Effect of accelerated environmental aging on mechanical behavior of curaua/glass hybrid composite

Abstract

This study investigates the combined effects of humidity and ultraviolet radiation on the mechanical properties of hybrid composite comprising glass-E and curaua fibers reinforcing terephthalic polyester resin. For this purpose, construction of an accelerated environmental aging chamber was carried out. Mechanical properties were evaluated using tensile and three-point bending tests, along with analysis of fracture characteristics. Mass loss analysis of the specimens was also conducted during exposure in the chamber. A composite with only glass-E fiber was also tested and used as a basis for comparison. In the original condition the hybrid composite exhibited mechanical properties similar to those of the composite containing only glass-E fiber. After aging, there was a decrease in mechanical properties. Aging was more harmful to the hybrid composite than to the glass-E fiber composite. The new hybrid composite developed is intended for engineering applications as an alternative material to glass fiber composites.

Keywords

Accelerated aging natural fiber hybrid composite curaua fiber

Get full access to this article

View all access options for this article.

References

Suddell BC, Evans WJ, Isaac DH and Crosky A. 2002. A survey into the application of natural fiber composites in the automotive industry, In: IV International Symposium on Natural Polymers and Composites Conference Proceedings, São Pedro, Brazil, pp. 455–461.

Bledzki

Gassan

. Composites reinforced with cellulose based fibers. Progr Polym Sci 1999; 24(2): 221–274.

Thwe

Liao

. Effects of environmental aging on the mechanical properties of bamboo-glass fiber reinforced polymer matrix hybrid composites. Composites: Part A 2002; 33: 43–52.

Woo

RSC

Honggang

Christopher

Leung

JKK

. Environmental degradation of epoxy-organoclay nanocomposites due to UV exposure: Part II residual mechanical properties. Compos Sci Technol 2008; 68: 2149–2155.

Mohanty

Misra

Hinrichsen

. Biofibers, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng 2000; 276/277: 1–24.

Abdullah-Al-Kafi Abedin

. Study on the mechanical properties of jute/glass fiber-reinforced unsaturated polyester hybrid composites: effect of surface modification by ultraviolet radiation. J Reinf Plast Compos 2006; 25: 575–587.

Ravi Kumar

. An evaluation of the effects of type and temperature of aqueous media on the compressive strength of glass-epoxy composites. J Reinf Plast Compos 2004; 23: 1717–1727.

Silva

Aquino

EMF

. Curaua fiber: a new alternative to polymeric composites. J Reinf Plast Compos 2008; 27: 113/1–112.

Razera IAT, Trindade WG, Leão AL, Frollini E. Jute and curaua fibers as reinforcement in phenolic and lignophenolic matrix composites, In: 4th International Symposium on Natural Polymers and Composites Conference Proceedings, Sao Pedro- SP, Brazil, pp. 507–514.

10.

Trindade WG. Preparação de compósitos de matriz fenólica e matriz lignina-fenol reforçada com fibras de curauá modificadas superficialmente, Master degree, The University of São Paulo, Chemistry Institute of São Carlos, São Carlos/SP, Brazil, 2000.

11.

ASTM G53-96. Practice for operating light- and water-exposure apparatus (fluorescent UV-condensation type) for exposure of nonmetallic materials (Withdrawn 2000). Philadelphia: ASTM, 1996.

12.

ASTM D3039M-08. Standard test methods for tensile properties of polymer matrix composites. Philadelphia: ASTM, 2008.

13.

ASTM D790-07. Standard test methods for flexural properties of unreinforced an reinforced plastics and electrical insulating materials, Designation: D790-07. Philadelphia: ASTM, 2007.

14.

ASTM D792-08. Standard test method for density and specific gravity (relative density) of plastics by displacement. Philadelphia: ASTM, 2008.

15.

ASTM D3171. Standard test methods for constituent content of composite materials. Philadelphia: ASTM, 2004.

16.

Segovia F, Ferrer C, Salvador MD and Amigó V. Influence of processing variables on mechanical characteristics of sunlight aged polyester/glass fiber composites, Polym Degrad Stabil 2001; 71: 179–184.

17.

Rabek

. Polymer photo-degradation: mechanisms and experimental methods, Chapter 2 & 10. London: Chapmen & Hall, pp. 40, 565–566.

18.

Kumar

Singh

Nakamura

. Degradation of carbon fiber-reinforced epoxy composites by ultraviolet radiation and condensation. J Compos Mater 2002; 36: 2713–2721.

19.

Scida

. The effect of ageing on the damage events and woven-fiber composite materials under different loading conditions. Compos Sci Technol 2002; 62: 551–557.