Masterbatches of polypropylene/clay obtained by in situ polymerization and melt-blended with commercial polypropylene

Abstract

In the present work, polypropylene nanocomposites were prepared from blends in the molten state of a commercial polypropylene and masterbatches of polypropylene/organophilic montmorillonite or polypropylene/organically modified sodic clay with different amounts of filler. The masterbatches were obtained by the method of in situ polymerization using fourth-generation Ziegler-Natta catalysts based on MgCl₂/TiCl₄ containing clay. We also evaluated the effect of adding maleated polypropylene on the properties of the blends. Materials were characterized by X-ray diffractometry, differential scanning calorimetry, dynamic-mechanical, and thermogravimetric analyses. Morphological stability of the blends was studied after annealing using the differential scanning calorimetry technique. The results showed an improvement in the mechanical properties of the blends compared to commercial polypropylene, and an increase of the clay basal spacing in the polymeric matrix was achieved, especially when maleated polypropylene is employed in the blend. Initial thermal degradation of the obtained nanocomposites increased by ∼80℃.

Keywords

Polypropylene nanocomposites in situ polymerization masterbatch melt blending

Get full access to this article

View all access options for this article.

References

Ataeefard

Moradian

. Polypropylene-organoclay nanocomposites: Effects of clay content on properties. Polym-Plastics Technol Eng 2011; 50: 732–739.

Zaman

Hun

Khan

et al.

Comparison of effect of surface-modified micro-/nano-mineral fillers filling in the polypropylene matrix. J Therm Compos Mater 2013; 26: 1100–1113.

Liu

Wang

. Morphology, rheological properties, and crystallization behavior of polypropylene/clay nanocomposites. Intern J Polym Mater Polym Biomater 2013; 62: 164–171.

Huang

. Isotactic poly(propylene)/ monoalkylimidazolium-modified montmorillonite nanocomposites: Preparation by intercalative polymerization and thermal stability study. Macromol Rapid Commun 2004; 25: 2008–2013.

Tarapow

Bernal

Alvarez

. Mechanical properties of polypropylene/clay nanocomposites: Effect of clay content, polymer/clay compatibility, and processing conditions. J Appl Polym Sci 2009; 111: 768–778.

Coiai

Amaro

Cicogna

et al.

Progress in understanding of the interactions between functionalized polyolefins and organo-layered double hydroxides. Macromol React Eng 2014; 8: 122–133.

Sánchez-Valdes

Méndez-Nonell

Ramos de Valle

et al.

Effect of different amine modified clays on the compatibility and clay dispersion of polypropylene nanocomposites. e-Polymers 2009; 9: 1499–1514.

Cui

Paul

. Evaluation of amine functionalized polypropylenes as compatibilizers for polypropylene nanocomposites. Polymer 2007; 48: 1632–1640.

Kumar

Singh

. Polypropylene clay nanocomposites. Rev Chem Eng 2013; 29: 439–448.

10.

Sushanta

Sanjay

Smita

. Polypropylene nanocomposites: Effect of organo-modified layered silicates on mechanical, thermal and morphological performance. J Therm Compos Mater 2008; 21: 243–263.

11.

YaWei

Dong

. Preparation of nano-compounded polyolefin materials through in situ polymerization technique: Status quo and future prospects. Chin Sci Bull 2009; 54: 38–45.

12.

Yang

Huang

Dong

. An in situ matrix functionalization approach to structure stabilization enhancement in polyethylene/ montmorillonite nanocomposites prepared by intercalative polymerization. Polymer 2007; 48: 6254–6254.

13.

Wang

et al.

Preparation of exfoliated isotactic polypropylene/ alkyltriphenylphosphonium-modified montmorillonite nanocomposites via in situ intercalative polymerization. Polymer 2006; 47: 1767–1771.

14.

Paukkeri

Lehtinen

. Thermal behaviour of polypropylene fractions:1. Influence of tacticity and molecular weight on crystallization and melting behavior. Polymer 1993; 34: 4075–4082.