A phenomenological study was carried out on laminated carbon fibre-reinforced polymer composites subjected to constant amplitude fatigue loading. Visualization of damage progression was performed using a high-resolution Skyscan micro-computed tomography unit which provided detailed information on propagation of initially occurring cracks throughout fatigue life at specific intervals. Quantitative analysis of image sequences of virtual cross-sections throughout the three orthogonal planes of the sample resulted in defining fatigue crack growth rates, da/dn for each plane, which was interpreted in terms of the three damage modes: opening (mode I), in-plane shear (mode II) and out-of-plane shear (mode III). By applying linear elastic fracture mechanics laws, strain energy release rates were calculated and then used in a cohesive zone model formulation to define model parameters. Considering a bi-linear triangular cohesive zone model curve, maximum traction and maximum separation were calculated for each of the three damage modes, differentiating between modes II and III in a novel manner.
Tomblin J and Seneviratne W. Determining the fatigue life of composite aircraft structures using life and load-enhancement factors. U.S. Department of Transportation Federal Aviation Administration, Washington, DC, 2011.
2.
AC No: 25.571-1D. Damage tolerance and fatigue evaluation of structure. U.S. Department of Transportation Federal Aviation Administration, Washington, DC, 2011.
3.
BlancoNGamstedtEKAspLE. Mixed-mode delamination growth in carbon–fibre composite laminates under cyclic loading. Int J Solids Struct2004; 41: 4219–4235.
4.
HarperPWHallettSR. A fatigue degradation law for cohesive interface elements – development and application to composite materials. Int J Fatigue2010; 32: 1774–1787.
5.
YangQCoxB. Cohesive models for damage evolution in laminated composites. Int J Fract2005; 133: 107–137.
6.
SinghCVTalrejaR. Evolution of ply cracks in multidirectional composite laminates. Int J Solids Struct2010; 47: 1338–1349.
7.
KumarRSTalrejaR. A continuum damage model for linear viscoelastic composite materials. Mech Mater2003; 35: 463–480.
8.
KuraishiATsaiSWLiuKKS. A progressive quadratic failure criterion, part B. Compos Sci Technol2002; 62: 1683–1695.
9.
CuntzeRG. The predictive capability of failure mode concept-based strength criteria for multi-directional laminates – part B. Compos Sci Technol2004; 64: 487–516.
10.
ZinovievPALebedevaOVTairovaLP. A coupled analysis of experimental and theoretical results on the deformation and failure of composite laminates under a state of plane stress. Compos Sci Technol2002; 62: 1711–1723.
11.
BogettiTAHoppelCPRHarikVM. Predicting the nonlinear response and failure of composite laminates: correlation with experimental results. Compos Sci Technol2004; 64: 477–485.
12.
PuckASchürmannH. Failure analysis of FRP laminates by means of physically based phenomenological models. Compos Sci Technol2002; 62: 1633–1662.
13.
GotsisPKChamisCCMinnetyanL. Prediction of composite laminate fracture: micromechanics and progressive fracture. Compos Sci Technol1998; 58: 1137–1149.
14.
TalrejaRSinghCV. Damage and failure of composite materials, New York; Cambridge, UK: Cambridge University Press, 2012.
15.
WhitneyJMBrowningCEHoogstedenW. A double cantilever beam test for characterizing mode I delamination of composite materials. J Reinf Plast Compos1982; 1: 297–313.
16.
de MouraMFSFCampilhoRDSGGonçalvesJPM. Pure mode II fracture characterization of composite bonded joints. Int J Solids Struct2009; 46: 1589–1595.
17.
BenzeggaghMLKenaneM. Measurements of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos Sci Technol1996; 56: 439–449.
18.
AspLESjögrenAGreenhalghE. Delamination growth and thresholds in a carbon/epoxy composite under fatigue loading. J Compos Technol Res2001; 23: 55–68.
19.
de MouraMFSFGonçalvesJPM. Development of a cohesive zone model for fatigue/fracture characterization of composite bonded joints under mode II loading. Int J Adhes Adhes2014; 54: 224–230.
20.
BuffiereJMaireEAdrienJ. In Situ experiments with X-ray tomography: an attractive tool for experimental mechanics. Exp Mech2010; 50: 289–305.
21.
SchillingPJKaredlaBPRTatiparthiAK. X-ray computed microtomography of internal damage in fibre reinforced polymer matrix composites. Compos Sci Technol2005; 65: 2071–2078.
22.
BayraktarEAntolonovichSBathiasC. Multiscale study of fatigue behaviour of composite materials by Χ-rays computed tomography. Int J Fatigue2006; 28: 1322–1333.
23.
LittleJEYuanXJonesMI. Characterization of voids in fibre reinforced composite materials. NDT E Int2012; 46: 122–127.
24.
TiseanuITsitroneEKreterA. X-ray micro-tomography studies on carbon based composite materials for porosity network characterization. Fusion Eng Des2011; 86: 1646–1651.
25.
CenteaTHubertP. Measuring the impregnation of an out-of-autoclave prepreg by micro-CT. Compos Sci Technol2010; 71: 593–599.
26.
AwajaFNguyenM-TZhangS. The investigation of inner structural damage of UV and heat degraded polymer composites using X-ray micro CT. Compos Part A2011; 42: 408–418.
27.
ElAgamy N, Laliberté J, Gaidies F, et al. Qualitative characterization of fatigue damage propagation in laminated carbon fibre reinforced polymers by using micro-computed tomography. In: SAMPE conference (Society for Advanced Materials and Process Engineering), Seattle WA, USA, 2–6 June 2014.
28.
CosmiFBernasconiA. Micro-CT investigation on fatigue damage evolution in short fibre reinforced polymers. Compos Sci Technol2013; 79: 70–76.
29.
WrightPFuXSinclairI. Ultrahigh resolution computed tomography of damage in notched carbon fibre-epoxy composites. J Compos Mater2008; 42: 1993–2002.
30.
WrightPMoffatASinclairI. High resolution tomographic imaging and modelling of notch tip damage in a laminated composite. Compos Sci Technol2010; 70: 1444–1452.
31.
ScottAEMavrogordatoMNWrightP. In situ fibre fracture measurement in carbon/epoxy laminates using high resolution computed tomography. Compos Sci Technol2012; 71: 1471–1477.
32.
ASTM Standard D5766/D5766M. Standard test method for open-hole tensile strength of polymer matrix composite laminates, West Conshohocken: ASTM International, PA, 2011.
33.
Lourenço BVG. Damage tolerance design for wing components – procedure standardization. M.A.Sc. thesis, Universidade Técnica de Lisboa, 2010.
ElAgamy N, Martin C, Sachdeva T, et al. Proposed procedure to simulate 3D multi-mode fatigue behaviour in laminated CFRP using micro-CT scans in ABAQUS. In: CAMX conference (The Composites and Advanced Materials Expo), Orlando FL, USA, 12–16 October 2014.
36.
PrewittJMSMendelsohnML. The analysis of cell images. Ann New York Acad Sci1966; 128: 1035–1053.
