The steady state creep behavior in an isotropic functionally graded composite cylinder, subjected to internal pressure has been investigated. The cylinder is assumed to be made of composite containing silicon carbide particles in a matrix of pure aluminum. The creep behavior of the material has been described by threshold stress based creep law with a stress exponent of five. The effect of imposing linear particle gradient on the distribution of stress and strain rates in the composite cylinder has been investigated. The study reveals that for the assumed linear particle distribution, the radial stress decreases throughout the cylinder with increase in particle gradient, whereas the tangential, axial, and effective stresses increase significantly near the inner radius but show significant decrease toward the outer radius. The strain rates in the composite cylinder could be reduced significantly by employing gradient in the distribution of reinforcement while keeping the same average amount of reinforcement.
Arya, V.K. and Bhatnagar, N.S. ( 1976). Creep of Thick Walled Orthotropic Cylinders Subjected to Combined Internal and External Pressures, Journal of Mechanical Engineering Science, 18(1): 1-5.
2.
Bhatnagar, N.S. , Arya, V.K. and Debnath, K.K. (1980). Creep Analysis of Orthotropic Rotating Cylinder, ASME Journal of Pressure Vessel Technology , 102: 371-377.
3.
Becht, IV, C. IV and Chen, Y. ( 2000). Span Limits for Elevated Temperature Piping, ASME Journal of Pressure Vessel Technology, 122(2): 121-124.
4.
Gupta, S.K. and Pathak, S. ( 2001). Thermo Creep Transition in a Thick Walled Circular Cylinder Under Internal Pressure, Indian Journal of Pure and Applied Mathematics, 32(2): 237-253.
5.
Perry, J. and Aboudi, J. ( 2003). Elasto-plastic Stresses in Thick Walled Cylinders , ASME Journal of Pressure Vessel Technology, 125(3): 248-252.
6.
Tachibana, Y. and Iyoku, T. (2004). Structural Design of High Temperature Metallic Components, Nuclear Engineering and Design, 233(1-3): 261-272.
7.
Hagihara, S. and Miyazaki, N. (2008). Finite Element Analysis for Creep Failure of Coolant Pipe in Light Water Reactor due to Local Heating under Severe Accident Condition, Nuclear Engineering and Design , 238(1): 33-40.
8.
Weir, C.D. ( 1957). The Creep of Thick-walled Tube under Internal Pressure , Journal of Applied Mechanics, 24: 464-466.
9.
King, R.H. and Mackie, W.W. ( 1967). Creep of Thick-walled Cylinders, ASME Journal of Basic Engineering, 89(4): 877-884.
10.
Pai, D.H. (1967). Steady State Creep Analysis of Thick Walled Orthotropic Cylinders, International Journal of Mechanical Sciences, 9(6): 335-348.
11.
Bhatnagar, N.S. and Gupta, S.K. (1969). Analysis of Thick-walled Orthotropic Cylinder in the Theory of Creep, Journal of Physical Society of Japan, 27(6): 1655-1662.
12.
Gupta, S.K. and Dharmani, P.L. (1981). Creep Transition in Rotating Cylinders, Journal of Mathematical and Physical Sciences , 15(6): 525-536.
13.
Bhatnagar, N.S., Kulkarni, P.S. and Arya, V.K. (1986a). Creep Analysis of Orthotropic Rotating Cylinder Considering Finite Strains , International Journal of Non-Linear Mechanics, 1: 61-71.
14.
Bhatnagar, N.S., Kulkarni, P.S. and Arya, V.K. (1986b). Analysis of an Orthotropic Thick-walled Cylinder under Primary Creep Conditions , International Journal of Pressure Vessels and Piping Technology , 23(3): 165-185.
15.
Nieh, T.G. ( 1984). Creep Rupture of a Silicon Carbide Reinforced Aluminium Composite, Metallurgical and Material Transactions , 15A(1): 139-146.
16.
Roy, A.K. and Tsai, S.W. (1988). Design of Thick Composite Cylinders, ASME Journal of Pressure Vessel Technology, 110(3): 255-261.
17.
Fukui, Y., Yamanaka, N. and Wakashima, K. ( 1993). The Stresses and Strains in a Thick-walled Tube for Functionally Graded Material under Uniform Thermal Loading, JSME International Journal, 36A(2): 156-162.
18.
Salzar, R.S. , Pindera, M.J. and Barton, F.W. (1996). Elastoplastic Analysis of Layered Metal Matrix Composite Cylinders-Part 1: Theory, ASME Journal of Pressure Vessel Technology, 118(1): 13-20.
19.
Gupta, V.K. , Singh, S.B., Chandrawat, H.N. and Ray, S. ( 2004). Creep Behavior of a Rotating Functionally Graded Composite Disc Operating under Thermal Gradients, Metallurgical and Material Transactions, 35A(4): 1381-1391.
20.
Noda, N., Nakai, S. and Tsuji, T. ( 1998). Thermal Stresses in Functionally Graded Materials of Particle-reinforced Composite, JSME International Journal , 41A(2): 178-184.
21.
