Reinforced tantalum carbide particles were synthesized between tantalum wires and graphite in gray cast iron by heat treatment; the effects of different heat treatment times on the phase evolution, microstructure, and micro-hardness of the composites were investigated. The particles obtained were small and square-shaped, 1–2 µm in size, and evenly distributed through the cast iron. The maximum micro-hardness of the composite region was 1832 HV0.1. After 20 min heat treatment, the micro-hardness decreased to approximately 1077 HV0.1, between about four and five times that of the matrix. The resulting composites also presented higher wear resistance compared with unreinforced gray cast iron.
BesteUHammerströmLEngqvistHRimlingerSJacobsonS. Particle erosion of cemented carbides with low co content. Wear2001; 250: 809–817.
2.
HuthSKrasokhaNTheisenW. Development of wear and corrosion resistant cold-work tool steels produced by diffusion alloying. Wear2009; 267: 449–457.
3.
GordoEVelascoFAntonNTorralbaJM. Wear mechanisms in high speed steel reinforced with (NbC) p and (TaC) p MMCs. Wear2000; 239: 251–259.
4.
WangJWangYDingY. Reaction synthesis of Fe–(Ti,V)C composites. J Mater Process Technol2008; 197: 54–58.
5.
RazaviMYaghmaeeMSRahimipourMRTousiSR. The effect of production method on properties of Fe–TiC composite. Int J Miner Process2010; 94: 97–100.
6.
NiZSunYXueFBaiJLuY. Microstructure and properties of austenitic stainless steel reinforced with in situ TiC particulate. Mater Design2011; 32: 1462–1467.
7.
BernsHWewersB. Development of an abrasion resistant steel composite with in situ TiC particles. Wear2001; 251: 1386–1395.
8.
JiangQCZhaoFWangHYZhangZQ. In situ TiC-reinforced steel composite fabricated via self-propagating high-temperature synthesis of Ni-Ti-C system. Mater Lett2005; 59: 2043–2047.
9.
FengKYangYShenBGuoL. In situ synthesis of TiC/Fe composites by reaction casting. Mater Design2005; 26: 37–40.
10.
LiBLiuYCaoHHeLLiJ. Rapid fabrication of in situ TiC particulates reinforced Fe-based composites by spark plasma sintering. Mater Lett2009; 63: 2010–2012.
11.
BeckmannG. A theory of abrasive wear based on shear effects in metal surfaces. Wear1980; 59: 421–432.
12.
BerthodPHaminiYArandaLHéricherL. Experimental and thermodynamic study of tantalum-containing iron-based alloys reinforced by carbides: part I — case of (Fe, Cr)-based ferritic steels. Calphad2007; 31: 351–360.
13.
XiaCJinZ. Interfacial reactions in an explosively-welded tantalum clad steel plate. Surf Coat Technol2000; 130: 29–32.
14.
WangJWangYDingYGongW. Microstructure and wear-resistance of Fe–(Ti,V)C composite. Mater Design2007; 28: 2207–2209.
15.
AhmedIZakyF. Dilatometry determination of phase transformation temperatures during heating of Nb bearing low carbon steels. J Mater Process Technol2008; 204: 365–369.
16.
WuCC. Thermodynamics of metallurgical processes, Beijing: China Machine Press, 1993; 194–199. [in Chinese].
17.
BowdenFPMooreAWTaborD. The ploughing and adhesion of sliding metals. J Appl Phys1943; 14: 80–91.
