As a deviation from the linear fracture criterion for mixed-mode delamination, the original Benzeggagh-Kenane (B-K) fracture criterion with a single parameter can be derived via the assumption on a common mixed-mode resistance to delamination. Through the extension to the framework of separate mixed-mode fracture toughness, a more consistent fracture criterion with two parameters is obtained. Moreover, a theoretical extension to a 3D fracture criterion is also possible. The quality of the modified fracture criterion in the description of fracture locus is investigated by numerical validations against experimental data and comparisons with other fracture criteria.
Davidson, B.D. and Zhao, W. (2007). An Accurate Mixed-mode Delamination Failure Criterion for Laminated Fibrous Composites Requiring Limited Experimental Input, Journal of Composite Materials , 41(6): 679-702.
2.
Reeder, J.R. ( 1992). An Evaluation of Mixed-mode Delamination Failure Criteria , Technical Report: NASA/TM-1992-104210, NASA Langley Technical Report Server.
3.
Reeder, J.R. ( 2006). 3D Mixed Mode Delamination Fracture Criteria - An Experimentalist’s Perspective, In: Proceedings of American Society for Composites, 21st Annual Technical Conference, Dearborn, MI, US, 17-20 September, p. 19.
4.
Kim, B.W. and Mayer, A.H. (2003). Influence of Fiber Direction and Mixed-mode Ratio on Delamination Fracture Toughness of Carbon-Epoxy Laminates, Composites Science and Technology , 63: 695-713.
5.
ASTM D6671-01 (2001). Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites, ASTM International , West Conshohocken, PA, USA.
6.
Benzeggagh, M.L. and Kenane, M. (1996). Measurement of Mixed-mode Delamination Fracture Toughness of Unidirectional Glass-Epoxy Composites with Mixed-mode Bending Apparatus, Composites Science and Technology , 56: 439-449.
7.
Hahn, H.T. ( 1983). A Mixed-mode Fracture Criterion for Composite Materials , Composites Technology Review, 5: 26-29.
8.
White, S.R. ( 1987). Mixed-mode Interlaminar Fracture of Graphite-Epoxy Composites , Master Thesis, Washington University.
9.
Whitcomb, J.D. ( 1984). Analysis of Instability-related Growth of a Through-width Delamination, NASA/TM-86301, Langley Research Center, Hampton, VA, USA.
10.
Williams, J.G. (1989). The Fracture Mechanics of Delamination Tests, Journal of Strain Analysis, 24(4): 207-214.
11.
Hashemi, S. , Kinloch, A.J. and Williams, J.G. (1991). Mixed-mode Fracture in Fiber-Polymer Composite Laminates, In: O’Brien, T.K. (ed.), Composite Materials: Fatigue and Fracture, Vol. 3, ASTM STP1110, pp. 143-168, American Society for Testing and Materials, Philadelphia, PA .
12.
Agastra, P. ( 2004). Mixed-mode Delamination of Glass Fiber-Polymer Matrix Composite Material, Master Thesis, Montana State University .
13.
Camanho, P.P. , Davila, C.G. and De Moura, M.F. (2003). Numerical Simulation of Mixed-mode Progressive Delamination in Composite Materials , Journal of Composite Materials, 37(16): 1415-1438.
