The present work focuses on investigating the effects of moisture absorption on the mechanical and thermal properties of epoxy reinforced with percentage (by wt.) silicon carbide (nano and micro-metric) composites. In order to quantify the effect of moisture and temperature on aging, the specimens were exposed to three aging conditions for 30 days. Variations of Tg (glass transition temperature), water absorption, and mechanical properties were determined as a function of exposure time.
In composite materials, aging depends on the exposure conditions, such as amount of absorbed water, temperature, and oxygen concentration. All these factors affect the thermal and mechanical properties. At room temperature and 95% relative humidity, plasticizing and swelling occur, with mechanical properties loss. At 60℃ and 5% relative humidity, polymeric chains crosslink resulting in mechanical properties improvement; Tg and thermal conductivity increase. At 60℃ and 95% relative humidity, the time required to reach saturation decreases when compared to room temperature evaluated condition, as the exposure temperature increases.
XingZZhouXLyuZ. Effect of SiC content on the erosion and wear resistance of epoxy/SiC composite. J Mater Eng2013; 6: 61–67.
2.
WongCPBollampallyRS. Thermal conductivity, elastic modulus, and coefficient of thermal expansion of polymer composites filled with ceramic particles for electronic packaging. J Appl Polym Sci1999; 74: 3396–3403.
3.
GonzálezFGarciaMELeyvaAA. Durability of adhesives based on different epoxy/aliphatic amine networks. Int J Adhes Adhes2011; 31: 177–181.
4.
PerrinFXNguyenMHVernetJL. Water transport in epoxy–aliphatic amine networks—influence of curing cycles. Eur Polym J2009; 45: 1524–1534.
5.
RayBC. Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites. J Coll Interf Sci2006; 298: 111–117.
6.
Pérez-PachecoECauich-CupulJIValadez-GonzálezA. Effect of moisture absorption on the mechanical behavior of carbon fiber/epoxy matrix composites. J Mater Sci2013; 48: 1873–1882.
7.
RodriguezF. Principle of polymer systems, 4th ed. London: Taylor & Francis, 1996.
8.
KinlochAJ. Adhesion and adhesives: science and technology, London: Chapman & Hall, 1995.
9.
MeiserAWillstrandKPossartW. Influence of composition, humidity, and temperature on chemical aging in epoxies: a local study of the interphase with air. J Adhes2010; 86: 222–243.
HuangGSunH. Effect of water absorption on the mechanical properties of glass/polyester composites. Mater Design2007; 28: 1647–1650.
12.
RamiresMLVNieto de CastroCANagasakaY. Standard reference data for the thermal conductivity of water. J Phys Chem Ref Data1995; 24: 1377–1381.
13.
BerryNGD’AlmeidaJRMBarciaFL. Effect of water absorption on the thermal-mechanical properties of HTPB modified DGEBA-based epoxy systems. Polym Test2007; 26: 262–267.
14.
LinYCChenX. Moisture sorption-desorption-resorption characteristics and its effect on the mechanical behavior of the epoxy system. Polymer2005; 46: 11994–12003.
15.
HanXCrocombeADAnwarSNR. The effect of a hot-wet environment on adhesively bonded joints under a sustained load. J Adhes2014; 90: 420–436.
16.
AhmadZAnselMPSmedleyD. Effect of nano-and micro-particle additions on moisture absorption in thixotropic room temperature cure epoxy-based adhesives for bonded-in timber connections. Int J Adhes Adhes2010; 30: 448–455.
17.
del RealJCCano de SantayanaMAbenojarJ. Adhesive bonding of aluminium with structural acrylic adhesives: durability in wet environments. J Adhes Sci Technol2006; 20: 1801–1818.
18.
AbenojarJMartinezMAVelascoF. Effect of moisture and temperature on the mechanical properties of an epoxy reinforced with boron carbide. J Adhes Sci Technol2011; 25: 2445–2460.
19.
HussainFHojjatiMOkamotoM. Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview. J Compos Mater2006; 40: 1511–1565.
20.
AbenojarJMartínezMAPantojaM. Epoxy composite reinforced with nano and micro SiC particles: curing kinetics and mechanical properties. J Adhes2012; 88: 418–434.
DennisHRHunterDLChangD. Nanocomposites: the importance of processing. Plast Eng2001; 1: 56–60.
24.
