Abstract
In this paper, a new experimental study of the bending static and fatigue behaviors of a composite material reinforced with 40% by mass of short glass fibers (type E) and polypropylene matrix is presented. The composite material is obtained in the form of plates by an injection process, which inevitably affects the distribution of the fibers and therefore the behavior of the material studied. To do this, several techniques are implemented on specimens by cutting them in transverse and longitudinal directions. The effect of aging in distilled water at 40℃ on the mechanical characteristics is studied under static and fatigue loading conditions. The static tests, three-point flexure up to failure, allow us to choose the levels of stress for the fatigue tests. The endurance curves as a function of the number of cycles are plotted by adapting the end-of-test criteria N5, N10, and N20, which represent a rigidity drop of 5%, 10%, and 20%, respectively. An interpretation of the Wöhler curve equations defined for the end-of-test criteria allows defining the kinetics of material damage. The results highlighted the influence of distilled water on the mechanical behavior and the lifetime of the material. We also perform macroscopic observations of fracture and microscopic facies in order to identify the damage mechanisms of the composite material.
Get full access to this article
View all access options for this article.