This article presents the use of fibers residue from textile industry to minimize environmental problems associated with material accumulation. Composite materials utilizing textile fiber residues and high density polyethylene were prepared. Effect of treatment with hot water on fibers to prepare composites was studied to provide an improvement in mechanical properties of these materials. This treatment on fibers was evaluated by X-ray diffraction and scanning electron microscopy techniques. Experimental results of mechanical properties indicated higher mechanical strength for treated fiber composites compared to the untreated fiber composites.
Habibi Y., El-Zawawy WK, Ibrahim MM and Dufresne A.Processing and characterization of reinforcement polyethylene composites made with lignocellulosic fibers from Egyptian agroindustrial residues. Compos Sci and Technol2008; 68(7-8): 1877-1885.
2.
Luz SM, Del Tio J., Rocha GJR, Gonçalves AR and Del’Arco APCellulose and cellulignin from sugarcane bagasse reinforced polypropylene composites: effect of acetylation on mechanical and thermal properties. Composites Part A2008; 39(9): 1362-1369.
3.
Zampaloni M. , Pourboghrat F., Yankovich SA, et al. Kenaf natural fiber reinforced polypropylene composites: a discussion on manufacturing problems and solution. Composites Part A2007; 38(8): 1569-1580.
4.
Facca AG, Kortschot MT and Yan N.Predicting the tensile strength of natural fibre reinforced thermoplastics . Compos Sci and Technol2007; 67(11-12): 454-466.
5.
Saheb DN and Jog JPNatural fiber polymer composites: a review. Adv Polym Technol1999; 18(4): 351-363.
6.
Satyanarayana KG, Guimarães JL and Wypych F.Studies on lignocellulosic fibers of Brazil. Part I: Source, production, morphology, properties and applications . Composites Part A2007; 38(7): 1694-1709.
7.
Panthapulakkal S. and Sain M.Agro-residue reinforced high-density polyethylene composites: fibre characterization and analysis of composite properties. Composites Part A2007; 38(6): 1445-1454.
8.
Lei Y., Wu Q., Yao F. and Xu Y.Preparation and properties of recycled HDPE/natural fibre composites . Composites Part A2007; 38(7): 1664-1674.
9.
Zah R., Hischier R., Leão AL and Braun I.Curauá fibers in the automobile industry - a sustainability assessment . J Clean Prod2007; 15(11-12): 1032-1040.
10.
Farag MMQuantitative methods of materials substitute: application to automotive components . Mater Des2008; 29(2): 374-380.
11.
Zheng Y., Cao D. and Wang D.Study on the interface modification of bagasse fibre and the mechanical properties of its composite with PVC. Composites Part A2007; 38(1): 20-25.
12.
Wambua P., Vangrimde B., Lomov S. and Verpoest I.The response of natural fibre composite to ballistic impact by fragment simulating projectiles. Compos Struct2007 ; 77(2): 232-240.
13.
Li Y., Mai Y. and Ye L. Sisalfibre and its composites: a review of recent developments. Compos Sci Technol2000; 60(11): 2037-2055.
14.
Wielage B., Lampke T., Utschick H. and Soergel F.Processing of natural-fiber reinforced polymers and the resulting dynamic-mechanical properties. J Mater Process Technol2003; 139(1-3): 140-146.
15.
Saleem Z., Rennebaum H., Pudel F. and Grimm E.Treating bast fibres with pectinase improves mechanical characteristics of reinforced thermoplastics composites. Compos Sci Technol2008; 68(2): 471-476.
16.
Vilay V., Mariatti M., Mat T. and Todo M.Effect of fiber surface treatment and fiber loading on the properties of bagasse fiber-reinforced unsaturated polyester composites. Compos Sci Technol2008; 68(3-4): 631-638.
17.
Ma X., Yu J. and Kennedy JFStudies on the properties of natural fibers-reinforced thermoplastic starch composites. Carbohydr Polym2005; 62(1): 19-24.
18.
Edeerozey AMM , Akil HM, Azhar AB and Ariffin MIZ.Chemical modification of kenaf fibers. Mater Lett2007; 61(10): 2023-2025.
19.
Li Y., Hu C. and Yu Y.Interfacial studies of sisal fiber reinforced high density polyethylene (HDPE) composites. Composites Part A2008; 39(4): 570-578.
20.
Corrales F. , Vilaseca F., Llop M., Giron‘es J, M'endez JA and Mutj‘e P. Chemical modification of jute fibers for the production of green-composites . J Hazard Mater2007 ; 144(3): 730-735.
21.
Acha B., Reboredo MM and Marcovich NECreep and dynamic mechanical behavior of PP-jute composites: effect of the interfacial adhesion. Composites Part A2007 ; 38(6): 1507-1516.
22.
Mulinari DR , Voorwald HJC, Cioffi MOH, Silva Mlcp, Cruz TG and Saron C.Sugarcane bagasse cellulose/ HDPE obtained composites by extrusion. Compos Sci Technol2009; 69(2): 214-219.
23.
Gomes A., Matsuo T., Goda K. and Ohgi J.Development and effect of alkali treatment on tensile properties of curaua fiber green composites. Composites Part A2007; 38(8): 1811-1820.
24.
Tserki V., Zafeiropoulos NE, Simon F. and Panayiotou C.A study of the effect of acetylation and propionylation surface treatments on natural fibres. Composites Part A2005; 36(8): 1110-1118.
25.
Keener TJ, Stuart RK and Brown TKMaleated coupling agents for natural fibre composites. Composites Part A2004; 35(3): 357-362.
26.
Santiago BH and Selvam PVP.Tratamento superficial da fibra do coco: estudo de caso baseado numa alternativa econômica para fabricaçao de materiais compósitos. Revista Analytica2006; 26: 42-45.
27.
Rodrigues FG , Assunçao RMN, Vieira JG, et al. Characterization of methylcellulose produced from sugar cane bagasse: crystallinity and thermal properties. Polym Degrad and Stabil2007 ; 92(2): 205-210.
