The effect of stress raisers in the form of a slit-like notch and an open circular hole on the tensile strength of a quasi-UD flax-fiber-reinforced composite is studied experimentally. A finite fracture mechanics approach is applied to determine the intralaminar fracture toughness of the composite and to predict the strength in the presence of stress concentration. Reasonably good agreement of the notch effect predicted using finite fracture mechanics with a coupled strength and toughness fracture criterion and test results is demonstrated.
JoshiSVDrzalLTMohantyAK. Are natural fiber composites environmentally superior to glass fiber reinforced composites?Compos A2004; 35: 371–376.
2.
PandeyJKAhnSHLeeCS. Recent advances in the application of natural fiber based composites. Macromol Mater Eng2010; 295: 975–989.
3.
DittenberDBGangaRaoHVS. Critical review of recent publications on use of natural composites in infrastructure. Compos A2012; 43: 1419–1429.
4.
KoronisGSilvaAFontulM. Green composites: A review of adequate materials for automotive applications. Compos B2013; 44: 120–127.
5.
ShahDU. Developing plant fibre composites for structural applications by optimising composite parameters: a critical review. J Mater Sci2013; 48: 6083–6107.
6.
Lilholt H and Lawther JM. Natural organic fibres. In: Kelly A, Zweben C (eds) Comprehensive composite materials. Vol. 1. Amsterdam: Elsevier Science Ltd., 2000, pp.303–325.
7.
RuysDCroskyAEvansWJ. Natural bast fibre structure. Int J Mater Prod Technol2002; 17: 2–10.
8.
SummerscalesJDissanayakeNPJVirkAS. A review of bast fibres and their composites. Part 1 – Fibres as reinforcements. Compos A2010; 41: 1329–1335.
9.
YanLChouwNJayaramanK. Flax fibre and its composites – A review. Compos B2014; 56: 296–317.
10.
ShahzadA. Hemp fiber and its composites – a review. J Compos Mater2012; 46: 973–986.
11.
ShahDUSchubelPJLicenceP. Determining the minimum, critical and maximum fibre content for twisted yarn reinforced plant fibre composites. Compos Sci Technol2012; 72: 1909–1917.
12.
GoutianosSPeijsT. The optimisation of flax fibre yarns for the development of high-performance natural fibre composites. Adv Compos Lett2003; 12: 237–234.
13.
CorollerGLefeuvreALe DuigouA. Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite. Compos A2013; 51: 62–70.
14.
Baets J, Plastria D, Ivens J, et al. Determination of the optimal flax fibre preparation for use in UD-epoxy composites. In: Proceedings of the 18th international conference on Compos Mater (ICCM 18), Jeju Island, Korea, 21–26 August 2011, 5 p.
15.
PhillipsSBaetsJLessardL. Characterization of flax/epoxy prepregs before and after cure. J Reinf Plast Compos2013; 32: 777–785.
16.
Ma H, Li Y and Luo Y. The effect of fiber twist on the mechanical properties of natural fiber reinforced composites. In: Proceedings of the 18th international conference on Compos Mater (ICCM 18), Jeju Island, Korea, 21–26 August 2011. 6 p.
17.
ShahDUSchubelPJCliffordMJ. Modelling the effect of yarn twist on the tensile strength of unidirectional plant fibre yarn composites. J Compos Mater2013; 47: 425–436.
18.
AndersonsJJoffeR. Estimation of the tensile strength of an oriented flax fiber-reinforced polymer composite. Compos A2011; 42: 1229–1235.
19.
AndersonsJJoffeRSpārniņšE. Modeling the effect of reinforcement discontinuity on the tensile strength of UD flax fiber composites. J Mater Sci2011; 46: 5104–5110.
20.
Kannan TG, Wu CM and Cheng KB. A study on the open hole tension of the unidirectional flax yarn reinforced composites. In: Proceedings of the 15th European Conference on Compos Mater (ECCM15), Venice, Italy, 24–28 June 2012. 6 p.
21.
KannanTGWuCMChengKB. Open hole flexural and Izod impact strength of unidirectional flax yarn reinforced polypropylene composites as a function of laminate lay-up. Polym Compos2013; 34: 1912–1920.
22.
KannanTGWuCMChengKB. Influence of laminate lay-up, hole size and coupling agent on the open hole tensile properties of flax yarn reinforced polypropylene laminates. Compos B2014; 57: 80–85.
LeguillonD. Strength or toughness? A criterion for crack onset at a notch. Eur J Mech A/Solid2002; 21: 61–72.
25.
HebelJBeckerW. Numerical analysis of brittle crack initiation at stress concentrations in composites. Mech Adv Mater Struct2008; 15: 410–420.
26.
HebelJDieringerRBeckerW. Modelling brittle crack formation at geometrical and material discontinuities using a finite fracture mechanics approach. Eng Fract Mech2010; 77: 3558–3572.
27.
AndersonsJTarasovsSSpārniņšE. Finite fracture mechanics analysis of crack onset at a stress concentration in a UD glass/epoxy composite in off-axis tension. Compos Sci Technol2010; 70: 1380–1385.
28.
CarpinteriACornettiPPugnoN. A finite fracture mechanics approach to structures with sharp V-notches. Eng Fract Mech2008; 75: 1736–1752.
29.
CarpinteriACornettiPSaporaA. Brittle failures at rounded V-notches: a finite fracture mechanics approach. Int J Fract2011; 172: 1–8.
30.
CarpinteriACornettiPSaporaA. A Finite Fracture Mechanics approach to the asymptotic behaviour of U-notched structures. Fatigue Fract Eng Mater Struct2012; 35: 451–457.
31.
CamanhoPPErçinGHCatalanottiG. A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates. Compos A2012; 43: 1219–1225.
HashinZRotemA. A fatigue failure criterion for fiber reinforced materials. J Compos Mater1973; 7: 443–464.
34.
WeißgraeberPBeckerW. Finite Fracture Mechanics model for mixed mode fracture in adhesive joints. Int J Solid Struct2013; 50: 2383–2394.
35.
HughesMCarpenterJHillC. Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites. J Mater Sci2007; 42: 2499–2511.
36.
CharletKJernotJ-PGominaM. Mechanical properties of flax fibers and of the derived unidirectional composites. J Compos Mater2010; 44: 2887–2896.
37.
ShahDUSchubelPJCliffordMJ. The tensile behavior of off-axis loaded plant fiber composites: an insight on the nonlinear stress–strain response. Polym Compos2012; 33: 1494–1504.
38.
ScidaDAssararMPoilâneC. Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite. Compos B2013; 48: 51–58.
39.
DanielIMIshaiO. Engineering mechanics of composite materials, New York: Oxford University Press, 1994.
40.
MadsenBLilholtH. Physical and mechanical properties of unidirectional plant fibre composites – an evaluation of the influence of porosity. Compos Sci Technol2003; 63: 1265–1272.
PatelHKRenGHoggPJ. Hemp fibre as alternative to glass fibre in sheet moulding compound Part 1 – influence of fibre content and surface treatment on mechanical properties. Plast Rubber Compos2010; 39: 268–276.
43.
TamuzsVTarasovsSVilksU. Progressive delamination and fiber bridging modeling in double cantilever beam composite specimens. Eng Fract Mech2001; 68: 513–525.
44.
ZileETamuzsV. Mode II delamination of a unidirectional carbon fiber/epoxy composite in four-point bend end-notched flexure tests. Mech Compos Mater2005; 41: 383–390.
