For investigation on the effect of silane compound on practical properties of poplar wood polymer composite, samples were impregnated using vacuum/pressure method with 3-trimethoxysilyl propyl methacrylate, and subsequently with styrene, methyl methacrylate, and mixtures of styrene/methyl methacrylate. Field emission scanning electron microscopy observations and Fourier transform infrared analysis indicated that styrene/methyl methacrylate copolymerized with 3-trimethoxysilyl propyl methacrylate and the resultant polymer tightly contacted to the wood cell walls without noticeable gaps. Impregnation with styrene resulted in a higher density of wood polymer composite compared to methyl methacrylate, which was more obvious in the presence of 3-trimethoxysilyl propyl methacrylate. Mechanical strength of the wood polymer composites improved and the highest strength was obtained for the 3-trimethoxysilyl propyl methacrylate/styrene/methyl methacrylate-modified samples. Maximum hardness was found in 3-trimethoxysilyl propyl methacrylate/styrene/methyl methacrylate-modified samples due to the cross-link formation between modified cell wall and polymer.
SèbeGBrookMA. Hydrophobization of wood surfaces: covalent grafting of silicone polymers. Wood Sci Technol2001; 35: 269–282.
2.
BaysalEYalinkilicMKAltinokM, et al.Some physical, biological, mechanical, and fire properties of wood polymer composite (WPC) pretreated with boric acid and borax mixture. Constr Build2007; 21: 1879–1885.
3.
GhorbaniMNikkhah ShahmirzadiAAmininasabSM. Physical and morphological properties of combined treated wood polymer composites by maleic anhydride and methyl methacrylate. J Wood Chem Technol2017; 37: 443–450.
4.
EstevesBPereiraH. Wood modification by heat treatment: a review. BioResources2008; 4: 370–404.
5.
PriadiTHizirogluS. Characterization of heat treated wood species. Mater Des2013; 49: 575–582.
6.
SalcaEAHizirogluS. Evaluation of hardness and surface quality of different wood species as function of heat treatment. Mater Des2014; 62: 416–423.
7.
RautkariLKamkeFAHughesM. Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite. Wood Sci Technol2014; 45: 693–705.
8.
AbeIFukuharaTIwasakiS, et al.Development of a high density carbonaceous adsorbent from compressed wood. Carbon2001; 39: 1485–1490.
9.
LaineKSegerholKWålinderM, et al.Wood densification and thermal modification: hardness, set-recovery and micromorphology. Wood Sci Technol2016; 50: 883.
10.
DonathSMilitzHMaiC. Creating water-repellent effects on wood by treatment with silanes. Holzforschung2006; 60: 40–46.
11.
DeviRRMajiTK. Effect of glycidyl methacrylate on the physical properties of wood–polymer composites. Polym compos2007; 28: 1–5.
12.
IslamMSHamdanSHassanA, et al.The chemical modification of tropical wood polymer composites. J Compos Mater2014; 48: 783–789.
13.
LiYFXiao YingDZeGuangL, et al.Effect of polymer in situ synthesized from methyl methacrylate and styrene on the morphology, thermal behavior, and durability of wood. J Appl Polym Sci2012; 128: 1–8.
14.
HeWZhangQJiangS. Modification of fast growing poplar with styrene and glycidyl methacrylate. Int Wood Prod J2014; 5: 98–102.
15.
DongYYanYZhangY, et al.Combined treatment for conversion of fast-growing poplar wood to magnetic wood with high dimensional stability. Wood Sci Technol2016; 50: 503–517.
16.
ZhangYZhangSChuiYH, et al.Effect of impregnation and in-situ polymerization of methacrylates on hardness of sugar maple wood. J Appl Polym Sci2006; 99: 1674–1683.
17.
ZhangYZhangSYangDQ, et al.Dimensional Stability of wood polymer composites. J Appl Polym Sci2006; 102: 5085–5094.
18.
JaniMRozmanHDRahimS. Rubber wood-polymer composites: the effect of chemical impregnation on the mechanical and physical properties. MPJ2007; 2: 1–11.
19.
LuJZWuQMcNabbSH. Chemical coupling in wood fiber and polymer composites: a review of coupling agents and treatments. Wood Fiber Sci2000; 32: 88–104.
20.
WeiLMcDonaldAG. A review on grafting of biofibers for biocomposites. Materials2016; 9: 303.
21.
GhorbaniMAsghari AghmashhadiZAmininasabSM, et al.Effect of different coupling agents on chemical structure and physical properties of vinyl acetate/wood polymer composites. J Appl Polym Sci2019; 136(19): 47467.
22.
HazarikaAMajiTK. Modification of softwood by monomers and nanofillers. DSJ2014; 64: 262–272. .
23.
