Single-walled carbon nanotube (SWCNT) reinforced titanium (Ti) matrix composites were produced by powder metallurgy (PM) and induction heating methods. It was found that nickel coating and a fast processing time associated with the induction heating method enabled nanotubes to survive the high-temperature (above 1950 K) processing conditions. The nanotubes were first covered with a nickel coating via the electroless plating method and then dispersed in the powder by ball milling. The powder was then cold pressed to make a PM preform which was melted by induction heating in an argon environment. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations as well as Raman and X-ray Photoelectron Spectroscopy verification indicate that the nanotubes survived the high-temperature melting. Testing demonstrated that the hardness of the composites, which is directly related to strength, is improved with increasing weight percent of SWCNTs.
Iijima, S. ( 1993). Single-shell Carbon Nanotubes of 1-nm Diameter, Nature, 363: 603-605.
2.
Dresselhaus, M.S., Dresselhaus, G. and Avouris, P. ( 2001). Topics in Applied Physics: Carbon Nanotubes: Synthesis, Structure, Properties, and Applications, Vol. 80, Springer , Berlin.
3.
Treacy, M.M. , Ebbesen, T.W. and Gibson, J.M. (1996). Exceptionally High Young’s Modulus Observed for Individual Carbon Nanotubes, Nature, 381: 678-681.
4.
Yakobson, B.I. , Barbec, C.J. and Bernholc, J. (1996). Nanomechanics of Carbon Tubes: Instabilities beyond Linear Responses, Physical Review Letters, 76: 2511-2514.
5.
Zhu, J., Kim, J.D., Peng, H., Margrave, J.L., Khabashesku, V.N. and Barrera, E.V. ( 2003). Improving the Dispersion and Integration of Single-Walled Carbon Nanotubes in Epoxy Composites through Functionalization, Nano Letters, 3(8): 1107-1113.
6.
Lozano, K., Yang, S. and Zeng, Q. ( 2004). Rheological Analysis of Vapor-grown Carbon Nanofiber-reinforced Polyethylene Composites, Journal of Applied Polymer Science , 93(1): 155-162.
7.
Zhong, R., Cong, H. and Hou, P. ( 2003). Fabrication of Nano-Al based Composites Reinforced by Single-walled Carbon Nanotubes, Carbon, 41(4): 848-851.
8.
Ajayan, P.M., Schadle, L.S., Giannaris, C. and Rubio, A. ( 2000). Single-Walled Carbon Nanotube-Polymer Composites: Strength and Weakness, Advanced Materials, 12(10): 750-753.
9.
Chen, X., Xia, J., Peng, J., Li, W. and Xie, S. ( 2000). Carbon-nanotube Metal-Matrix Composites Prepared by Electroless Plating, Composites Science and Technology, 60(2): 301-306.
10.
Zeng, Q., Bayazitoglu, Y., Zhu, J., Wilson, K., Ashraf Imam, M. and Barrera, E.V. ( 2005). Coating of SWNTs with Nickel by Electroless Plating Method , Materials Science Forum, 475-9: 1013-1018.
11.
Ang, L.M. , Hor, T.S., Xu, G.Q., Tung, C.H., Zhao, S.P. and Wang, J.L.S. (2000). Decoration of Activated Carbon Nanotubes with Copper and Nickel, Carbon, 38(3): 363-372.
12.
Kong, F.Z., Zhang, Z.B., Xiong, W.Q., Liu, F., Huang, W.L., Sun, Y.L., Tu, J.P. and Chen, X.W. ( 2002). Continuous Ni-layer on Multiwall Carbon Nanotubes by an Electroless Plating Method, Surface and Coatings Technology , 155(1): 33-36.
13.
Kuzumaki, T., Miyazawa, K., Ichinose, H. and Ito, K. ( 1998). Processing of Carbon Nanotube Reinforced Aluminum Composite , Journal of Materials Research, 13(9): 2445-2449.
14.
Shurong, D. and Xiaobin, Z. (1999). Mechanical Properties of Cu-based Composites Reinforced by Carbon Nanotubes, Transactions of Nonferrous Metals Society of China, 9(3): 457-460.
15.
Feng, Y., Yuan, H.L. and Zhang, M. ( 2005). Fabrication and Properties of Silver-matrix Composites Reinforced by Carbon Nanotubes, Materials Characterization , 55(3): 211-218.
16.
George, R., Kashyap, K.T., Rahul, R. and Yamdagni, R.S. ( 2005). Strengthening in Carbon Nanotube/Aluminium (CNT/Al) Composites , Scripta Materialia, 53(10): 1159-1163.
17.
Taubenblat, P.W. (1980). Copper Base Powder Metallurgy , pp. 123-217, Metal Powder Industries Federation (MPIF), New York, USA.
18.
Schwarzkopf, P. (1947). Powder Metallurgy its Physics and Production, pp. 47-238, Macmillan Co., New York.
19.
Lenel, F. ( 1980). Powder Metallurgy Principles and Applications, pp. 99-281, Metal Powder Industries Federation (MPIF), New York.
