Although most tests on composites are conducted uniaxially, they are subjected to multi-axial loads in real-life applications. In this paper, the behavior of unnotched and open-hole unidirectional carbon epoxy crossply laminates under various off-axis biaxial tension-compression loadings is studied using a mixed experimental and numerical approach. Strain measurements made using digital image correlation technique in cruciform test specimens show overall good correlation with finite element predictions based on the micromechanics of failure theory and material property degradation method. It is shown that an aligned mesh concept where element edges are aligned with ply fiber direction is necessary for accurate prediction of progressive failure patterns. The finite element model is shown to be capable of predicting critical and sub-critical damage mechanisms governing failure in these laminates. Furthermore, the detrimental effect of off-axis loading and the introduction of an open-hole in carbon epoxy crossply laminates under the biaxial loading are investigated quantitatively.
Hinton M, Kaddour A and Soden P. Predicting failure in fibre composites: Lessons learned from the World-Wide Failure Exercise. Technical Papers - Society of Manufacturing Engineers. 2002.
2.
LamkanfiEVan PaepegemWDegrieckJ. Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 2: Influence of geometrical discontinuities. Polym Test2010; 29: 132–138.
3.
SmitsAVan HemelrijckDPhilippidisTP. Design of a cruciform specimen for biaxial testing of fibre reinforced composite laminates. Compos Sci Technol2006; 66: 964–975.
4.
AntoniouAEVan HemelrijckDPhilippidisTP. Failure prediction for a glass/epoxy cruciform specimen under static biaxial loading. Compos Sci Technol2010; 70: 1232–1241.
5.
LamkanfiEVan PaepegemWDegrieckJ. Strain distribution in cruciform specimens subjected to biaxial loading conditions. Part 1: Two-dimensional versus three-dimensional finite element model. Polym Test2010; 29: 7–13.
6.
RamaultCMakrisAVan HemelrijckD. Comparison of different techniques for strain monitoring of a biaxially loaded cruciform specimen. Strain2011; 47: 210–217.
7.
WelshJSAdamsDF. An experimental investigation of the biaxial strength of IM6/3501-6 carbon/epoxy cross-ply laminates using cruciform specimens. Compos Part A: Appl Sci Manuf2002; 33: 829–839.
8.
WelshJSMayesJSBisknerAC. 2-D biaxial testing and failure predictions of IM7/977-2 carbon/epoxy quasi-isotropic laminates. Compos Struct2006; 75: 60–66.
9.
GowerMRLShawRM. Towards a planar cruciform specimen for biaxial characterisation of polymer matrix composites. Appl Mech Mater2010; 24–25: 115–120.
10.
MakrisARamaultCVan HemelrijckD. An investigation of the mechanical behavior of carbon epoxy cross ply cruciform specimens under biaxial loading. Polym Compos2010; 31: 1554–1561.
11.
YuanchenHHaSKKoyanagiJ. Effects of an open hole on the biaxial strengths of composite laminates. J Compos Mater2010; 44: 2429–2445.
12.
HaSKKyo KookJYuanchenH. Micro-mechanics of failure (MMF) for continuous fiber reinforced composites. J Compos Mater2008; 42: 1873–1895.
13.
Susuki I and Ishikawa H. Designing of cruciform specimen for strength evaluation of composite laminate. Advanced Materials for Future Industries: Needs and Seeds, 1991, pp. 447–454.
14.
ASTM D 3039–08. Standard test method for tensile properties of polymer matrix composite materials. West Conshohocken, PA: ASTM, 2008.
15.
CamanhoPPMaimıPDбvilaCG. Prediction of size effects in notched laminates using continuum damage mechanics. Compos Sci Technol2007; 67: 2715–2727.
16.
SunXSHarisATanVBC. A multi-axial fatigue model for fiber-reinforced composite laminates based on Puck's criterion. J Compos Mater2012; 46: 449–469.
17.
PanBQianKXieH. Two-dimensional digital image correlation for in-plane displacement and strain measurement: A review. Meas Sci Technol2009; 20: 062001–062001.
18.
Correlated Solutions. VIC-2D Testing Guide.
19.
Correlated Solutions. Digital image correlation: An overview of principles and software. University of South Carolina, 2009.
20.
Song K and Rose C. Continuum damage mechanics models for the analysis of progressive failure in open-hole tension laminates. In: 52nd AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference. Denver, Colorado, USA, 2011. American Institute of Aeronautics and Astronautics.
21.
SunXSTanVBCTayTE. Micromechanics-based progressive failure analysis of fibre-reinforced composites with non-iterative element-failure method. Comput Struct2011; 89: 1103–1116.
22.
RaghavaRSCaddellRMYehGSY. The macroscopic yield behavior of polymers. J Mater Sci1973; 8: 225–232.
23.
Ridha M, Wang CH, Chen BY, et al. Modelling complex progressive failure in notched composite laminates with varying sizes and stacking sequences. Compos Part A: Appl Sci Manuf 2013.
24.
Abaqus Analysis User’s Manual, Version 6.10. 2011.
25.
PinhoSTIannucciLRobinsonP. Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development. Compos Part A: Appl Sci Manuf2006; 37: 63–73.
26.
GutkinRPinhoSTRobinsonP. Micro-mechanical modelling of shear-driven fibre compressive failure and of fibre kinking for failure envelope generation in CFRP laminates. Compos Sci Technol2010; 70: 1214–1222.
27.
JumahatASoutisCJonesFR. Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading. Compos Struct2010; 92: 295–305.
28.
BenzeggaghMLKenaneM. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus. Compos Sci Technol1996; 56: 439–449.
