Fatigue delamination growth of multidirectional carbon/bismaleimide composites was investigated to disclose the specific role of ply orientations. Both fatigue crack growth rate and threshold values of strain energy release rate in Mode I were studied by double cantilever beam test. For specimens with rising delamination resistance effect, the fatigue crack growth rate was found to be dependent on normalized interlaminar energy, GI/GIC, rather than GI. The experimental data also show that the fatigue threshold Gth is almost proportional to the corresponding GIC, that is Gth /GIC is constant and hardly affected by the midplane-adjacent fiber orientation. Furthermore, fractographs revealed that the rising delamination resistance is dominantly aroused by fiber bridging and intra-ply fracture.
Brunner AJ, Murphy N. and Pinter G.Development of a standardized procedure for the characterization of interlaminar delamination propagation in advanced composites under fatigue mode I loading conditions. Eng Fract Mech2009; 76(18): 2678-2689.
2.
Davies P., Blackman BRK and Brunner AJStandard test methods for delamination resistance of composite materials: current status. Appl Compos Mater1998; 5(6): 345-364.
3.
Tay TECharacterization and analysis of delamination fracture in composites, a review of developments from 1990 to 2001. Appl Mech Rev2003; 56(1): 1-23.
4.
Brunner AJ, Blackman BRK and Davies P.A status report on delamination resistance testing of polymer-matrix composites . Eng Fract Mech2008; 75(9): 2779-2794.
5.
ISO 15024.Fibre-reinforced plastic composites - determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials. Geneva, Switzerland: International Organization for Standardization, 2001.
6.
Hojo M., Tanaka M., Gustafson C., et al. Effect of stress ratio on near-threshold propagation of delamination fatigue cracks in unidirectional CFRP. Compos Sci Technol1987; 29(4): 273-292.
7.
Hojo M., Ochiai S., Gustafson C., et al. Effect of matrix resin on delamination fatigue crack growth in CFRP laminates. Eng Fract Mech1994; 49(1): 35-47.
8.
Hojo M., Matsuda S., Tanaka M., et al. Mode I delamination fatigue properties of interlayer-toughened CF/epoxy laminates. Compos Sci Technol2006 ; 66(5): 665-675.
9.
Hojo M., Nakashima K., Kusaka T., et al. Mode I fatigue delamination of Zanchor-reinforced CF/epoxy laminates . Int J Fatigue2010; 32(1): 37-45.
10.
O’Brien K.Generic aspects of delamination in fatigue of composites. AHSJ1987; 32: 13-18.
11.
Martin RH and Murri GBCharacterization of mode I and mode II delamination growth and thresholds in graphite/PEEK composites, TM 100577. Washington DC: NASA, 1988.
12.
Asp LE, Sjogren A. and Greenhalgh ESDelamination growth and thresholds in a carbon/epoxy composite under fatigue loading. J Compos Technol Res2001 ; 23(2): 55-68.
13.
Argülles A., Viña J., Canteli AF, et al. Interlaminar crack initiation and growth rate in a carbon-fibre epoxy composite under mode-I fatigue loading . Compos Sci Technol2008 ; 68(12): 2325-2331.
14.
Shivakumar KN, Chen H., Abali F., et al. A total fatigue life model for mode I delaminated composite laminates. Int J Fatigue2006; 28(1): 33-42.
15.
Choi NS, Kinloch AJ and Williams JG. Delamination fracture of multidirectional carbon-fiber/epoxy composites under mode I, mode II and mixed-mode I/II loading . J Compos Mater1999; 33(1): 73-100.
16.
de Morais AB , de Moura MF, Marques AT, et al. Mode-I interlaminar fracture of carbon/epoxy cross-ply composites. Compos Sci Technol2002 ; 62(5): 679-686.
17.
Pereira AB and de Morais ABMode I interlaminar fracture of carbon/epoxy multidirectional laminates . Compos Sci Technol2004; 64(13and14): 2261-2270.
18.
Brandt F.A new load introduction concept for improved and simplified delamination beam testing. Exp Tech1998; 22(1): 17-20.
19.
Hashemi S., Kinloch AJ and Williams JGMechanics and mechanisms of delamination in a poly(ether sulphone)- fibre composite. Compos Sci Technol1990; 37(4): 429-462.
20.
Hashemi S., Kinloch AJ and Williams JGThe effects of geometry, rate and temperature on the mode I, mode II and mixed-mode I/II interlaminar fracture of carbonfiber/poly(ether-etherketone) composites . J Compos Mater1990; 24: 918-956.
21.
Sorensen L. , Botsis J., Gmür T., et al. Bridging tractions in mode I delamination: measurements and simulations. Compos Sci Technol2008; 68(12): 2350-2358.
22.
Szekrényes A. and Uj J.Advanced beam model for fiber-bridging in unidirectional composite double-cantilever beam specimens. Eng Fract Mech2005; 72(17): 2686-2702.
23.
Tamuzs V., Tarasovs S. and Vilks U.Progressive delamination and fiber bridging modeling in double cantilever beam composite specimens. Eng Fract Mech2001 ; 68(5): 513-525.
24.
Paris P.Fatigue - an interdisciplinary approach. In: Burke JI et al. (eds) Proceedings of the Tenth Sagamore Army Materials Research Conference. New York: Syracuse University Press, 1964, pp.107-127.
25.
Wilkins DJ, Eisenmann JR, Camin RA, et al. Characterizing delamination growth in graphite-epoxy. In: Reifsnider KL (ed.) Damage in Composite Materials, ASTM STP 775. Philadelphia: American Society for Testing and Materials, 1982, pp.168-183.
26.
Singh S. and Greenhalgh E.Mixed-mode delamination growth in carbon-fiber composites under fatigue loading . Report DRA/SMC/CR961052/1.0 Defence Research Agency , 1996.
27.
Blanco N., Gamstedt EK, Asp LE, et al. Mixed-mode delamination growth in carbon-fibre composite laminates under cyclic loading. Int J Solids Struct2004; 41(15): 4219-4235.
28.
Kardonmateas GA, Pelegri AA and Malik B.Growth of internal delaminations under cyclic compression in composite plates. J Mech Phys Solids1995; 43(6): 847-868.
29.
Ramdumar RL and Whitcomb JDCharacterization of mode I and mixed-mode delamination growth in T300/5208 graphite/epoxy. In: Johnson WS (ed.) Delamination and debonding of materials ASTM STP 876. Philadelphia: American Society for Testing and Materials , 1985, pp.315-335.
30.
ASTM D6115-97.Standard test method for mode I fatigue delamination growth onset of unidirectional fiber-reinforced polymer matrix composites. Philadelphia: ASTM International, 2004.
31.
Laksimi A., Ahmed Benyahia A., Benzeggagh ML, et al. Initiation and bifurcation mechanisms of cracks in multidirectional laminates. Compos Sci Technol2000; 60(4): 597-604.
