This study focuses on understanding and prediction of short-term thermal degradation of polymer matrix composites. One sided irradiation of two commercial composites (HexPly® 8552/IM7 and M18-1/G939) is carried out on specimens of various thickness (2, 4, 6 mm) at different heat fluxes (50 and 80 kW/m2) for various exposure times prior to ignition. The aim is to correlate the amount of the applied thermal energy with the heat damage and the residual mechanical strength. Among the two primary components of each matrix the epoxy resin is observed to degrade faster than the thermoplastic under thermal load, as measured by IR spectroscopy. A correlation is achieved between the interlaminar shear strengths and the relative amount of the residual matrix components. The interlaminar shear strengths and degradation processes are assessed in dependence of the applied energy per volume. The derived relationships and a chemometric analysis of IR spectra, can be used to rapidly estimate mechanical properties, as well as other properties of specimens with unknown thermal preload. Degradation processes are discussed in detail.
FangJHuXYueCY. Thermal degradation study of interpenetrating polymer network based on modified bismaleimide resin and cyanate ester. Polym Int2003; 52: 15–22.
5.
Pering GA, Farrell PV and Springer GS. Degradation of tensile and shear properties of composite exposed to fire or high temperature. J Compos Mater 1980; 14: 54–68.
6.
MilkeJAVizziniAJ. Thermal response of fibre-exposed composites. J Compos Technol Res JCTRER1991; 13: 145–151.
7.
GuettaBBunsellARBelinskiC. Effect of thermal spiking on carbon Toray 300B reinforced polystyrylpyridine composites: a kinetic, spectroscopic and mechanical study. Composites1989; 20: 461–465.
8.
Pritt HL. Thermal degradation of graphite–epoxy composites. Final report no. N62669-79-C-0270, Naval Air Development Center, 1980.
9.
BurchamLJEduljeeRFGillespieJW. Investigation on the microcracking behavior of bismaleimide composites: during thermal aging. Polym Compos1995; 16: 507–517.
10.
MasciaLZhangJ. Mechanical properties and thermal aging of a perfluoroether–modified epoxy resin in castings and glass fibre composites. Composites1995; 26: 379–385.
11.
EiblS. Influence of carbon fibre orientation on reaction-to-fire properties of polymer matrix composites. Fire Mater2012; 36: 309–324.
DaraIHAnkaraAAkovaliG. Heat damage assessment of carbon-fiber-reinforced polymer composites by diffuse reflectance infrared spectroscopy. J Appl Polym Sci2005; 96: 1222–1230.
14.
Shelley P, Vahey P, Werner G, et al. Handheld infrared spectroscopy for composite non-destructive testing. In: SAMPE 2011, Long Beach, CA, 23–26 May 2011.
15.
Polytec GmbH. Application note 204, Thermal damage in composites – correlation of short beam shear data with Fourier transform infrared spectroscopy. Polytec-Platz 1-7, D-76337 Waldbronn, Germany, 2010.
16.
Shelley P, Vahey P and Werner G. Thermal effect measurement with mid-infrared spectroscopy. Patent 2010/0038544 A1, USA, 2010.
17.
Shelley P, Vahey P, Werner G. (2011). Method of predicting thermal or chemical effect in a coated or painted composite material. US Patent 2011/001047 A1.
18.
WolfrumJEiblSLietchL. Rapid Evaluation of long-term thermal degradation of carbon fibre epoxy composites. Compos Sci Technol2009; 69: 523–530.
19.
EiblSWolfrumJ. Prospects to separately estimate temperature and duration of a thermal pre-load on a polymer matrix composite. J Compos Mater2013; 47: 3011–3025.
20.
Ng SJ, Cramer RJ and Mehrkam PA.Characterization of IM7/8552 polymer composites subjected to heat damage, Composites for the real world. In: Proceedings of the 29th international SAMPE technical conference, Orlando, FL, 1997, pp.776–786.
21.
MouritzAPGibsonAG. Fire properties of polymer composite materials, modelling the thermal response of composites in fire, Dordrecht, The Netherlands: Springer, 2006, pp. 133–161.
22.
DoddsNGibsonAGDewhurstD. Fire behaviour of composite laminates. Compos Part A2000; 31: 689–702.
23.
Seggewiß P. Experimentelle und numerische Untersuchung des Verhaltens kohlenstofffaserverstärkter Epoxidmatrix-Systeme unter einseitiger thermischer und gleichzeitig mechanischer Belastung, (Experimental and numeric investigation of epoxy based CFRP under simultanious thermal and mechanical load). PhD Thesis, University of the German armed Forces, Munich 2011.
24.
Hörold A, Schartel B, Trappe V, et al. Structural integrity in fire: an intermediate-scale approach. In: 15th European conference on composite material, Venice, Italy, 24–28 June 2012.
25.
ChenJKSunCTChangCI. Failure analysis of a graphite/epoxy laminate subjected to combined thermal and mechanical loading. J Compos Mater1985; 19: 408–423.
EiblS. Observing inhomogeneity of plastic components in carbon fibre reinforced polymer materials by ATR–FTIR-spectroscopy in the micrometer scale. J Compos Mater2008; 42: 1231–1246.
28.
ISO 5660:2002. Reaction-to-fire tests – heat release, smoke production and mass loss rate.
29.
EN 2563:1997: Aerospace series – carbon fibre reinforced plastics – unidirectional laminates; determination of apparent interlaminar shear strength.
30.
DIN 53765-F:1994. Testing of plastics and elastomeres; thermal analysis; DSC-method.
31.
Zeller K. Untersuchungen zum Brandverhalten von kohlenstofffaserverstärkten Kunststoffen (Investigations on reaction-to-fire properties of CFRP). Diploma Thesis, University of the German armed Forces, Munich 2007.
32.
DaoBHodkinJKrstinaJ. Accelerated aging versus realistic aging in aerospace composite materials, II chemistry of thermal aging in a structural composite. J Appl Polym Sci2006; 102: 3221–3232.
33.
BondzicSHodkinJKrstinaJ. Chemistry of thermal aging in aerospace epoxy composites. J Appl Polym Sci2005; 100: 2210–2219.
34.
HummelOSchollF. Infrared analysis of polymers resins and additives an atlas, 2, Weinheim: Verlag Chemie, 1998.
35.
MustoPRagostaGRussoP. Thermal-oxidative degradation of epoxy-bismaleimide networks: kinetics and mechanisms. Macromol Chem Phys2001; 202: 3445–3458.
36.
MarkHWorkmanJ. Chemometrics in spectroscopy, London: Academic Press, 2007.
37.
KesslerW. Multivariate data analysis, a handbook (Multivariate Datenanalyse, ein Lehrbuch), Weinheim, Germany: Wiley-VCH, 2007.
38.
Eibl S. Comparison of a surface and a bulk analytical technique for the distinct quantification of a moderate thermal pre-load on a polymer matrix composite. J Compos Mater (submitted).
39.
HeitzmannMTHouMVeidtM. Morphology of an interface between polyetherimide and epoxy prepreg. Adv Mater Res2012; 393: 184–188.
