This study contributes to the understanding of the mechanism behind process-induced distortions and stresses related to the Resin Transfer Moulding manufacturing process. The objective is to comprehend the phenomena and to identify related parameters. During the manufacturing process, engineering constants of the matrix are changing and are influenced by the existence of a large number of effects. A viscoelastic material model has been derived. This developed material model integrates a dependency of the time–temperature–polymerisation and fibre volume content on the relaxation behaviour of residual stresses in a transversally isotropic reinforced material. The model is validated using a test case on the coupon level and results / limitations are discussed.
Spröwitz T, Tessmer J and Wille T. Process simulation in fiber-composite manufacturing – Spring-In. In: NAFEMS Seminar: simulating composite materials and structures, Bad Kissingen, Germany, 6–7 November 2007.
2.
AlbertCFernlundG. Spring–in and warpage of angled composite laminates. Compos Sci Technol2002; 62: 1895–1912.
3.
SvanbergJHolmbergMAndersJ. Prediction of shape distortions Part I. FE-implementation of a path dependent constitutive model. Compos: Part A2004; 35: 711–721.
4.
VDI-2014, Part 1-3 Beut Verlag, 2006.
5.
Nelson RH and Cairns DS. Prediction of dimensional changes in composite laminates during cure. In: 34th International SAMPE symposium and exhibition, Milan, Italy, 28 November 1989, pp.2397–2410.
6.
Zobeiry N. Viscoelastic constitutive models for evaluation of residual stress in thermoset composite during cure. PhD Thesis, University of British Columbia, Vancouver, Canada, 2006.
7.
DarrowAD. Isolating components of processing induced warpage in laminated composites. J Compos Mater2002; 36: 2407–2419.
8.
HarperBDWeitsmannY. Effect of residual stress in polymer matrix composite. J Astronaut Sci1984; 32: 253–267.
StangoRJWangSS. Process-induced residual thermal stress in advanced fibre reinforced composite laminates. J Eng Indus1984; 106: 48–54.
11.
BraunerCBlockTBHerrmannAS. Meso level manufacturing simulation of sandwich structures to analyse viscoelastic dependent residual stresses. J Compos Mater2012; 46: 783–799.
12.
FernlundGOsoolyAPoursartipA. Finite element based prediction of process-induced deformation of autoclaved composite structures using 2D process analysis and 3D structural analysis. Compos Struct2003; 62: 223–234.
13.
BogettiTAGillespieJW. Process-induced stress and deformation in thick section thermoset composite laminates. J Compos Mater1992; 26: 620–660.
14.
WhiteSRHahnHT. Process modeling of composite materials: residual stress development during cure. Part I. Model formulation. J Compos Mater1992; 26: 2402–2422.
15.
Johnston A. An integrated model of the development of process-induced deformation in autoclave processing of composites structures. PhD Thesis, The University of British Columbia, Vancouver, Canada, 1996.
16.
FernlundGPoursartipATwiggG. Experimental and numerical study of the effect of cure cycle, tool surface, geometry and lay-up on the dimensional fidelity of autoclave – processed composite parts. Compos Part A: Appl Sci Manuf2002; 33: 341–351.
17.
Abou MsallemYJacqueminFBoyardN. Material characterization and residual stresses simulation during the manufacturing process of epoxy matrix composites. Compos: Part A2010; 41: 108–115.
18.
MartinJEAdolfD. Constitutive equation for cure-induced stresses in a viscoelastic material. Macromolecules1990; 23: 5014–5019.
19.
BlumenstockT. Analyse der Eigenspannungen während der Aushärtung von Epoxidharzmassen, Stuttgart, Germany: Institut für Kunststofftechnik Universität Stuttgart, 2003.
20.
SchwarzlFStavermanAJ. Time-temperature dependence of linear viscoelastic behaviour. J Appl Phys1952; 23: 838–843.
21.
Wijskamp S. Shape distorsions in composite forming. PhD Thesis, University Twente, The Netherlands, 2005.
WhiteSRKimYK. Process-induced residual stress analysis of AS4/3501-6 composite material. Mech Compos Mater Struct1996; 5: 153–186.
24.
Prasatya P. A viscoelastic model for predicting isotropic residual stresses in thermosetting materials. PhD Thesis, University of Pittsburgh, 2001.
25.
ZocherMGroovesSAllenD. A three dimensional finite element formulation for thermoviscoelastic media. Int J Numer Meth Eng1997; 40: 2267–2288.
26.
Airbus datasheet, 75-t-2-0601, Werkstoff Handbuch Strukturtechnologie und Versuche, Ausgabe 2/ 1.1.2002.
27.
HexFlow RTM6, Product Data Sheet, www.hexcel.com (2007).
28.
BraunerCBlockTBPurolH. Microlevel manufacturing process simulation of carbon fiber/epoxy composites to analyze the effect of chemical and thermal induced residual stresses. J Compos Mater2012; 46: 2123–2143.
29.
Wenzel M. Spannungsbildung und Relaxationsverhalten bei der Aushärtung von Epoxidharzen, Dissertation TU Darmstadt, Fachbereich Physik, 2005.
30.
RuizETrochuF. Numerical analysis of cure temperature and internal stresses in thin and thick RTM parts. Compos Part A2006; 36: 806–826.
31.
Schweer J. Charakterisierung und Analyse des Kriechverhaltens von duromeren Faserverbundwerkstoffen. Bachelor Thesis, University Bremen, 2012.
32.
MederG. Zur praktischen Berechnung linear-viskoelastischer Probleme, Rheol. Acta1981; 20: 517–525.
33.
BraunerCBauerSHerrmannAS. Analysing process-induced deformation and stresses using a simulated manufacturing process for composite multispar flaps. J Compos Mater2015; 49(4): 387–402.
34.
BraunerCSopranoPHerrmannAS. Cure-dependent thermo-chemical modelling and analysis of the manufacturing process of an aircraft composite frame. J Compos Mater2015; 49(8): 921–938.
35.
Karkanas P. Cure modelling and monitoring of epoxy/amine resin systems. PhD Thesis, Cranfield University, 1997, vol 49, no 8, pp.921–938.
36.
Puck A. Festigkeitsanalyse von Faser-Matrix-Laminaten Modelle für die Praxis. C. Hanser Verlag, 1996. ISBN 3-446-18194-6.
