This study was conducted to investigate the synthesis, characterization and mechanical properties of aluminium reinforced with ferrotitanium and silicon carbide via stir casting technique. Microstructures of as-cast samples were analysed using optical and scanning electron microscopes equipped with energy-dispersive X-ray spectroscopy. The mechanical properties in terms of hardness, tensile, tribological behaviour and fracture were assessed. Results showed that the homogeneous dispersion of reinforcement was within the metal matrix composite. Tribological study revealed a decrease in frictional coefficient of the composites with lowest frictional coefficient observed in composite with addition of silicon carbide as reinforcement. Morphology of fractured surface displayed a reduction in the size of dimples formed in reinforced aluminium composites when compared with larger dimple sizes observed in as-cast aluminium alloy.
ObadeleBAIgeOOOlubambiPA. Fabrication and characterization of titanium-nickel-zirconia matrix composites prepared by spark plasma sintering. J Alloys Compound2017; 710: 825–830.
2.
BhandareRGSonawanePM. Preparation of aluminium matrix composite by using stir casting method. Int J Eng Adv Technol2013; 3: 2249–8958.
3.
Stir casting process for manufacture of Al–SiC composites. Rare Metal 2017; 36(7): 581–590.
4.
AkinwamideSO. Study of microstructural and mechanical properties of stir cast Al (SiC-Mg-TiFe) composite. Fluid Dyn Mater Process2019; 15(1): 15–26.
5.
KantSVermaAS. Stir casting process in particulate aluminium metal matrix composite: a review. Int J Mech Solid2017; 9(1): 61–69.
6.
SurappaM. Aluminium matrix composites: challenges and opportunities. Sadhana2003; 28(1–2): 319–334.
7.
SinglaMDwivediDDSinghL, et al.Development of aluminium based silicon carbide particulate metal matrix composite. J Miner Mater Character Eng2009; 8(6): 455–455.
8.
ReddyPSKesavanRRamnathBV. Investigation of mechanical properties of aluminium 6061-silicon carbide, boron carbide metal matrix composite. Silicon2016; 10(2): 1–8.
9.
Investigation of mechanical properties. Dordrecht: Springer Science+Business Media, 2017, p.9479.
10.
Hynes NRJ, Kumar R, Tharmaraj R, et al. (eds) Production of aluminium metal matrix composites by liquid processing methods. In: AIP conference proceedings, 2016. College Park, MD: AIP Publishing.
11.
EpsteinJSDeasonVAAbdallahMG. Interferometric studies of composite impact and deformation. Measurement1993; 12(1): 59–84.
12.
PanigrahiMParamguruRKGuptaRC, et al.An overview of production of titanium and an attempt to titanium production with ferro-titanium. High Temperat Mater Process2010; 29(5–6): 495–514.
13.
BodunrinMOAlanemeKKChownLH. Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. J Mater Res Technol2015; 4(4): 434–445.
14.
PawarPBUtpatAA. Development of aluminium based silicon carbide particulate metal matrix composite for spur gear. Proc Mater Sci2014; 6(Suppl C): 1150–1156.
15.
GlicksmanM. Free dendritic growth. Mater Sci Eng1984; 65(1): 45–55.
16.
Rohatgi P, Schultz B, Gupta N, et al. Solidification during casting of metal-matrix composites. In: ASM handbook. vol. 15. ASM, Ohio, USA, 2013, pp.390–397.
17.
VannanSEVizhianSP. Microstructure and mechanical properties of as cast aluminium alloy 7075/basalt dispersed metal matrix composites. J Miner Mater Character Eng2014; 2(3): 182–182.
18.
SharmaPSharmaSKhandujaD. A study on microstructure of aluminium matrix composites. J Asian Ceram Soc2015; 3(3): 240–244.
19.
KumarBPBirruAK. Microstructure and mechanical properties of aluminium metal matrix composites with addition of bamboo leaf ash by stir casting method. Trans Nonferrous Metal Soc China2017; 27(12): 2555–2572.
20.
StefanescuDM. Science and engineering of casting solidification, New York: Springer, 2015.
21.
