Recently, a new manufacturing process for the production of metallic matrix composite materials reinforced with carbon nanotubes, known as sandwich technique has been proposed. This technique produces a material comprised of a metallic matrix and a banded structures-layers of multi-walled carbon nanotubes. However, among other issues, the matrix-reinforcement interface and the reinforcement dispersion degree are still open questions. The present study uses field emission scanning electron microscopy and high resolution transmission electron microscopy to probe that the method is capable to achieve a good dispersion of the multi-walled carbon nanotubes with no evidence of carbon nanotubes’ damage. The mechanical properties were measured by tensile and nanoindentation tests; improvements in the elastic modulus, yield and ultimate strengths were found, with respect to the unreinforced material.
IijimaS. Helical microtubules of graphitic carbon. Nature1991; 354: 56–58.
2.
BakshiSLahiriDAgarwalA. Carbon nanotube reinforced metal matrix composites-a review. Int Mater Rev2010; 55: 41–64.
3.
BakshiSRAgarwalA. An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites. Carbon2011; 49: 533–544.
4.
Pérez-BustamanteRPérez-BustamanteFEstrada-GuelI. Characterization of Al 2024-CNTs composites produced by mechanical alloying. Powder Technol2011; 212: 390–396.
5.
EsawiAMorsiKSayedA. Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites. Compos Sci Technol2010; 70: 2237–2241.
6.
ColemanJNKhanUGun'koYK. Mechanical reinforcement of polymers using carbon nanotubes. Adv Mater2006; 18: 689–706.
7.
MaP-CSiddiquiNAMaromG. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review. Compos Part A: Appl Sci Manuf2010; 41: 1345–1367.
Jianguo Z and Gang D. Mechanical properties of polyimide composite reinforced with carbon nanotubes and carbon fibers. J Thermoplast Compos Mater 2014; 28: 1250–1259.
10.
Kaka D, Rongong J, Hodzic A, et al. (eds) Dynamic mechanical properties of carbon nanotube-peek nanocomposite. In: 16th European conference on composite materials, Seville, Spain, 2014.
11.
LeeJHwangJLeeD. Enhanced mechanical properties of spark plasma sintered NiTi composites reinforced with carbon nanotubes. J Alloy Comp2014; 617: 505–510.
12.
CascalesATabaresNBartoloméJF. Processing and mechanical properties of mullite and mullite–alumina composites reinforced with carbon nanofibers. J Eur Ceram Soc2015; 36: 3613–3621.
13.
NguyenBNHenagerCH. Mode I fracture toughness prediction for multiwalled-carbon-nanotube reinforced ceramics. Eng Fract Mech2015; 147: 83–99.
14.
QianDDickeyE. In-situ transmission electron microscopy studies of polymer–carbon nanotube composite deformation. J Microsc2001; 204: 39–45.
15.
TreacyMJEbbesenTGibsonJ. Exceptionally high Young's modulus observed for individual carbon nanotubes. Nature1996; 381: 678–680.
16.
WongEWSheehanPELieberCM. Nanobeam mechanics: elasticity, strength, and toughness of nanorods and nanotubes. Science1997; 277: 1971–1975.
17.
CheJCaginTGoddardWAIII. Thermal conductivity of carbon nanotubes. Nanotechnology2000; 11: 70–76–70–76.
18.
JiangLFanGLiZ. An approach to the uniform dispersion of a high volume fraction of carbon nanotubes in aluminum powder. Carbon2011; 49: 1965–1971.
19.
SchwartzMM. Composite materials. Volume 2: Processing, fabrication, and applications, Upper Saddle River, NJ: Prentice-Hall International, 1997.
20.
DesaiAHaqueM. Mechanics of the interface for carbon nanotube–polymer composites. Thin-Wall Struct2005; 43: 1787–1803.
21.
MorsiKEsawiA. Effect of mechanical alloying time and carbon nanotube (CNT) content on the evolution of aluminum (Al)–CNT composite powders. J Mater Sci2007; 42: 4954–4959.
22.
KwonHEstiliMTakagiK. Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites. Carbon2009; 47: 570–577.
LiuQKeLLiuF. Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing. Mater Des2013; 45: 343–348.
25.
ShinSChoiHBaeD. Micro-alloying assisted consolidation of aluminum/carbon nanotubes powder. Mater Sci Eng A2014; 599: 46–50.
26.
Pérez-BustamanteREstrada-GuelIAmézaga-MadridP. Microstructural characterization of Al-MWCNT composites produced by mechanical milling and hot extrusion. J Alloy Comp2010; 495: 399–402.
Vidal-SetifMLancinMMarhicC. On the role of brittle interfacial phases on the mechanical properties of carbon fibre reinforced Al-based matrix composites. Mater Sci Eng A1999; 272: 321–333.
29.
IsazaCSierraGMezaJM. A novel technique for production of metal matrix composites reinforced with carbon nanotubes. J Manuf Sci Eng2016; 138: 024501–024501.
30.
LuKLagoRChenY. Mechanical damage of carbon nanotubes by ultrasound. Carbon1996; 34: 814–816.
31.
MukhopadhyayKDwivediCDMathurGN. Conversion of carbon nanotubes to carbon nanofibers by sonication. Carbon2002; 40: 1373–1376.
32.
Medina EscobarSAIsaza MerinoCAMeza MezaJM. Mechanical and thermal behavior of polyvinyl alcohol reinforced with aligned carbon nanotubes. Matéria (Rio de Janeiro)2015; 20: 794–802.
33.
EsawiAMorsiKSayedA. The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites. Compos Part A: Appl Sci Manuf2011; 42: 234–243.
CharlierJ-C. Defects in carbon nanotubes. Acc Chem Res2002; 35: 1063–1069.
36.
OlayoRGarciaEGarcia-CorichiB. Poly (vinyl alcohol) as a stabilizer in the suspension polymerization of styrene: The effect of the molecular weight. J Appl Polym Sci1998; 67: 71–77.
37.
ChaSIKimKTLeeKH. Strengthening and toughening of carbon nanotube reinforced alumina nanocomposite fabricated by molecular level mixing process. Scr Material2005; 53: 793–797.
38.
YangMScottV. Interface and fracture of carbon fibre reinforced Al-7 wt% Si alloy. J Mater Sci1991; 26: 1609–1617.
39.
TiryakioğluMRobinsonJSalazar-GuapuricheM. Hardness–strength relationships in the aluminum alloy 7010. Mater Sci Eng A2015; 631: 196–200.
