Porous mullite/alumina-layered composites with a graded porosity fabricated by camphene-based freeze casting

Abstract

A freeze casting technique was processed to fabricate porous mullite/alumina-layered composite with a gradient in porosity and pore size. In this work, a camphene/coal fly ash slurry system with an appropriate addition of Al₂O₃ was used. The pore channels with circular-shaped cross-sections were aligned along the solidification direction of molten camphene and connected with each other. The pore morphology was influenced by the starting solids loading and sintering temperature. The compressive strength of monolithic specimen greatly decreased when the porosity increased. However, the layered composites with a graded porosity exhibited improved compressive strength with minor decrease in porosity, probably due to the formation of residual compressive stress and relatively dense glass phase in the outer layer.