This study deals with the failure and reliability analysis of cross-ply [0/90]2s glass fiber reinforced epoxy composite pinned-joints. A series of ASTM tests were conducted to study the effect of pin–hole clearance (neat-fit, 50, 100, 200, and 300 µm) on the properties of glass fiber reinforced epoxy composite pinned-joints. Failure analysis was examined using load–displacement diagrams and visual and scanning electron microscope examinations of the fractured specimens. The results showed that the first-peak and ultimate strengths were, respectively, reduced by 33.1% and 15.3% with increase in the pin–hole clearance. The corresponding increase in the ultimate displacement was 10.7% and the reduction of the apparent joint stiffness 27%. Weibull function was used to analyze the scatter in the experimental results and estimate the mean and the 50% survival strengths. Safe design strengths at different reliability levels, characteristic strengths, and the lower bound strengths were estimated using time to first failure concept.
KhashabaUA. In-plane shear properties of cross-ply laminate with different off-axis angles. Compos Struct2004; 65: 167–177.
2.
SelmyAIKhashabaUASebaeyTA. An experimental study on the bolted joint connections in GFRE [0/90]2s laminates. Eng Res J, Menoufia University2009; 32: 20–45.
3.
Khasaba UA, Sebaey TA, Mahmoud FF, et al. Experimental and numerical analysis of pinned-joints composite laminates: effects of stacking sequences. J Compos Mater 2012 (accepted for publication).
4.
ParkH-J. Effects of stacking sequence and clamping force on the bearing strengths of mechanically fastened joints in composite laminates. Compos Struct2001; 53: 213–221.
5.
KellyGHallströmS. Bearing strength of carbon fibre/epoxy laminates: effects of bolt-hole clearance. Composites Part B2004; 35: 331–343.
6.
HerringtonPDSabbaghianM. Effect of radial clearance between bolt and washer on the bearing strength of composite bolted joints. J Compos Mater1992; 26: 1826–1843.
7.
KhashabaUASallamHEMAl-ShorbagyAE. Effect of washer size and tightening torque on the performance of bolted joints in composite structures. Compos Struct2006; 73: 310–317.
8.
LimTSKimBCLeeDG. Fatigue characteristics of the bolted joints for unidirectional composite laminates. Compos Struct2006; 72: 58–68.
9.
TongL. Bearing failure of composite bolts joints with nonuniform bolt-to-washer clearance. Composites Part A2000; 31: 609–615.
10.
ChishtiMWangCHThomsonRS. Experimental investigation of damage progression and strength of countersunk composite joints. Compos Struct2012; 94: 865–873.
11.
DiNicolaAJFantleSCBearing strength behaviour of clearance-fit fastener holes in toughened graphite/epoxy laminates. In: CamponeschiET (ed.). Composite materials: testing and design [ASTM STP 1206], vol. 11, Philadelphia, PA: ASTM, 1993, pp. 220–237.
12.
HyerMWKlangECCooperDE. The effects of pin elasticity, clearance, and friction on the stresses in a pin-loaded orthotropic plate. J Compos Mater1987; 21(3): 190–206.
13.
McCarthyMALawlorVPStanleyWF. Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints. Compos Sci Technol2002; 62: 1415–1431.
14.
McCarthyMAMcCarthyCTLawlorVP. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: Part I – Model development and validation. Compos Struct2005; 71: 140–158.
15.
McCarthyCTMcCarthyMA. Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: Part II – Effects of bolt-hole clearance. Compos Struct2005; 71: 159–175.
16.
McCarthyMALawlorVPStanleyWF. An experimental study of bolt–hole clearance effects in single-lap, multibolt composite joints. J Compos Mater2005; 39: 799–825.
17.
LawlorVPMcCarthyMAStanleyWF. An experimental study of bolt–hole clearance effects in double-lap, multi-bolt composite joints. Compos Struct2005; 71: 176–190.
18.
LawlorVPStanleyWFMcCarthyMA. Characterization of damage development in single-shear bolted composite joints. Plast Rubber Compos2002; 31(3): 126–133.
19.
EganBMcCarthyCTMcCarthyMA. Stress analysis of single-bolt, single-lap, countersunk composite joints with variable bolt-hole clearance. Compos Struct2012; 94: 1038–1051.
20.
SubramanianCSenthilvelanS. Joint performance of the glass fiber reinforced polypropylene leaf spring. Compos Struct2011; 93: 759–766.
21.
EsendemirÜ. An experimental study of mechanically fastened composite joints with clearance. Int J Damage Mech2011; 20: 464–480.
22.
PierronFCerisierFGrediacM. A numerical and experimental study of woven composite pin-joints. J Compos Mater2000; 34(12): 1028–1054.
23.
SenFPakdilMSaymanO. Experimental failure analysis of glass-epoxy laminated composite bolted-joints with clearance under preload. Int J Damage Mech2011; 20: 163–178.
24.
PakdilMSenFSaymanO. The effect of preload on failure response of glass-epoxy laminated composite bolted-joints with clearance. J Reinf Plast Compos2007; 26(12): 1239–1252.
IrisarriFXLaurinFCarrereN. Progressive damage and failure of mechanically fastened joints in CFRP laminates – Part I: Refined finite element modelling of single-fastener joints. Compos Struct2012; 94(8): 2269–2277.
27.
KhashabaUA. Fatigue and reliability analysis of unidirectional GFRP composites under rotating bending loads. J Compos Mater2003; 37: 317–331.
28.
AbernethyRB. The new Weibull handbook, 4th ed. North Palm Beach, FL: Abernethy.
29.
KellyG. Load transfer in hybrid (bonded/bolted) composite single-lap joints. Compos Struct2005; 69: 35–43.
30.
KhashabaUA. Notched and pin bearing strengths of GFRP composite laminates. J Compos Mater1996; 30: 2042–2055.
31.
LinHJTsaiCC. Failure analysis of bolted connections of composites with drilled and molded-in hole. Compos Struct1995; 30: 159–168.
32.
MaikumaHKubomuraK. Bearing strength damage progress for PAM-based and pitch-based carbon fiber composites. J Compos Mater1993; 27: 1739–1761.
YanYWenW-DChangF-K. Experimental study on clamping effects on the tensile strength of composite plates with a bolt-filled hole. Composites Part A1999; 30: 1215–1229.
35.
AbdallahMHAbdinEMSelmyAI. Reliability analysis of GFRP pultruded composite rods. Qual Reliab Manage1996; 13: 88–98.
36.
DirikoluMHAktasABirgorenB. Statistical analysis of fracture strength of composite materials using Weibull distribution. Turk J Eng Environ Sci2002; 26: 45–48.
