Influence of thickness of individual elastomer layers (first shape factor) on the response of unbonded fiber-reinforced elastomeric bearings

Abstract

The objective of this paper is to study the influence of thickness of individual elastomer layers (first shape factor) on the vertical and horizontal responses of fiber reinforced elastomeric bearings that are not bonded or mechanically fastened to their top and bottom supports. By definition, the first shape factor, S₁, is the ratio of the plan area to the perimeter stress-free area of a single elastomer layer within the bearing. Results of a comprehensive 2D-finite element study on a large group of bearings with different shape factors of 10, 15, 20, 30, and 40 suggest that the shape factor S₁ is a critical parameter in controlling both the vertical compression modulus of the bearing and the level of stress in the fiber-reinforcing layers. Furthermore, the secant horizontal stiffness and the stress demand in the bearing elastomer material are to a limited extent influenced by the parameter S₁.

Keywords

Unbonded fiber-reinforced elastomeric bearing shape factor rollover deformation

Get full access to this article

View all access options for this article.

References

Toopchi-Nezhad

Drysdale

Tait

. Parametric study on the response of stable unbonded-fiber reinforced elastomeric isolators (SU-FREIs). J Compos Mater 2009; 43(15): 1569–1587.

Toopchi-Nezhad

Tait

Drysdale

. Bonded versus unbonded strip fiber reinforced elastomeric isolators: finite element analysis. Compos Struct 2011; 93(2): 850–859.

Kelly

. Seismic isolation systems for developing countries. Earthq Spectra 2002; 18(3): 385–406.

Mordini

Strauss

. An innovative earthquake isolation system using fibre reinforced rubber bearings. Eng Struct 2008; 30(10): 2739–2751.

Toopchi-Nezhad H, Tait MJ and Drysdale RG. Stiffness analysis of fiber-reinforced rubber isolators under compressive loads: a finite element approach. In: Proceedings of the 9th US national and 10th Canadian conference on earthquake engineering, Toronto, ON, 25--29 July 2010, paper no 407.

Gerhaher

Strauss

Bergmeister

. Numerical modeling of elastomeric bearings in structural engineering. Adv Mater Sci 2011; 3(29): 51–63.

Mullins

. Softening of rubber by deformation. Rubber Chem Technol 1969; 42: 339–362.

MSC. Marc. Santa Ana, CA: MSC Software Corporation, 2010.

MSC Software Corporation. Nonlinear finite element analysis of elastomers. Technical paper. Los Angeles, CA: MSC Software Corporation, 2000.

10.

Toopchi-Nezhad

Tait

Drysdale

. Testing and modeling of square carbon fiber-reinforced elastomeric seismic isolators. Struct Contrl Health Monitor 2008; 15(6): 876–900.

11.

Toopchi-Nezhad

Tait

Drysdale

. Shake table study on an ordinary low-rise building seismically isolated with SU-FREIs (stable unbonded fiber-reinforced elastomeric isolators). Earthq Eng Struct Dyn 2009; 38(11): 1335–1357.

12.

Tsai

Kelly

. Stiffness analysis of fiber-reinforced rectangular seismic isolators. J Eng Mech 2002; 128(4): 462–470.

13.

Kelly

. Earthquake-resistant design with rubber, 2nd ed. London: Springer, 1997.

14.

Tsai

. Compression stiffness of infinite-strip bearings of laminated elastic material interleaving with flexible reinforcements. Int J Solids Struct 2004; 41: 6647–6660.

15.

Kelly JM and Konstantinidis D. Low-cost seismic isolators for housing in highly-seismic developing countries. In: 10th world conference on seismic isolation, energy dissipation and active vibrations control of structures, Istanbul, Turkey, 28--31 May, 2007, paper no 31.

16.

Zienkiewicz OC and Taylor RL. The finite element method. The basis, vol. 1, 5th ed. Oxford: Butterworth-Heinemann, A division of Reed Educational and Professional Publishing Ltd., 2000.