Sage Journals: Discover world-class research

Abstract

In this study, polyamide 6 and polypropylene (50/50 weight ratio) blend with 2 wt.% of single-walled carbon nanotubes was prepared by melt processing. Cryo-milling process was employed to produce the micro-sized powder form of polyamide 6. In order to evaluate the influence of polyamide 6 powder (PNPS2) on the morphology of blend, granule form of polyamide 6 (NPS2) was employed for comparison. Improvement of thermal conductivity (about 31% increase) was observed via development of fiber-like morphology of PNPS2, compared to NPS2 (co-continuous morphology). Due to small and coarse shape of polyamide 6 powder, it may hinder the coalescence of the polyamide 6 phase, resulting in the reduction of polyamide 6 nodules size, contributing to the development of fiber-like morphology. No statistical difference was found in the mechanical property of PNPS2 and NPS2. With a 60.43% of phase continuity of polyamide 6 phase in PNPS2, fiber-like morphology contributed to the increase of effective single-walled carbon nanotubes volume concentration with more filler-to-filler connection, resulting in the improvement in thermal conductivity.

Keywords

Polymer–matrix composites microstructures thermal conductivity single-walled carbon nanotube

Get full access to this article

View all access options for this article.

References

Tucker

III Moldenaers

. Microstructural evolution in polymer blends. Annu Rev Fluid Mech 2002; 34: 177–210.

Nasti

Gentile

Cerruti

et al.

Double percolation of multiwalled carbon nanotubes in polystyrene/polylactic acid blends. Polymer 2016; 99: 193–203.

Van Puyvelde

Velankar

Moldenaers

. Rheology and morphology of compatibilized polymer blends. Curr Opin Colloid Interface Sci 2001; 6: 457–463.

Hong

Kim

Ahn

et al.

Interfacial tension reduction in PBT/PE/clay nanocomposite. Rheologica Acta 2007; 46: 469–478.

Tambe

Sharma

. The effect of colloidal particles on fluid-fluid interfacial properties and emulsion stability. Adv Colloid Interfac 1994; 52: 1–63.

Sumita

Sakata

Asai

et al.

Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black. Polym Bull 1991; 25: 265–271.

Maiti

Shrivastava

Khatua

. Reduction of percolation threshold through double percolation in melt-blended polycarbonate/acrylonitrile butadiene styrene/multiwall carbon nanotubes elastomer nanocomposites. Polym Composite 2013; 34: 570–579.

Otero-Navas

Arjmand

Sundararaj

. Carbon nanotube induced double percolation in polymer blends: Morphology, rheology and broadband dielectric properties. Polymer 2017; 114: 122–134.

Arboleda-Clemente

García-Fonte

Abad

M-J

et al.

Role of rheology in tunning thermal conductivity of polyamide 12/polyamide 6 composites with a segregated multiwalled carbon nanotube network. J Compos Mater 2018; 52: 2549–2557.

10.

Lee

Cruz

Son

. Effects of incorporation of polyester on the electrical resistivity of polycarbonate/multi-walled carbon nanotube nanocomposite. J Compos Mater 2018. 0021998318801932.

11.

Zhang

X-S

Yui

et al.

Selective location and double percolation of short carbon fiber filled polymer blends: high-density polyethylene/isotactic polypropylene. Mater Lett 1998; 36: 186–190.

12.

Mao

Zhu

Jiang

. Design of electrical conductive composites: tuning the morphology to improve the electrical properties of graphene filled immiscible polymer blends. ACS Appl Mater Interface 2012; 4: 5281–5286.

13.

Cao

J-P

Zhao

et al.

High thermal conductivity and high electrical resistivity of poly (vinylidene fluoride)/polystyrene blends by controlling the localization of hybrid fillers. Compos Sci Technol 2013; 89: 142–148.

14.

Cao

J-P

Zhao

et al.

Improved thermal conductivity and flame retardancy in polystyrene/poly (vinylidene fluoride) blends by controlling selective localization and surface modification of SiC nanoparticles. ACS Appl Mater Interface 2013; 5: 6915–6924.

15.

Zhang

Wan

Zhang

. Morphology and electrical properties of polyamide 6/polypropylene/multi-walled carbon nanotubes composites. Compos Sci Technol 2009; 69: 2212–2217.

16.

Abbasi Moud

Javadi

Nazockdast

et al.

Effect of dispersion and selective localization of carbon nanotubes on rheology and electrical conductivity of polyamide 6 (PA6), Polypropylene (PP), and PA6/PP nanocomposites. J Polym Sci Pol Phys 2015; 53: 368–378.

17.

Zhou

Luo

Zou

et al.

Enhanced thermal conductivity of polyamide 6/polypropylene (PA6/PP) immiscible blends with high loadings of graphite. J Compos Mater 2016; 50: 327–337.

18.

Kalaitzidou

Fukushima

Drzal

. A new compounding method for exfoliated graphite–polypropylene nanocomposites with enhanced flexural properties and lower percolation threshold. Compos Sci Technol 2007; 67: 2045–2051.

19.

Zhang

Rastogi

Chen

et al.

Low percolation threshold in single-walled carbon nanotube/high density polyethylene composites prepared by melt processing technique. Carbon 2006; 44: 778–785.

20.

Villmow

Kretzschmar

Pötschke

. Influence of screw configuration, residence time, and specific mechanical energy in twin-screw extrusion of polycaprolactone/multi-walled carbon nanotube composites. Compos Sci Technol 2010; 70: 2045–2055.

21.