Fukui, Y. and Yamanaka, N. ( 1992). Elastic Analysis for Thick-walled Tubes of Functionally Graded Material Subjected to Internal Pressure, JSME International Journal, 351(4): 379-385.
22.
Chen, J.J., Tu, S.T., Xuan, F.Z. and Wang, Z.D. ( 2007). Creep Analysis for a Functionally Graded Cylinder Subjected to Internal and External Pressure, The Journal of Strain Analysis for Engineering Design, 42(2): 69-77.
23.
You, L.H. , Ou, H. and Zheng, Z.Y. (2007). Creep Deformations and Stresses in Thick-walled Cylindrical Vessels of Functionally Graded Materials Subjected to Internal Pressure, Composite Structures, 78: 285-291.
24.
Abrinia, K. , Naee, H., Sadeghi, F. and Djavanroodi , F. ( 2008). New Analysis for the FGM Thick Cylinders under Combined Pressure and Temperature Loading, American Journal of Applied Science, 5(7): 852-859.
25.
Tjong, S.C. and Ma, Z.Y. ( 2000). Microstructural and Mechanical Characteristics of In Situ Metal Matrix Composites, Materials Science and Engineering , R29(3-4): 49-113.
26.
Ma, Z.Y. and Tjong, S.C. (2001). Creep Deformation Characteristics of Discontinuously Reinforced Aluminium-matrix Composites , Composites Science and Technology, 61(5): 771-786.
27.
Mishra, R.S. and Pandey, A.B. (1990). Some Observations on the High-temperature Creep Behavior of 6061 Al-SiC Composites, Metallurgical and Material Transactions, 21A(7): 2089-2090.
28.
Pandey, A.B. , Mishra, R.S. and Mahajan, Y.R. (1992). Steady State Creep Behavior of Silicon Carbide Particulate Reinforced Aluminium Composites, Acta Metallurgica et Materialia, 40(8): 2045-2052.
29.
Pandey, A.B. , Mishra, R.S. and Mahajan, Y.R. (1994). High-temperature Creep of Al-TiB2 Particulate Composites, Material Science and Engineering , A189(1-2): 95-104.
30.
Gonzalez-Doncel, G. and Sherby, O.D. (1993). High-temperature Creep Behavior of Metal Matrix Aluminium-SiC Composites, Acta Metallurgica et Materialia, 41(10): 2797-2805.
31.
Park, K.T., Lavernia, E.J. and Mohamed, F.A. ( 1990). High-temperature Creep of Silicon Carbide Particulate Reinforced Aluminum, Acta Metallurgica et Materialia, 38(11): 2149-2159.
32.
Mohamed, F.A. , Park, K.T. and Lavernia, E.J. (1992). Creep Behavior of Discontinuous SiC-Al Composites, Material Science and Engineering, A150(1): 21-35.
33.
Park, K.T. and Mohamed, F.A. ( 1995). Creep Strengthening in a Discontinuous SiC-Al Composite , Metallurgical and Material Transactions, 26A(12): 3119-3129.
34.
Cadek, J., Oikawa, H. and Sustek, V. ( 1995). Threshold Creep Behavior of Discontinuous Aluminium and Aluminium Alloy Matrix Composites: An Overview, Material Science and Engineering, A190(1): 9-23.
35.
Yoshioka, H. , Suzumura, Y., Cadek , J., Zhu , S.J. and Milicka, K. (1998). Creep Behavior of ODS Aluminium Reinforced by Silicon Carbide Particulates: ODS Al-30 SiCP Composite , Material Science and Engineering , A248(1): 65-72.
36.
Li, Y. and Mohamed, F.A. ( 1997). An Investigation of Creep Behavior in an SiC-2124 Al Composite, Acta Materalia, 45(11): 4775-4785.
37.
Li, Y. and Langdon, T.G. ( 1997). Creep Behavior of an Al-6061 Metal Matrix Composite Reinforced with Alumina Particulates, Acta Materalia, 45(11): 4797-4806.
38.
Li, Y. and Langdon, T.G. ( 1999a). An Examination of a Substructure-invariant Model for the Creep of Metal Matrix Composites, Material Science and Engineering, A265(1): 276-284.
39.
Li, Y. and Langdon, T.G. ( 1999b). Fundamental Aspects of Creep in Metal Matrix Composites , Metallurgical and Material Transactions, 30A(2): 315-324.
40.
Lagneborg, R. and Bergman, B. (1976). The Stress/Creep Behavior of Precipitation-hardened Alloys, Metal Science, 10(1): 20-28.
41.
Gupta, V.K. , Singh, S.B., Chandrawat, H.N. and Ray, S. ( 2005). Modeling of Creep Behavior of a Rotating Disc in Presence of both Composition and Thermal Gradients, Journal of Engineering Materials and Technology, 127(1): 97-105.
Johnson, A.E. , Henderson, J. and Khan, B. (1961). Behavior of Metallic Thick-walled Cylindrical Vessels or Tubes Subjected to High Internal or External Pressures at Elevated Temperatures, Proceedings Institution of Mechanical Engineers, 175(25): 1043-1069.
