Sage Journals: Discover world-class research

Abstract

Cohesive elements have now become commonplace in many commercial finite element codes. Their use in impact and crash and other complex composite design problems requires the development of more advanced cohesive element formulations capable of predicting mixed-mode behavior during a complex loading. A cohesive zone model is developed for the simulation of delaminations in laminated composites under mixed-mode loadings, based on a coupling between the normal and tangential components of the relative displacement across an interlaminar interface. Featuring a unique characterization of degraded states, this coupling enables a simultaneous loss of loading capacity of the interface in normal and tangential directions, once the criteria on delamination growth are satisfied. Moreover, the variation of mode participation during the delamination process is effectively considered. A comparison between numerical simulations and experimental data on typical delamination tests shows the robustness and the potential of the model.

Keywords

delamination finite elements composites

Get full access to this article

View all access options for this article.

References

Cui WC and Wisnom MR A combined stress based and fracture mechanics based model for predicting delamination in composites. Composites 1993 ; 24: 467-474.

Camanho PP , Davila CG and de Moura MF Numerical simulation of mixed-mode progressive delamination in composite materials . J Compos Mater 2003; 37: 1415-1438.

Allix O. and Corigliano A. Modeling and simulation of crack propagation in mixed-modes interlaminar fracture specimens. Int J Fract 1996; 77: 111-140.

Valoroso N. and Champaney L. A damage-mechanics-based approach for modelling decohesion in adhesively bonded assemblies. Eng Fract Mech 2006; 73: 2774-2801.

Tvergaard V. and Hutchinson JW The influence of plasticity on mixed mode interface toughness. J Mech Phys Solids 1993 ; 41: 1119-1135.

Geubelle PH and Baylor JS Impact-induced delamination of composites: a 2D simulation. Composites: Part B 1998; 29: 589-602.

Chen J. , Crisfield MA , Kinloch AJ , Busso EP , Matthews FL and Qiu Y. Predicting progressive delamination of composite material specimens via interface elements. Mech Compos Mater Struct 1999; 6: 301-317.

Hogberg JL Mixed mode cohesive law. Int J Fract 2006; 141: 549-559.

Alfano G. and Crisfield MA Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues. Int J Numer Methods Eng 2001; 50: 1701-1736.

10.

Iannucci L. Delamination modelling using explicit interface elements. J Comput Struct 2006; 84: 1029-1048.

11.

Pinho ST , Iannucci L. and Robinson P. Formulation and implementation of decohesion elements in an explicit finite element code. Composites: Part A 2006; 37: 778-789.

12.

Balzani C. and Wagner W. An interface element for the simulation of delamination in unidirectional fiber-reinforced composite laminates. Eng Fract Mech 2008; 75: 2597-2615.

13.

Turon A. , Camanho PP , Costa J. and Davila CG A damage model for the simulation of delamination in advanced composites under variable-mode loading. Mech Mater 2006; 38: 1072-1089.

14.

Robinson P. and Song DQ A modified DCB specimen for Mode I testing of multidirectional laminates. J Compos Mater 1992; 26: 1554-1577.

15.

Reeder JR and Crews JH Mixed-mode bending method for delamination testing. AIAA J 1990; 28: 1270-1276.

16.

Lorriot T. h, Marion G. , Harry R. and Wargnier H. Onset of free-edge delamination in composite laminates under tensile loading . Composites: Part B 2003; 34: 459-471.

A coupled mixed-mode delamination model for laminated composites

Abstract

Keywords

Get full access to this article

References