Abstract
The current rationale for development of composite combat helmets is to either maintain performance at reduced weight or maintain weight with a significantly higher level of ballistic performance. Typically, weight reduction with maintained performance is the design approach used. In order to reduce weight with the same materials requires a reduction of material thickness. Thinner structural materials then introduce the complicating and often limiting factor of greater back face deflection. To further understand the tradeoffs of ballistic performance and efficiency, weight and back face deflection, a research project was undertaken. In this research project, a set of 17 composite materials were investigated. The digital image correlation method was used to directly measure the characteristics of the dynamic back face deflection of targets engaged by a set of threats. The analysis of this data, which includes dynamic deflection time histories, back face velocity time histories, strain time histories and spatial distributions of these quantities, allowed for assessment of candidate material performance and characterization of back face deflection. The details of this experimental program and key data results are presented in this paper.
Get full access to this article
View all access options for this article.