In the present study, new light weight nanocomposites (AZ311.5Al2 O3-Ca) based on magnesium alloy AZ31B are developed using disintegrated melt deposition technique. Microstructural characterization studies revealed equiaxed grain structure, minimal porosity, and good matrix-reinforcement interfacial integrity. The results also showed that addition of both nano-Al 2O3 and Ca led to a simultaneous improvement in 0.2% yield compressive strength (0.2% YCS), ultimate compressive strength (UCS), and work of fracture (WoF) of the AZ31B magnesium alloy while failure strain was slightly compromised. Moreover, excellent oxidation resistance of this composite was realized when compared to AZ31B up to 500°C. The results suggest that this composite formulation can be used in diverse engineering applications requiring light weight structural materials.
Han, L., Hu, H., Northwood, D.O. and Li, N. ( 2008). Microstructure and Nano-scale Mechanical Behavior of Mg-Al and Mg-Al-Ca Alloys, Materials Science and Engineering A, 473: 16-27.
2.
Zhang, Z., Tremblay, R. and Dube, D. ( 2004). Microstructure and Mechanical Properties of ZA104 (0.3-0.6Ca) Die-casting Magnesium Alloys, Materials Science and Engineering A, 385: 286-291.
3.
Itoi, T., Takahashi, K., Moriyama, H. and Hirohashi, M. ( 2008). A High-strength Mg-Ni-Y Alloy Sheet With a Long-period Ordered Phase Prepared by Hot-rolling, Scripta Materialia , 59: 1155-1158.
4.
Morisada, Y., Fujii, H., Nagaoka, T. and Fukusumi, M. ( 2006). Effect of Friction Stir Processing with SiC Particles on Microstructure and Hardness of AZ31, Materials Science and Engineering A, 433: 50-54.
5.
Nguyen, Q.B. and Gupta, M. ( 2008). Increasing Significantly the Failure Strain and Work of Fracture of Solidification Processed AZ31B Using Nano-Al2O3 Particulates , Journal of Alloys and Compounds, 459: 244-250.
6.
Tian, S., Wang, L., Sohn, K.Y., Kim, K.H., Xu, Y. and Hu, Z. ( 2006). Microstructure Evolution and Deformation Features of AZ31 Mg-alloy During Creep, Materials Science and Engineering A, 415: 309-316.
7.
Lazer, T., Nurnberg, M., Janz, A., Hartig, C., Letzig, D., Schmid-Fetzer, R. and Bormann, R. ( 2006). The Influence of Manganese on the Microstructure and Mechanical Properties of AZ31 Gravity Die Cast Alloys, Acta Materialia, 54: 3033-3041.
8.
Marya, M., Hector, L.G., Verma, R. and Tong, W. ( 2006). Microstructural Effects of AZ31 Magnesium Alloy on its Tensile Deformation and Failure Behaviors, Materials Science and Engineering A, 418: 341-356.
9.
Somekawa, H. and Mukai, T. (2005). Effect of Texture on Fracture Toughness in Extruded AZ31 Magnesium Alloy, Scripta Materialia, 53: 541-545.
10.
Czerwinski, F. (2004). The Early Stage Oxidation and Evaporation of Mg-9%Al-1%Zn Alloy, Corrosion Science, 46: 377-386.
11.
Popple, L.A. (1963). The Oxidation of Magnesium Alloys in Reactor Atmospheres, Journal of Nuclear Materials , 8: 60-76.
12.
Wang, X., Zeng, X., Wu, G., Yao, S. and Lai, Y. ( 2007). Surface Analysis and Oxidation Behavior of Y-Ion Implanted AZ31 Magnesium Alloys, Applied Surface Science, 253: 3574-3580.
13.
Wang, Y.Q., Wu, K. and Zheng, M.Y. ( 2006). Effects of Reinforcement Phases in Magnesium Matrix Composites on Microarc Discharge Behavior and Characteristics of Microarc Oxidation Coatings , Surface and Coatings Technology, 201: 353-360.
14.
Wang, X., Zeng, X., Wu, G. and Yao, S. ( 2007). The Effect of Y-Ion Implantation on the Oxidation of AZ31 Magnesium Alloy, Material Letters, 61: 968-970.
15.
Nguyen, Q.B. , Gupta, M. and Srivatsan, T.S. (2009). On the Role of Nano-alumina Particulate Reinforcements in Enhancing the Oxidation Resistance of Magnesium Alloy AZ31B, Materials Science and Engineering A, 500: 233-237.