YarAAMontazerianMAbdizadehH, et al.Microstructure and mechanical properties of aluminum alloy matrix composite reinforced with nano-particle MgO. J Alloy Compound2009; 484(1–2): 400–404.
22.
SajjadiSAEzatpourHPariziMT. Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes. Mater Des2012; 34: 106–111.
23.
VenkateswarluKSandhyaraniMNellaippanT, et al.Estimation of crystallite size, lattice strain and dislocation density of nanocrystalline carbonate substituted hydroxyapatite by X-ray peak variance analysis. Proc Mater Sci2014; 5: 212–221.
24.
MuraliMSambathkumarMSaravananMS. Micro structural and mechanical properties of AA 7075/TiO2 in situ composites. Univ J Mater Sci2014; 2(3): 49–53.
25.
HakimiMKameliPSalamatiH, et al.Evolution of microstructural and mechanical properties of nanocrystalline CO2FeAl Heusler alloy prepared by mechanical alloying. Powder Metall2013; 56(2): 111–116.
26.
KamraniSRiedelRReihaniSS. Microstructural evolution of Al composite powders reinforced by nanoand micrometric SiC particles during mechanical milling. Int J Metall Mater Eng2015; 1: 105–105.
27.
Nuruzzaman D and Kamaruzaman F (eds) Processing and mechanical properties of aluminium-silicon carbide metal matrix composites. In: IOP conference series: materials science and engineering, 2016. 12–14 November, 2015 in Kuala Lumpur, Malaysia. Bristol, UK: IOP Publishing.
AjibolaASOlayinkaDMOlalekanST. Production and microstructural analysis of as-cast and heat treated aluminum alloy (Al-20% wtMg). Adv Appl Sci Res2012; 3(4): 2196–2203.
30.
BoostaniAFTahamtanSJiangZ, et al.Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles. Compos Part A: Appl Sci Manuf2015; 68: 155–163.
31.
OñoroJ. High-temperature mechanical properties of aluminium alloys reinforced with titanium diboride (TiB2) particles. Rare Metal2011; 30(2): 200–200.
32.
SujanDOoZRahmanM, et al.Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. Int J Eng Appl Sci2012; 6(8): 288–291.
33.
XavierLFSureshP. Wear behavior of aluminium metal matrix composite prepared from industrial waste. Sci World J2016. Article ID 6538345. DOI: 10.1155/2016/6538345.
34.
SinghARanaASBalaN. Study of wear behaviour of aluminium based composite fabricated by stir casting technique. Int J Mech Eng Robot Res2015; 4(1): 271–271.
35.
RavindranathVShankarGSBasavarajappaS, et al.Dry sliding wear behavior of hybrid aluminum metal matrix composite reinforced with boron carbide and graphite particles. Mater Today Proc2017; 4(10): 11163–11167.
36.
AlanemeKKOlubambiPA. Corrosion and wear behaviour of rice husk ash – alumina reinforced Al–Mg–Si alloy matrix hybrid composites. J Mater Res Technol2013; 2(2): 188–194.
37.
AlanemeKKAdewaleTMOlubambiPA. Corrosion and wear behaviour of Al–Mg–Si alloy matrix hybrid composites reinforced with rice husk ash and silicon carbide. J Mater Res Technol2014; 3(1): 9–16.
38.
MitrovićSBabićMStojanovićB, et al.Tribological potential of hybrid composites based on zinc and aluminium alloys reinforced with SiC and graphite particles. Tribol Indus2012; 34(4): 177–185.
39.
BelloSARaheemIARajiNK. Study of tensile properties, fractography and morphology of aluminium (1xxx)/coconut shell micro particle composites. J King Saud Univ-Eng Sci2017; 29(3): 269–277.
40.
RanganathGSharmaSKrishnaM, et al.A study of mechanical properties and fractography of ZA-27/titanium-dioxide metal matrix composites. J Mater Eng Perform2002; 11(4): 408–413.
41.
KataiahGGirishD. The mechanical properties and fractography of aluminium 6061–TiO2 composites. Int J Pharm Stud Res2010; 1: 17–25.
