Preparation and thermal stability of poly(methyl methacrylate)/rice husk silica/triphenylphosphine nanocomposites: assessment of degradation mechanism using model-free kinetics
Restricted accessResearch articleFirst published online July, 2013
Preparation and thermal stability of poly(methyl methacrylate)/rice husk silica/triphenylphosphine nanocomposites: assessment of degradation mechanism using model-free kinetics
Nanostructured silica powder was prepared from rice husk (Oryza sativa), an outer covering of rice. Silica was characterized using Fourier transform infrared spectroscopy, X-ray diffraction and transmission electron microscopy. The silica powder thus prepared was treated with stearic acid for the surface modification. The modified silica was utilized to prepare poly(methyl methacrylate)/modified silica composite films at 1, 5 and 10 wt% loadings by solution casting method, which promises the preparation of homogeneous composites. For comparative analyses, composite films were also made using unmodified silica. Distribution of silica particles in composite film was checked using scanning electron microscopy. Thermal analysis of the samples was carried out using thermogravimetric analyzer followed by model–free multiple–heating rate kinetics. The onset degradation temperature of poly(methyl methacrylate)/silica (modified) composites is found higher than both pure poly(methyl methacrylate) and corresponding poly(methyl methacrylate)/silica (unmodified) composites. This study also reveals the effect of a phosphorus flame retardant additive, triphenylphosphine, on the thermal degradation and flammability behavior of poly(methyl methacrylate) and poly(methyl methacrylate)/silica (modified).
LengPBMd AkilHLinOH. Thermal properties of microsilica and nanosilica filled polypropylene composite with epoxy as dispersing aid. J Reinforc Plast Compos2007; 26(8): 761–770.
5.
ZhengYNingRZhengY. Study of SiO2 nanoparticles on the improved performance of epoxy and fiber composites. J Reinforc Plast Compos2005; 24(3): 223–233.
6.
ZhouJPQiuKQFuWL. The surface modification of ZnOw and its effect on the mechanical properties of filled polypropylene composites. J Compos Mater2005; 39(21): 1931–1941.
7.
AkinciA. The determining role of inorganic particles on physical and mechanical properties of reinforced polyethylene composites. J Reinforc Plast Compos2010; 29(7): 957–963.
8.
KashiwagiTMorganABAntonucciJM. Thermal and flammability properties of a silica–poly(methylmethacrylate) nanocomposite. J Appl Polym Sci2003; 89(8): 2072–2078.
9.
MohantySNayakSK. Effect of organo-modified layered silicates on the properties of poly(methyl methacrylate) nanocomposites. J Thermoplast Compos Mater2010; 23(5): 623–645.
10.
Gonzalez–BenitoJGonzalez–GaitanoG. Interfacial conformations and molecular structure of PMMA in PMMA/silica nanocomposites. Effect of high-energy ball milling. Macromolecules2008; 41(13): 4777–4785.
11.
FuaHPHongRYZhangaYJ. Preparation and properties investigation of PMMA/silica composites derived from silicic acid. Polym Adv Technol2009; 20: 84–91.
12.
ZhangF-ALeeD-KPinnavaiaTJ. PMMA–mesocellular foam silica nanocomposites prepared through batch emulsion polymerization and compression molding. Polymer2009; 50(20): 4768–4774.
13.
EtienneSBeckerCRuchD. Effects of incorporation of modified silica nanoparticles on the mechanical and thermal properties of PMMA. J Therm Anal Calorim2007; 87(1): 101–104.
14.
ZulfikarMAMohammadAWKadhumAA. Synthesis and characterization of poly(methyl methacrylate)/SiO2 hybrid membrane. Mater Sci Eng: A2007; 452–453: 422–426.
15.
WangHXuPMengS. Poly(methyl methacrylate)/silica/titania ternary nanocomposites with greatly improved thermal and ultraviolet-shielding properties. Polym Degrad Stabil2006; 91: 1455–1461.
16.
ZouDQYoshidaH. Size effect of silica nanoparticles on thermal decomposition of PMMA. J Therm Anal Calorim2010; 99: 21–26.
17.
GarciaNCorralesTGuzmanJ. Understanding the role of nanosilica particle surfaces in the thermal degradation of nanosilica–poly (methyl methacrylate) solution-blended nanocomposites: from low to high silica concentration. Polym Degrad Stabil2007; 92: 635–643.
