Mechanical Properties of Composite Materials Made of 3D Stitched Woven-knitted Preforms

Abstract

This article presents an experimental investigation carried out to understand the mechanical behavior of composite materials made of 3D stitched woven-knitted basalt fabrics. The innovative preforms used consist of two outer layers of a plain woven fabric combined with two inner layers of weft-knitted fabrics. The weft-knitted fabrics selected for the study were varied plain knit, 1 × 1 rib, Milano, and interlock. The fabric layers were stitched together with Kevlar yarns. These 3D stitched preforms were impregnated with polyester resin using resin transfer molding, and the corresponding composites obtained were tested under tensile, bending, and impact loads. The results obtained show that the type of knitted structure significantly influences the mechanical performance of the 3D stitched woven-knitted composites. The composite using interlock structure as the inner layers has the best results concerning energy absorption and tensile strength. The varied plain knit structure has proved to be the best suited to impart stiffness as it provides the highest Young’s modulus among the above four knitted structures.

Keywords

3D stitched woven-knitted preforms mechanical properties impact behavior textile composites stress/strain curves.

Get full access to this article

View all access options for this article.

References

Ko, F.K. ( 1989). Three-dimensional Fabrics for Composites, In: Chou, T.W. and Frank, K.K. (eds), Textile Structural Composites, pp. 129-171, Elsevier Science Publishers, Amsterdam, Oxford, New York, Tokyo.

Mouritz, A.P. , Bannisterb, M.K. , Falzonb, P.J. and Leongb, K.H. (1999). Review of Applications for Advanced Three-dimensional Fibre Textile Composites, Composites Part A: Applied Science and Manufacturing, 30(12): 1445-1461.

Weimer, C. and Mitschang, P. ( 2001). Aspects of Stitch Formation Process on the Quality of Sewn Multi-textile-preforms, Composites Part A: Applied Science and Manufacturing, 32(10): 1477-1484.

Beier, U. , Fischer, F. , Sandler, J.K.W. , Altstdt, V. , Weimer, C. and Buchs, W. ( 2007). Mechanical Performance of Carbon Fibre-reinforced Composites Based on Stitched Preforms, Composites Part A: Applied Science and Manufacturing, 38: 1655-1663.

Mouritz, A.P. , Leong, K.H. and Herszberg , I. (1997). A Review of the Effect of Stitching on the In-plane Mechanical Properties of Fibre-reinforced Polymer Composites, Composites Part A: Applied Science and Manufacturing, 28(12): 979-991.

Kang, T.J. and Lee, S.H. ( 1994). Effect of Stitching on the Mechanical and Impact Properties of Woven Laminate Composite, Journal of Composite Materials , 28(16): 1574-1587.

Nie, J.J. , Xu, Y.D. , Zhang, L.T. , Yin, X.W. , Cheng, L.F. and Ma, J.Q. (2008). Effect of Stitch Spacing on Mechanical Properties of Carbon/Silicon Carbide Composites, Composites Science and Technology, 68: 2425-2432.

Yoshimura, A. , Nakao, T. , Yashiro, S. and Takeda, N. (2008). Improvement on Out-of-Plane Impact Resistance of CFRP Laminates due to Through-the-Thickness Stitching , Composites Part A: Applied Science and Manufacturing, 39: 1370-1379.

Lee, G.W. , Choi, J.S. , Lee, S.S. , Park, M. , Kim, J.Y. , Choe, C.R. and Lim, S.H. (2003). Mechanical Properties and Failure Mechanism of the Polymer Composite with 3-Dimensionally Stitched Woven Fabric, Macromolecular Research, 11(2): 98-103.

10.

Colin de Verdiere, M. , Pickett, A.K. , Skordos, A.A. and Witzel, V. (2009). Evaluation of the Mechanical and Damage Behavior of Tufted Non Crimped Fabric Composites Using Full Field Measurements, Composites Science and Technology, 69: 131-138.

11.

Koissiny, V. , Kustermans, J. , Lomov, S.V. , Verpoest, I. , Van Den Broucke , B. and Witzelx, V. (2009). Structurally Stitched NCF Preforms: Quasi-static Response, Composites Science and Technology, 69: 2701-2710.

12.

Sun, B.Z. , Hu, D.G. and Gu, B.H. (2009). Transverse Impact Damage and Energy Absorption of 3D Multi-structured Knitted Composite, Composites Part B: Engineering, 40: 572-583.

13.

Zhang, J.W. , Hu, H. , Sun, B.Z. and Gu, B.H. (2009). Dynamic Responses of 3D Multi-structured Knitted Composite T-Beam Under Transverse Impact, Journal of Composite Materials, doi: 10.1177/002/998309345238.