Ultimate strength prediction of braided textile composites using a multi-scale approach

Abstract

In this paper, the strength of braided textile composites is predicted using a multi-scale approach bridging the mesoscale and microscale regimes. Mesoscale finite element models of representative unit cells of biaxial and triaxial braided composites are developed for predicting strength. The constituent stresses of tows inside the braided unit cell are calculated using micromechanics. Correlations between mesoscale stresses and microscale constituent stresses are established by using stress amplification factors. After calculating microscale stresses, a micromechanics-based progressive damage model is employed to determine the damage statuses of braided composites. A volume-averaging homogenization method is utilized to eliminate damage localization in the matrix of tows, and a parametric study is performed to evaluate the effects of damage homogenization. Subsequently, the ultimate strength is predicted for braided composites in which the braiding angle ranges from 15° to 75°. The prediction results are compared with the experimental values, and good agreement is observed.

Keywords

Braided textile composites micromechanics progressive damage ultimate strength prediction

Get full access to this article

View all access options for this article.

References

Huang Zm . The mechanical properties of composites reinforced with woven and braided fabrics. Compos Sci Technol 2000; 60: 479–498.

Huang

Y-H

Han

. Micromechanics of Failure for Ultimate Strength Predictions of Composite Laminates. J Compos Mater 2010; 44: 2347–2361.

Kim

Ong

C-H

. Prediction of material properties of biaxial and triaxial braided textile composites. J Compos Mater 2012; 46: 2255–2270.

Miravete

Bielsa

Chiminelli

. 3D Mesomechanical analysis of three-axial braided composite materials. Compos Sci Technol 2006; 66: 2954–2964.

Xiao

Kia

Gong

X-J

. Strength prediction of a triaxially braided composite. Compos A Appl Sci Manuf 2011; 42: 1000–1006.

Quek

. Compressive response and failure of braided textile composites: Part 2—computations. Int J Non-Linear Mech 2004; 39: 649–663.

Schultz

Garnich

. Meso-scale and multicontinuum modeling of a triaxial braided textile composite. J Compos Mater 2013; 47: 303–314.

Jin

K-K

Yuanchen Huang Lee

Y-H

. Distribution of micro stresses and interfacial tractions in unidirectional composites. J Compos Mater 2008; 42: 1825–1849.

Xia

Zhang

Ellyin

. A unified periodical boundary conditions for representative volume elements of composites and applications. Int J Solids Struct 2003; 40: 1907–1921.

10.

Huang

Jin

. Effects of fiber arrangement on mechanical behavior of unidirectional composites. J Compos Mater 2008; 42: 1851–1871.

11.

Raghava

Caddell

Yeh

GSY

. The macroscopic yield behaviour of polymers. J Mater Sci 1973; 8: 225–232.

12.

Fish

. Two-scale damage modeling of brittle composites. Compos Sci Technol 2001; 61: 2215–2222.

13.

Hashimoto

Okabe

Sasayama

. Prediction of tensile strength of discontinuous carbon fiber/polypropylene composite with fiber orientation distribution. Compos A: Appl Sci Manuf 2012; 43: 1791–1799.

14.

Bazant

Pijaudier-Cabot

. Nonlocal continuum damage, localization instability and convergence. J Appl Mech 1988; 55: 287–293.

15.

Allen

. Homogenization principles and their application to continuum damage mechanics. Compos Sci Technol 2001; 61: 2223–2230.

16.

Abaqus version 6.11 Documentation, Dassault Syste`mes, 2011.

17.

Braley M. Programm. “Braid Calculator” from A&P Technology. Available at: http://www.braider.com/Resources/Braid-Calculator.aspx, 2012.

18.

Sun

Tan

VBC

Tay

. Micromechanics-based progressive failure analysis of fibre-reinforced composites with non-iterative element-failure method. Comput Struct 2011; 89: 1103–1116.