Pötschke

Paul

. Formation of co-continuous structures in melt-mixed immiscible polymer blends. J Macromol Sci Pol R 2003; 43: 87–141.

22.

Filippone

Romeo

Acierno

. Role of interface rheology in altering the onset of co-continuity in nanoparticle-filled polymer blends. Macromol Mater Eng 2011; 296: 658–665.

23.

Fenouillot

Cassagnau

Majesté

J-C

. Uneven distribution of nanoparticles in immiscible fluids: morphology development in polymer blends. Polymer 2009; 50: 1333–1350.

24.

McNally

Pötschke

Halley

et al.

Polyethylene multiwalled carbon nanotube composites. Polymer 2005; 46: 8222–8232.

25.

Kota

Cipriano

Duesterberg

et al.

Electrical and rheological percolation in polystyrene/MWCNT nanocomposites. Macromolecules 2007; 40: 7400–7406.

26.

Voulgaris

Petridis

. Emulsifying effect of dimethyldioctadecylammonium-hectorite in polystyrene/poly (ethyl methacrylate) blends. Polymer 2002; 43: 2213–2218.

27.

Van Gurp

Palmen

. Time-temperature superposition for polymeric blends. Rheol Bull 1998; 67: 5–8.

28.

Young

III . An essay on the cohesion of fluids. Philos Trans R Soc Lond 1805; 95: 65–87.

29.

Baudouin

A-C

Bailly

Devaux

. Interface localization of carbon nanotubes in blends of two copolymers. Polym Degrad Stabil 2010; 95: 389–398.

30.

Pötschke

Pegel

Claes

et al.

A novel strategy to incorporate carbon nanotubes into thermoplastic matrices. Macromol Rapid Comm 2008; 29: 244–251.

31.

Owens

Wendt

. Estimation of the surface free energy of polymers. J Appl Polym Sci 1969; 13: 1741–1747.

32.

Fowkes

. Attractive forces at interfaces. Indus Eng Chem 1964; 56: 40–52.

33.

. Calculation of interfacial tension in polymer systems. J Polym Sci C Polym Sympos 1971; 34: 19–30.

34.

Kirjava

Rundqvist

Holsti-Miettinen

et al.

Determination of interfacial tension between PA/PP and LCP/PP by IFR method and effect of compatibilization on interfacial tension. J Appl Polym Sci 1995; 55: 1069–1079.

35.

Baudouin

A-C

Devaux

Bailly

. Localization of carbon nanotubes at the interface in blends of polyamide and ethylene–acrylate copolymer. Polymer 2010; 51: 1341–1354.

36.

Pedrazzoli

Pegoretti

. Expanded graphite nanoplatelets as coupling agents in glass fiber reinforced polypropylene composites. Compos Part A Appl S 2014; 66: 25–34.

37.

Nuriel

Liu

Barber

et al.

Direct measurement of multiwall nanotube surface tension. Chem Phys Lett 2005; 404: 263–266.

38.

Khare

Bhattacharyya

Kulkarni

et al.

Influence of multiwall carbon nanotubes on morphology and electrical conductivity of PP/ABS blends. J Polym Sci Pol Phys 2008; 46: 2286–2295.

39.

Z-M

S-N

X-B

et al.

Carbon nanotubes can enhance phase dispersion in polymer blends. Polym Plast Technol Eng 2007; 46: 129–134.

40.

Kontopoulou

Liu

Austin

et al.

The dynamics of montmorillonite clay dispersion and morphology development in immiscible ethylene–propylene rubber/polypropylene blends. Polymer 2007; 48: 4520–4528.

41.

Vermant

Vandebril

Dewitte

et al.

Particle-stabilized polymer blends. Rheologica Acta 2008; 47: 835–839.

42.

Tallury

Pasquinelli

. Molecular dynamics simulations of flexible polymer chains wrapping single-walled carbon nanotubes. J Phys Chem B 2010; 114: 4122–4129.

43.

Ganß

Satapathy

Thunga

et al.

Structural interpretations of deformation and fracture behavior of polypropylene/multi-walled carbon nanotube composites. Acta Mater 2008; 56: 2247–2261.

44.

Chen

Ginzburg

Yang

et al.

Thermal conductivity of polymer-based composites: Fundamentals and applications. Prog Polym Sci 2016; 59: 41–85.

45.

Bigg

Electrical properties of metal-filled polymer composites. In: Bhattacharya

(ed). Metal-filled polymers: properties and applications, New York: Marcel Dekker, 1986, pp. 165–226.

46.

Gaska

Rybak

Kapusta

et al.

Enhanced thermal conductivity of epoxy–matrix composites with hybrid fillers. Polym Adv Technol 2015; 26: 26–31.

47.

Choi

Yoon

Jeong

S-S

. Morphology and thermal conductivity of polyacrylate composites containing aluminum/multi-walled carbon nanotubes. Compos Part A Appl S 2013; 45: 1–5.

48.

Lee

Shanefield

et al.

Enhanced thermal conductivity of polymer matrix composite via high solids loading of aluminum nitride in epoxy resin. J Am Ceram Soc 2008; 91: 1169–1174.

49.

Lim

Lee

Hur

et al.

Effects of MWCNT and nickel-coated carbon fiber on the electrical and morphological properties of polypropylene and polyamide 6 blends. Macromol Res 2014; 22: 632–638.

Characterization and morphological development of polypropylene/polyamide 6 blends using polyamide 6 powder and single-walled carbon nanotube

Abstract

Keywords

Get full access to this article

References