LiYLiuYXiangX, et al.Improvement of durability of wood by maleic anhydride. Int J Mater Metallu Eng2010; 4: 281–284.
24.
XieYHillCASXiaoZ, et al.Silane coupling agents used for natural fiber/polymer composites: a review. Compos Part A2010; 41: 806–819.
25.
HillCForsterSFarahaniM, et al.An investigation of cell wall micropore blocking as a possible mechanism for the decay resistance of anhydride modified wood. Int Biodeter Biodegr2005; 55: 69–76.
26.
HillCASMastery FarahaniMRHaleMDC. The use of alkoxysilane coupling agents for wood preservation. Holzforschung2004; 58: 316–325.
27.
GhorbaniMAsghari AghmashhadiZAmininasabSM, et al.Effect of different coupling agents on the thermal, mechanical and biological behavior of vinyl acetate-wood polymer composite. Holzforschung2019; 73(10): 967–973.
28.
TerzievNPanovD. Study on some alkoxysilanes used for hydrophobation and protection of wood against decay. Int Biodeter Biodegr2009; 63: 456–461.
29.
ScaffaroRMaioALoprestiF. Physical properties of green composites based on poly-lactic acid or Mater-Bi filled with Posidonia oceanica leaves. Compos Part A2018; 112: 315–327.
30.
ScaffaroRMaioAGulinoEF, et al.Structure–property relationship of PLA-Opuntia ficus indica biocomposites. Compos Part B2019; 167: 199–206.
31.
YoshikawaKKondoYKimuraE, et al.A lupane-triterpene and a 3(2→1)abeolupane glucoside from Hovenia trichocarea. Phytochemistry1998, pp. 2057–2060.
32.
GugumusF. Formation of ester functional groups in oxidizing polymers. Polym Degrad Stab1999; 65: 5–13.
33.
FaniranJAPatelKSBailarJC. Infrared spectra of n,n'-bis (salicylidene)-1,1-(dimethyl) ethylenediamine and its metal complexes. J Inorg nucl Chem1974; 36: 1547–1551.
34.
Andrea MaioAAgnelloSKhatibiR, et al.A rapid and eco-friendly route to synthesize graphene-doped silica nanohybrids. J Alloy Compd2016; 664: 428–438.
35.
ScaffaroRMaioALoprestiF, et al.Synthesis and self-assembly of a PEGylated-graphene aerogel. Compos Sci Technol2016; 28: 193–200.
36.
MunteanuSBVasileC. Spectral and thermal characterization of styrene-butadiene copolymers with different architectures. J Optoelectron Adv M2005; 7: 3135–3148.
37.
MaiCMilitzH. Modification of wood with silicon compounds. Inorganic silicon compounds and sol-gel systems: a review. Wood Sci Technol2004; 37: 339–348.
38.
RozmanHDKumarRNAbusamahA. Rubberwood-polymer composites based on glycidyl methacrylate and diallyl phthalate. J Appl Polym Sci1998; 67: 12–24.
39.
YildizÜCYildizSGezerED. Mechanical properties and decay resistance of wood polymer composites prepared from fast growing species in Turkey. Bioresource Technol2005; 96: 1003–1011.
40.
SchniederMHPhilipsJG. Physical properties of wood-polymer composites. Int J Fore Eng2000; 11: 83–89.
41.
LiYLiJLiuY, et al.Thermoforming of polymer from monomers in wood porous structure and characterization for wood-polymer composite. Mater Res Innov2011; 15: 446–449.
42.
ZhangYParkSJ. Enhanced interfacial interaction by grafting carboxylated-macromolecular chains on nanodiamond surfaces for epoxy-based thermosets. J Polym Sci Pol Phys2017. DOI:10.1002/polb.24522.
43.
ZhangYParkSJ. In-situ modification of nanodiamonds by mercapto-terminated silane agent for enhancing the mechanical interfacial properties of nitrile butadiene rubber nanocomposites. Polym Compos2017; 39(10): 3472–3481.
44.
IsmailHRosnahNRozmanHD. Effects of various bonding systems on mechanical properties of oil palm fibre reinforced rubber composites. Eur Polym J1997; 33: 1213–1238.
45.
IslamMSHamdanSHasanM, et al.Effect of coupling reactions on the mechanical and biological properties of tropical wood polymer composites (WPC). Int Biodeter Biodegr2012; 72: 108–113.
46.
Rowell RM. Handbook of wood chemistry and wood composites. Florida, USA: CRC press, 2005, p.381.
47.
EllisWD. Wood-polymer composites: review of processes and properties. Mol Cryst Liq Cryst2000; 353: 75–84.
48.
BucheltBWagenführA. Macroscopic and microscopic monitoring of swelling of beech wood after impregnation with furfuryl alcohol. Eur J Wood Wood Prod2012; 70: 865–869.
