The effect of urea–formaldehyde adhesive and polymeric methylene diphenyl diisocyanates adhesive on the manufacture of particleboard using coffee waste as a raw material was investigated. The coffee waste was blended with the urea–formaldehyde or polymeric methylene diphenyl diisocyanates, then hot-pressed at 140°C at two pressure levels. The particleboards were tested to certify their density, moisture content, thickness swelling, water absorption, bending strength and modulus of elasticity. The density, moisture content and bending strength of the sample increased, but thickness swelling and water absorption decreased with increasing quantity of the urea–formaldehyde and polymeric methylene diphenyl diisocyanates. The particleboard with urea–formaldehyde and polymeric methylene diphenyl diisocyanates at the same quantity, the density, moisture content, thickness swelling, water absorption, bending strength and modulus of elasticity of polymeric methylene diphenyl diisocyanates were better than urea–formaldehyde adhesive. At the same adhesive content, the urea–formaldehyde adhesive samples above 18% urea–formaldehyde content and all of the samples with PMDI adhesive met the Thai industrial standards.
KublerH. Wood as building and hobby material. New York, Canada: Wiley and Sons Inc., 1977, pp. 256–256.
2.
KnopAScheibW. Chemistry and application of phenolic resins. New York: Springer-Verlag, 1979, pp. 269–269.
3.
Wu Q. Comparative properties of bagasse particleboard. In: International symposium on utilization of agricultural and forest residue, Nan Jing, China, October 31–November 4, 2001. pp.277–284.
4.
NacarMHizirogluSKalayciogluH. Some of the properties of particleboard panels made from Eucalyptus. Am J Appl Sci2005; (Special Issue, pp. 5–8.
5.
NemliG. Effects of some manufacturing factors on the properties of particleboard manufactured from Alder (Alnus glutinosa subsp. Barbata). Turk J Agric Forest2003; 27: 99–104.
6.
PanZCathcartAWangD. Properties of particleboard bond with rice bran and polymeric methylene diphenyl diisocyanate adhesives. Ind Crop Prod2006; 23(1): 40–45.
7.
Kelly MW. Critical literature review of relationships between processing parameters and physical properties of particleboard. Gen. Tech. Rep. FPL-10. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 1997, pp.2–50.
8.
PapadopoulosANTraboulayEAHillCAS. One layer experimental particleboard from coconut chips – (Cocos nucifera L.). Eur J Wood Wood Prod2002; 60(6): 394–396.
9.
WidyoriniRXuJUmemuraK. Manufacture and properties of binderless particleboard from bagasse I: effects of raw material type, storage methods, and manufacturing process. J Wood Sci2005; 51(6): 648–654.
10.
ShiJ-SLiJ-ZFanY-M. Preparation and properties of waste tea leaves particleboard. Forest Stud China2006; 8(1): 41–45.
11.
BekaloSReinhardtH-W. Fibers of coffee husk and hulls for the production of particleboard. Mater Struct2009; 43(8): 1049–1060.
12.
WallerJMBiggerMHillockRJ. Coffee pests, diseases and their management. Wallingford: CABI, 2007, pp. 1–17.
13.
International Coffee Organization. Total production of exporting, http://www.ico.org/prices/po.htm (2010, accessed 12 February 2010).
14.
Office of Agricultural Economics. Coffee, http://www.oae.go.th (2010, accessed 12 February 2010).
15.
CalzadaJFLeónORArriolaMC. Biogas from coffee pulp. Biotechnol Lett1981; 3(12): 713–716.
16.
CalzadaJFRolzCArriolaMDCD. Biogas production from coffee pulp juice using packed reactors: scale-up experiments. World J Microbiol Biotechnol1986; 2(4): 489–492.
17.
SilvaMANebraSAMachado SilvaMJ. The use of biomass residues in the Brazilian soluble coffee industry. Biomass Bioenergy1988; 14(5–6): 457–467.
18.
KondamudiNMohapatraSKMisraM. Spent coffee grounds as a versatile source of green energy. J Agric Food Chem2008; 56(24): 11757–11760.
19.
Thai industrial standards for flat pressed particleboards (TIS. 876-2004): medium density. Thai: Ministry of Industry Thailand, 2004.
20.
PapadopoulosANHillCASGkaraveliA. Bamboo chips (Bambusa vulgaris) as an alternative lignocellulosic raw material for particleboard manufacture. Eur J Wood Wood Prod2004; 62(1): 36–39.
21.
KalayciogluHDenizIHizirogluS. Some of the properties of particleboard made from paulownia. J Wood Sci2005; 51(4): 410–414.
22.
IskanderaniFI. Physical properties of particleboard panels manufactured from Phoenix dactylifera-L (date palm) mid-rib chips using urea formaldehyde binder. Int J Polym Mater2008; 57: 979–995.
AkarantaO. Production of particle boards from bioresources. Biores Technol2000; 75(1): 87–89.
25.
ViswanathanRGothandapaniLKailappanR. Water absorption and swelling characteristics of coir pith particle board. Biores Technol2000; 71(1): 93–94.
26.
PaulWOhlmeyerMLeithoffH. Optimising the properties of OSB by a one-step heat pre-treatment process. Eur J Wood Wood Prod2006; 64(3): 227–234.
27.
Carll CG. Review of thickness swelling in hard board siding: effect of processing variables. General Technical Report FPL–GTR–96 Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 1996.
28.
Chelak W and Newman WH. MDI high moisture content bonding mechanism, parameters, and benefits using MDI in composite wood products. In: Proceedings of 25th international particleboard/composite materials symposium, Pullman, WA, 1991, 9–11 April, pp.205–229.
29.
HawkeRSunBGaleM. Effect of fiber mat moisture content on physical properties of polyisocyanate-bonded hardboard. Forest Prod J1993; 43(1): 15–20.
30.
PapadopoulosANHillCASTraboulayE. Isocyanate resins for particleboard: PMDI vs EMDI. Eur J Wood Wood Prod2002; 60(2): 81–83.
31.
BlanchetPCloutierARiedlB. Particleboard made from hammer milled black spruce bark residues. Wood Sci Technol2000; 34(1): 11–19.
32.
XuJSugawaraRWidyoriniR. Manufacture and properties of low-density binderless particleboard from kenaf core. J Wood Sci2004; 50(1): 62–67.
33.
MalonneyT. Modern particleboard and dry-process fiberboard manufacturing. San Francisco, CA: Miller Freeman Publications, 1977.
34.
XuJWidyoriniRKawaiS. Properties of kenaf core binderless particleboard reinforced with kenaf bast fiber-woven sheets. J Wood Sci2005; 51(4): 415–420.
35.
RoffaelERauchW. Influence of density on the swelling behavior of phenolic-resin-bonded particleboards. Holzals Roh- und Werkstoff1972; 30(5): 178–181.
