Abstract
The influence of geometry and structure of different commercial multi-walled carbon nanotubes (MWCNTs) have been analysed. MWCNTs have been characterized by transmission and high-resolution scanning electron microscopy, measurement of specific surface area by nitrogen isotherm and X-ray diffraction. The behaviour of carbon nanotube/epoxy composites has been studied by dynamic mechanical thermal analysis, differential scanning calorimetry, measurements of density and electrical conductivity. Composites manufactured at the same experimental conditions and with the same nanofiller content presented different thermal, mechanical and electrical properties. Despite using MWCNTs with similar aspect ratio, the presence of surface defects on the nanotube structure induces an important decrease in storage modulus and electrical conductivity of composites. The functionalization of MWCNTs leads to composites with lower electrical conductivity due to the breaking of sp2 carbon delocalization and also due to the insulating polymer film wrapping the nanotube. In contrast, resin reinforced with long MWCNTs present higher modulus and electrical conductivity than those filled with shorter nanotubes.
Get full access to this article
View all access options for this article.