sci Technol 2001; 61: 1017–1040.

Chung S. Effects of interlaminar stress gradients on free edge delamination in composite laminates. PhD Thesis, Drexel University, Philedelphia, PA, 2003.

Rajender

Rajasekhar

Vijay

. Micromechanical modeling of fiber/epoxy unidirectional laminates using FEA. Int J Eng Sci 2015; 4: 54–75.

Pagano

Schoeppner

Kim

. Steady-state cracking and edge effects in thermo-mechanical transverse cracking of cross-ply laminates. Compos Sci Technol 1998; 58: 1811–1825.

10.

Ballard

McLendon

Whitcomb

. The influence of microstructure randomness on prediction of fiber properties in composites. J Compos Mater 2014; 48: 3605–3620.

11.

McLendon WR and Whitcomb JD. Micro-scale analysis for the prediction of strength under biaxial thermomechanical load. In: Proceedings of the American Society for Composites, 27th Technical Conference, Arlington, TX, 1-3 October 2012.

12.

Ballard MK. Random fiber/matrix model generator. 2017, https://cdmhub.org/resources/1410.

13.

Tsai S. Thin ply composites. In: 46th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference, Austin, Texas, 18–21 April 2005. DOI: 10.2514/6.2005-2005.

14.

Shewchuck

. Triangle: engineering a 2D quality mesh generator and Delaunay triangulator. Appl Comp Geom 1996; 1148: 203–222.

15.

Ballard MK and Whitcomb JD. Effect of heterogeneity at the fiber -matrix scale on predicted free-edge stresses for a [0°/90°]s laminated composite subjected to uniaxial tension. J Compos Mater 2018; 53(5): 625–639. DOI: 10.1177/0021998318788915.