18.
PantaleonRGonzalez–BenitoJ. Structure and thermostability of PMMA in PMMA/S nanocomposites: effect of high-energy ball milling and the amount of the nanofiller. Polym Compos2010; 31(9): 1585–1592.
19.
HuY-HChenC-YWangC-C. Viscoelastic properties and thermal degradation kinetics of silica/PMMA nanocomposites. Polym Degrad Stabil2004; 84: 545–553.
20.
BalazsACEmrickTRussellTP. Nanoparticle polymer composites: where two small worlds meet. Science2006; 314: 1107–1110.
21.
LiouTH. Preparation and characterization of nano-structured silica from rice husk. Mater Sci Eng: A2004; 364(1–2): 313–323.
RealCAlcalaDMCriadoJM. Preparation of silica from rice husks. J Am Ceram Soc1996; 79(8): 2012–2016.
24.
HornsbyPRWatsonCL. Interfacial modification of polypropylene composites filled with magnesium hydroxide. J Mater Sci1995; 30: 5347–5355.
25.
HuangHTianMYangJ. Stearic acid surface modifying Mg(OH)2: mechanism and its effect on properties of ethylene vinyl acetate/Mg(OH)2 composites. J Appl Polym Sci2008; 107: 3325–3331.
26.
LaiYHKuoMCHuangJC. On the PEEK composites reinforced by surface-modified nano-silica. Mater Sci Eng: A2007; 458: 158–169.
27.
YangFBogdanovaINelsonGL. Impact of the chemical composition of nanofillers on the flammability of polymer nanocomposites. Polym Adv Technol2008; 19: 602–608.
28.
WeiPLiHJiangP. An investigation on the flammability of halogen-free fire retardant PP–APP–EG systems. J Fire Sci2004; 22(5): 367–377.
29.
PalKRastogiJN. Development of halogen-free flame-retardant thermoplastic elastomer polymer blend. J Appl Polym Sci2004; 94: 407–415.
30.
EHC–197. Flame*retardant: a general introduction, international program on chemical safety. Geneva, Switzerland: World Health Organization, 1997.
31.
KulshreshthaAKVasileC. Handbook of polymer blends and composites2002; Vol. 2, Ohio, USA: ISmithers Rapra Publishing, pp. 189–199.
32.
AroraSBagoriaRKumarM. Effect of alpha-tocopherol (vitamin E) on the thermal degradation behaviour of edible oils. J Therm Anal Calorim2010; 102: 375–381.
33.
VyazovkinS. A unified approach to kinetic processing of nonisothermal data. Int J Chem Kinet1996; 28: 95–101.
34.
AroraSKumarMDubeyGP. Thermal decomposition kinetics of rice husk: activation energy with dynamic thermogravimetric analysis. J Energy Instit2009; 82(3): 138–143.
35.
PetersonJDVyazovkinSWightCA. Kinetic study of stabilizing effect of oxygen on thermal degradation of poly(methyl methacrylate). J Phys Chem: B1999; 103: 8087–8092.
36.
LaachachiAFerriolMCochezM. A comparison of the role of boehmite (alooh) and alumina (Al2O3) in the thermal stability and flammability of poly(methyl methacrylate). Polym Degrad Stabil2009; 94: 1373–1378.
37.
AhamdSAhmadSAgnihotrySA. Synthesis and characterization of in situ prepared poly(methyl methacrylate) nanocomposites. Bull Mater Sci2007; 30(1): 31–35.
38.
BeraOPilicBPavlicevicJ. Preparation and thermal properties of polystyrene/silica nanocomposites. Thermochim Acta2011; 515: 1–5.
39.
LomakinSMUsachevSVKoverzanovaEV. An investigation of thermal degradation of polymer flame retardant additives: triphenylphosphine and modified/intercalated trimethylphosphine. 1999. Proceedings of the 10th annual conference on recent advances in the fire retardancy of polymeric materials. Business Communication CoNorwalk, USA.
40.
FeyzEJahaniYEsfandehM. Effect of a nanoclay/triphenyl phosphate hybrid system on the fire retardancy of polycarbonate/acrylonitrile–butadiene–styrene blend. J Appl Polym Sci2011; 120: 3435–3442.
41.
FriedmanHL. Kinetics of thermal degradation of char-forming plastics from thermogravimetry. J Polym Sci: Pt C1964; 61: 183–195.