WangQXiaHZhangC. Preparation of polymer/inorganic nanoparticles composites through ultrasonic irradiation. J Appl Polym Sci2001; 80: 1478–1488.
25.
RodgersRMMahfuzHRangariVK. Infusion of SiC nanoparticles into SC-15 epoxy: an investigation of thermal and mechanical response. Macromol Mater Eng2005; 290: 423–429.
26.
NgCBSchadlerLSSiegelRW. Synthesis and mechanical properties of TiO2-epoxy nanocomposites. Nanostruct Mater1999; 12: 507–510.
27.
FrigioneMAielloMANaddeoC. Water effects on the bond strength of the concrete/concrete adhesive joints. Constr Build Mater2006; 20: 957–970.
28.
HakvoortGVan ReijenLL. Measurement of the thermal conductivity of solid substances by DSC. Thermochim Acta1985; 93: 317–320.
29.
RiesenR. Simple determination of the thermal conductivity of polymers by DSC. Mettler Toledo UserCom2005; 22: 19–23.
30.
AgariYUedaANagaiS. Thermal conductivity of a polymer composites. J Appl Polym Sci1993; 49: 1625–1634.
31.
AlamriHILowW. Effect of water absorption on the mechanical properties of nano-filler reinforced epoxy nanocomposites. Mater Design2012; 42: 214–222.
32.
AdamsonMJ. Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials. J Mater Sci1980; 15: 1736–1745.
33.
ChangYJChenCTTobolskyAV. Correlations between types of adsorbed water molecules and water permeability in swollen polymer membranes. J Polym Sci Polym Phys Ed1974; 12: 1–6.
34.
ChiangMYMFernandez-GarciaM. Relation of swelling and Tg depression to the apparent free volume of a particle-filled, epoxy-based adhesive. J Appl Polym Sci2003; 87: 1436–1444.
35.
MojunLPeiyiWYifuD. Study on diffusion behavior of water in epoxy resins cured by active ester. Phys Chem Chem Phys2003; 5: 1848–1852.
36.
WongTCBroutmanL. Moisture diffusion in epoxy resins part l. Non-Fickian sorption processes. J Polym Eng Sci1985; 25: 521–528.
37.
CrankJ. The mathematics of diffusion, Oxford: Claredon Press, 1975.
38.
BarralLCanoJLópezJ. Water absorption of tetrafunctional/phenol novolac epoxy mixtures cured with DDS. Bol Soc Esp Cerám Vidrio1997; 36: 246–247.
39.
WeimerAW. Carbide, nitride and boride materials synthesis and processing, London: Chapman and Hall, 1997.
40.
YamamotoYUraA. Influence of interposed wear particles on the wear and friction of silicon carbide in different dry atmospheres. Wear1992; 154: 141–150.
41.
AnderssonPBlomberA. Instability in the tribochemical wear of silicon carbide in unlubricated sliding contacts. Wear1994; 174: 1–7.
42.
TakadoumJSigaZRoques-CarmesC. Wear mechanism of silicon carbide, new observations. Wear1994; 174: 239–242.
43.
MijovicJWeinsteinSA. Moisture diffusion into a graphite epoxy composite. Polym Commun1985; 26: 237–239.
44.
KelleyFNBuecheF. Viscosity and glass temperature relations for polymer–diluent systems. J Polym Sci1961; 50: 549–556.
45.
ZhouJLucasJP. Hygrothermal effects of epoxy resin. Part II: variations of glass transition temperature. Polymer1999; 40: 5513–5522.
46.
ZhangYAdamsRDda SilvaLF. Absorption and glass transition temperature of adhesives exposed to water and toluene. Inter J Adhes Adhes2014; 50: 85–92.
47.
AbachaNKubouchiMTsudaK. Performance of epoxy-nanocomposite under corrosive environment. Express Polym Lett2007; 1: 364–369.
48.
BuehlerFUSeferisJC. Effect of reinforcement and solvent content on moisture absorption in epoxy composite materials. Compos Part A2000; 31: 741–748.
49.
ZhuHGLeungCKYKimJK. Tensile properties degradation of GFRP composites containing nanoclay in three different environments. J Compos Mater2011; 46: 2179–2192.
50.
AbenojarJVelascoFMartínezMA. Influence of post-curing on the mechanical properties of an epoxy resin reinforced with SiC: statistical study. Rev Iber Polímeros2009; 10: 166–179.