16.
Ding, S.X., Lee, W.T., Chang, C.P., Chang, L.W. and Kao, P.W. ( 2008). Improvement of Strength of Magnesium Alloy Processed by Equal Channel Angular Extrusion, Scripta Materialia, 59: 1006-1009.
17.
Mingboa, Y. , Fusheng, P., Renjub, C. and Jia, S. (2008). Comparison About Effects of Sb, Sn and Sr on as-Cast Microstructure and Mechanical Properties of AZ61-0.7Si Magnesium Alloy, Materials Science and Engineering A, 489: 413-418.
18.
Garce’s, G., Muller, A., Onorbe, E., Perez, P. and Adeva, P. (2008). Effect of Hot Forging on the Microstructure and Mechanical Properties of Mg-Zn-Y Alloy, Journal of Materials Processing and Technology, 206: 99-105.
19.
Morisada, Y. , Fujii, H., Nagaoka, T. and Fukusumi, M. (2006). Nanocrystallized Magnesium Alloy - Uniform Dispersion of C60 Molecules, Scripta Materialia , 55: 1067-1070.
20.
Wenwen, D., Yangshan, S., Xuegang, M., Feng, X., Min, Z. and Dengyun, W. ( 2003). Microstructure and Mechanical Properties of Mg-Al Based Alloy with Calcium and Rare Earth Additions, Materials Science and Engineering A, 356: 1-7.
21.
Hassan, S.F. and Gupta, M. ( 2003). Development of High Strength Magnesium Copper Based Hybrid Composites with Enhanced Tensile Properties, Materials Science and Technology, 19: 253-259.
22.
Li, S.S., Tang, B. and Zeng, D.B. ( 2007). Effects and Mechanism of Ca on Refinement of AZ91D Alloy , Journal of Alloys and Compounds, 437: 317-321.
23.
Nguyen, Q.B. and Gupta, M. ( 2009). Microstructure and Mechanical Characteristics of AZ31B/ Al2O3 Nanocomposite with Addition of Ca, Journal of Composite Materials, 43: 5-17.
24.
You, B.S. , Park, W.W. and Chung, I.S. (2000). The Effect of Calcium Additions on the Oxidation Behavior in Magnesium Alloys, Scripta Materialia, 42: 1089-1094.
25.
Sakamoto, M., Akiyama, S., Hagio, T. and Ogi, K. ( 1997). The Difference of the Ignition Temperatures Affected by Adding Elements, Al, Ca, Mn, into Magnesium Alloys, Journal of Japan Foundry Engineering Society, 69: 227-233.
26.
Wu, G., Fan, Y., Gao, H., Zhai, C. and Zhu, Y.P. ( 2005). The Effect of Ca and Rare Earth Elements on the Microstructure, Mechanical Properties and Corrosion Behavior of AZ91D, Materials Science and Engineering A, 408: 255-263.
27.
Lan, L. , Hu, H. and Northwood, D.O. (2008). Effect of Ca Additions on Microstructure and Microhardness of an as-Cast Mg-5.0 wt.% Al Alloy, Material Letters, 62: 381-384.
28.
ASM Handbook (1992). Alloy Phase Diagrams, Vol. 3, p. 118, ASM International at Materials , Park, Ohio.
29.
Towle, D.J. and Friend, C.M. (1993). Comparison of Compressive and Tensile Properties of Magnesium Based Metal Matrix Composites, Materials Science and Technology, 9: 35-41.
30.
Szaraz, Z., Trojanova, Z., Cabbibo, M. and Evangelista, E. ( 2007). Strengthening in a WE54 Magnesium Alloy Containing SiC Particles, Materials Science and Engineering A, 462: 225-229.
31.
Han, Q. and Dunand, D.C. (2000). Microstructure and Mechanical Properties of Magnesium Containing High Volume Fractions of Yttria Dispersoids, Materials Science and Engineering A, 277: 297-304.
32.
Dai, L.H. , Ling, Z. and Bai, Y.L. (2001). Size-dependent Inelastic Behavior of Particle-reinforced Metal-Matrix Composites, Composite Science and Technology, 61: 1057-1063.
33.
Nguyen, Q.B. and Gupta, M. (2008). Enhancing Compressive Response of AZ31B Magnesium Alloy using Alumina Nanoparticulates, Composite Science and Technology, 68: 2185-2192.
34.
Baboian, R. (1995). Corrosion Tests and Standards , p. 22, ASTM Manual Series: MNL 20 ASTM,Fredericsburg.
