NC2® tricot stitched carbon preform has been tested to evaluate its potential application in aircraft structures. It is one in a range of stitched fabric group, specially developed by Hexcel Composites, designed to be processed with a RTM6 monocomponent resin. This article aims to evaluate the tricot stitched fabric behavior towards resin flow front in resin transfer molding process, its mechanical performance in bending test, and its structure during C-scan non-destructive inspection. Flexural performance of the laminates and the scatter of the results corresponded well with C-scan ultrasonic maps, where resin pockets near the stitches were distinguished. The fracture area visualization, via photography and scanning electron microscopy techniques, aided to find a few flaws between the stitch yarns, which conducted to a larger scatter of the flexural rupture strength results.
SureshS. Fatigue of material2003, 2nd edn. Cambridge: Cambridge University Press.
2.
Toll S and Manson JAE. An analysis of the compressibility of fiber assemblies. In: Proceedings of the Sixth International Conference on Fiber-reinforced Composites, Newcastle-upon-Tyne, 1994, pp. 1–10.
3.
BickertonSBunyainMJSomashekarAA. The viscoelastic compression behaviour of liquid composite molding preforms. Compos Part A: Appl. Sci Manuf2003; 34: 431–444.
4.
ChenRZYeLKruckenbergT. A micromechanical compaction model for woven fabric preforms Part I: Single layer. Compos Sci Technol2006; 66: 3254–3254.
5.
DrapierSPagotAVautrinA. Influence the stitching density on the transverse permeability of non-crimped new concept (NC2) multiaxial reinforcements: measurements and predictions. Compos Sci Technol2006; 66: 1546–1546.
6.
BeierUFischerFSandlerJKW. Mechanical performance of carbon fibre-reinforced composites based on stitched preforms. Compos Part A: Appl Sci Manuf2007; 38: 1655–1663.
7.
KrattmanKKSutcliffeMPFLillehedenLT. A novel image analysis procedure for measuring fibre misaligment in unidirectional fibre composites. Compos Sci Technol2009; 69: 228–238.
8.
LekakouCEdwardsSBellG. Computer modelling for de prediction of the in-plane permeability of non-crimp stitch bonded fabrics. Compos Part A: Appl Sci Manuf2006; 37: 820–825.
9.
Koziol M. Experimental study on the effect of stitch arrangement on mechanical performance of GFRP laminates laminates manufactured on a basis of stitched performs. J Compos Mater 2011. DOI: 10.1177/0021998311414947.
10.
MouritzAPCoxBN. A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites. Compos Part A: Appl Sci Manuf2010; 41: 709–728.
11.
TriasDGarciaRCostaJ. Quality control of CFRP by means of digital image processing and statistical point pattern analysis. Compos Sci Technol2007; 67: 2438–2446.
12.
AtkinsonGShiG. Characterization of inclusions in clean steels: a review including the statistics of extremes methods. Progr Mater Sci2003; 48: 457–520.
13.
ASTM D790-03. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. West Conshohocken: ASTM, 2003.
14.
JonesRM. Mechanics of composite material, Philadelphia: Taylor & Francis Inc, 1999.
15.
BrayDEStanleyRK. Nondestructive evaluation - A tool in design, manufacturing, and service, New York: CRC Press, 1997.
16.
KaynakCAkgulEIsitmanNA. Effects of mold temperature and vacuum on the mechanical properties of epoxy/glass fiber composite plates. J Compos Mater2008; 42: 1505–1513.
17.
KaczmarekH. Lamb wave interaction with impact-induced damage in aircraft composite: Use the A0 mode excited by air-couple transducer. J Compos Mater2003; 37: 217–231.
18.
NordlundMLundiströmTSFrishfeldsV. Permeability network model for no-crimp fabrics. Compos Part A: Appl Sci Manuf2006; 37: 826–835.
19.
LoenderslootRLomovSVAkkermanR. Carbon composites based on multiaxial multiply stitched preforms. Part V: geometry of sheared biaxial fabrics. Compos Part A: Appl Sci Manuf2006; 37: 103–113.
20.
JonesRM. Mechanics of composite materials, Philadelphia: Taylor and Francis, 1999.