20.
Okress, E. ( 1952). Electromagnetic Levitation of Solid and Molten Metals , Journal of Applied Physics, 23(5): 545-552.
21.
Bayazitoglu, Y. and Shampine, R. (1996). Longitudinal Electromagnetic Levitation, Journal of Materials Processing and Manufacturing Science, 5(1): 79-86.
22.
Sathuvalli, U. and Bayazitoglu , Y. (1996). The Lorentz Forces on an Electrically Conducting Sphere in an Alternating Magnetic Field, IEEE Transactions on Magnetics, 32(3): 386-399.
23.
Mestel, A.J. (1982). Magnetic Levitation of Liquid Metals, Journal of Fluid Mechanics, 117(1): 27-43.
24.
Moffatt, H.K. (1991). Electromagnetic Stirring , Physics of Fluids A, 3(5): 1336-1343.
25.
Barrera, E.V. , Sims, J., Callahan, D.L., Provenzano, V., Milliken, J. and Holtz, R.L. (1994). Processing of Fullerene-reinforced Composites, Journal of Materials Research, 9(10): 2662-2669.
26.
Barrera, E.V. , Sims, J. and Callahan, D.L. (1995). Development of Fullerene-reinforced Aluminum, Journal of Materials Research, 10(2): 366-371.
27.
Wilson, K., Zeng, Q., Bayazitoglu, Y. and Barrera, E.V. ( 2005). Electromagnetic Containerless Processing of Single-Walled Nanotube Reinforced Metal Matrix Composites, Nanotech2005, 2: 90-93.
28.
Wilson, K.Zeng, Q., Bayazitoglu, Y. and Barrera, E.V. ( 2006). The Role of Nanotubes in Melt-Processed, Single-walled Nanotube Reinforced Titanium Metal Matrix Composites. In: SAMPE Dallas, Dallas.
29.
Chastain, J. and King, R.C. (eds) (1995). Handbook of X-Ray Photoelectron Spectroscopy, pp. 40-41, Physical Electronics, Inc., Minnesota, USA.
30.
Raravikar, N., Keblinski, P., Rao, A., Dresselhaus, M., Schadler, L. and Ajayan, P. (2002). Temperature Dependence of Radial Breathing Mode Raman Frequency of Single-walled Carbon Nanotubes , Physical Review B, 66: 235424-1-235424-4.
31.
Froes, F.H. and Smugeresky, J.E. (eds) (1980). Powder Metallurgy of Titanium Alloys, TSM-AIME, Warrendale, Pennsylvania, USA.
32.
Salem, A., Kalidindi, S.R. and Doherty, R.D. ( 2002). Strain Hardening Regimes and Microstructure Evolution During Large Strain Compression of High Purity Titanium, Scripta Materialia, 46(6): 419-423.
33.
Mercer, C. and Soboyejo, W.O. ( 1996). Hall-petch Relationships in Gamma Titanium Aluminides , Scripta Materialia, 35(1): 17-22.
34.
Jung, J.Y. and Park, J.K. ( 1996). Influence of Microstructure on the Mechanical Properties of Heat-treated Cast Lamellar Structure, Scripta Materialia , 34(10): 1581-1587.
35.
Louchet, F., Weiss, J. and Richeton, T. ( 2006). Hall-Petch Law Revisited in Terms of Collective Dislocation Dynamics, Physical Review Letters, 97: 075504.
36.
Friedman, L.H. and Chrzan, D.C. (1998). Scaling Theory of the Hall-Petch Relation for Multilayers, Physical Review Letters , 81(13): 2715-2719.
37.
Koch, C. ( 1999). Bulk Behavior of Nanostructured Materials. In: Siegel, R.W., Hu, E. and Roco, M.C. (eds), Nanostructure Science and Technology - A Worldwide Study, Ch. 6, WTEC, Loyola College in Maryland. Available at: http://itri.loyola.edu/nano/final/ (accessed March 4, 2010).
38.
Shulson, E. , Weihs, T.P., Backer, I., Frost, H.J. and Horton, J.A. (1986). Grain Boundary Accommodation of Slip in Ni3Al Containing Boron, Acta Metallurgica, 34(7): 1395-1399.
39.
Shulson, E. , Weihs, T.P., Viens, D.V. and Baker, I. (1985). The Effect of Grain Size on the Yield Strength of Ni3Al, Acta Metallurgica, 33(9): 1587-1591.
40.
Jang, D. and Atzmon, M. ( 2003). Grain-size Dependence of Plastic Deformation in Nanocrystalline Fe, Journal of Applied Physics, 93(11): 9282-9286.
41.
Mintz, B. ( 2000). Role of Silicon in Influencing Strength and Impact Behaviour of Ferrite and its Likely Influence at Ultrafine Grain Size, Materials Science and Technology, 16(11): 1282-1286.
42.
Farhat, Z., Ding, Y., Northwood, D. and Alpas, A. ( 1996). Effect of Grain Size on Friction and Wear of Nanocrystalline Aluminum, Materials Science and Engineering A, 206(2): 302-313.
