Sage Journals: Discover world-class research

Abstract

This study is concerned with the influence of four metallic reinforcements on aluminum-silicon (AlSi) composites, with respect to wear behavior. AlSi-Ti; AlSi-Ti6Al4V; AlSi-1.4301 stainless steel and AlSi-Ni particulate reinforced composites were produced by a hot-pressing route. Microstructural characterization showed a uniform distribution of the reinforcing particles in the AlSi matrix. Reciprocating pin-on-plate wear tests were performed for AlSi and AlSi-based composites against gray cast iron plates. In order to compare the effect of different metallic particulates on the AlSi-based composites/gray cast iron tribopair wear performance, besides the pin, the counterface was also analyzed. The particle/matrix interface is analyzed in order to understand its influence on the tribopair behavior and on the controlling wear mechanisms. It was shown that the better compromise between both sliding surfaces performance was attained by AlSi-Ni/gray cast iron tribopair.

Keywords

Wear aluminum-silicon metal-reinforced aluminum composites hot pressing

Get full access to this article

View all access options for this article.

References

Ahmadi

Toroghinejad

Najafizadeh

. Evaluation of microstructure and mechanical properties of Al/Al2O3/SiC hybrid composite fabricated by accumulative roll bonding process. Mater Des 2014; 53: 13–19.

Rao

Das

. Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy composites. Mater Des 2010; 31: 1200–1207.

Modi

Prasad

Yegneswaran

. Dry sliding wear behaviour of squeeze cast aluminium alloy-silicon carbide composites. Mater Sci Eng A 1992; 151: 235–245.

Prasad

Shoba

. Hybrid composites – a better choice for high wear resistant materials. J Mater Res Technol 2014; 3: 172–178.

León-Patiño

Aguilar-Reyes

Bedolla-Becerril

. Dry sliding wear of gradient Al-Ni/SiC composites. Wear 2013; 301: 688–694.

Sannino

Rack

. Dry sliding wear of discontinuously reinforced aluminum composites: review and discussion. Wear 1995; 189: 1–19.

Wang

Rainforth

Jones

. Dry wear behaviour and its relation to microstructure of novel 6092 aluminium alloy–Ni3Al powder metallurgy composite. Wear 2001; 251: 1421–1432.

Alpas

Zhang

. Effect of SiC particulate reinforcement on the dry sliding wear of aluminium-silicon alloys (A356). Wear 1992; 155: 83–104.

Kumar

Pandey

Panwar

. Effect of particle size on wear of particulate reinforced aluminum alloy composites at elevated temperatures. J Mater Eng Perform 2013; 22: 3550–3560.

10.

Kiran

Kumar

Basavarajappa

. Dry sliding wear behavior of heat treated hybrid metal matrix composite using Taguchi techniques. Mater Des 2014; 63: 294–304.

11.

Ipek

. Adhesive wear behaviour of B4C and SiC reinforced 4147 Al matrix composites (Al/B4C–Al/SiC). J Mater Process Tech 2005. 162–163: 71–75.

12.

Baron

Wert

Gerard

. The processing and characterization of sintered metal-reinforced aluminium matrix composites. J Mater Sci 1997; 32: 6435–6445.

13.

Yadav

Bauri

. Nickel particle embedded aluminium matrix composite with high ductility. Mater Lett 2010; 64: 664–667.

14.

Thakur

Gupta

. Improving mechanical performance of Al by using Ti as reinforcement. Compos Part A Appl S 2007; 38: 1010–1018.

15.

Salmon

Boland

Colin

. Mechanical properties of aluminium/Inconel 601 composite wires formed by swaging. J Mater Sci 1998; 33: 5509–5516.

16.

Ravindran

Manisekar

Narayanasamy

. Tribological behaviour of powder metallurgy-processed aluminium hybrid composites with the addition of graphite solid lubricant. Ceram Int 2013; 39: 1169–1182.

17.

Miranda

Carvalho

Silva

. Effect of sintering stage in NiTi short-fibre-reinforced aluminium–silicon composites interface properties. J Compos Mater 2013; 47: 1625–1631.

18.

Miranda

Buciumeanu

Madeira

. Hybrid composites – metallic and ceramic reinforcements influence on mechanical and wear behavior. Compos Part B Eng 2015; 74: 153–165.

19.

Miranda

Buciumeanu

Carvalho

. Interface analysis and wear behavior of Ni particulate reinforced aluminum–silicon composites produced by PM. Compos Part B Eng 2015; 69: 101–110.

20.

López de Lacalle

Lamikiz

Campa

. Design and test of a multitooth tool for CFRP milling. J Compos Mater 2009; 43: 3275–3290.

21.

Huang

Xing

. Al-Ni intermetallic composites produced in situ by friction stir processing. J Alloy Comp 2010; 503: 494–499.

22.

Fernández-Valdivielso

López de Lacalle

Urbikain

. Detecting the key geometrical features and grades of carbide inserts for the turning of nickel-based alloys concerning surface integrity. Proc IME C J Mech Eng Sci 2015. DOI: 10.1177/0954406215616145.

23.

Bustillo

López de Lacalle

Fernández-Valdivielso

. Data-mining modeling for the prediction of wear on forming-taps in the threading of steel components. J Comput Des Eng 2016; 3: 337–348.

24.

Landeta

Fernández-Valdivielso

López de Lacalle

. Wear of form taps in threading of steel cold forged parts. ASME J Manuf Sci Eng 2015; 137: 031002–031002-11.

Metallic reinforcements role on aluminum silicon composites wear behavior

Abstract

Keywords

Get full access to this article

References