We have studied the effect of nanoparticles on wear resistance and surface hardness of a dental glass-ionomer cement. The effects of composition, loading ratio, and surface modification of the nanoparticles as well as particle size were investigated as well. Commercially available spherical nanoparticles were incorporated into a commercial dental cement Fuji II. One of the nanoparticles was surface-modified with poly(acrylic acid) via surface-initiated atom-transfer radical polymerization. All the cements were conditioned in distilled water at 37°C for 24 h prior to testing. The results showed that all the particles incorporated (either nano-, micro-, or surface-modified) increased the resistance to attrition of Fuji II by approximately 50% but slightly decreased the resistance to abrasion. Most of the modified cements showed increased surface hardness values as compared to Fuji II. Surface modification significantly increased the loading of the nanoparticles into Fuji II from 10% to 30% as compared to the unmodified ones (only 10% at the maximum). Within the limitations of this study, it seems that incorporation of 1-3% spherical silica nanoparticles can effectively improve both resistance to attrition and surface hardness of Fuji II cement.
Lai, Y.H. , Kuo, M.C., Huang, J.C. and Chen, M. (2007). On the PEEK Composites Reinforced by Surface-modified Nano-silica, Mater. Sci. Eng. A, 458: 158-169.
2.
Sun, Y., Zhang, Z. and Wong, C.P. ( 2005). Study on Mono-dispersed Nano-size Silica by Surface Modification for Underfill Applications, J. Colloid Interface Sci., 292: 436-444.
3.
Sumita, M., Shizuma, T., Miyasaka, K. and Ishikawa, K. ( 1983). Effect of Reducible Properties of Temperature, Rate of Strain, and Filler Content on the Tensile Yield Stress of Nylon 6 Composites Filled with Ultrafine Particles, J. Macromol. Sci. Part B Phys., 22: 601-618.
4.
Kuo, M.C. , Tsai, C.M., Huang, J.C. and Chen, M. (2005). PEEK Composites Reinforced by Nano-sized SiO2 and Al2O3 Particulates, Mater. Chem. Phys. , 90: 185-195.
5.
Bauer, F., Decker, U., Ernst, H., Findeisen, M., Langguth, H., Mehnert, R., Sauerland, V. and Hinterwaldner, R. ( 2006). Functionalized Inorganic/Organic Nanocomposites as New Basic Raw Materials for Adhesives and Sealants. Part 2, Int. J. Adhes. Adhes., 26: 567-570.
6.
Musanje, L. and Ferracane, J.L. ( 2004). Effects of Resin Formulation and Nanofiller Surface Treatment on the Properties of Experimental Hybrid Resin Composite, Biomaterials, 25: 4065-4071.
7.
Mitra, S.B., Wu, D. and Holmes, B.N. ( 2003). An Application of Nanotechnology in Advanced Dental Materials , J. Am. Dent. Assoc., 134(10): 1382-1390.
8.
Kent, B., Lewis, B. and Wilson, A. ( 1973). The Properties of a Glass Ionomer Cement, Br. Dent. J., 135: 322-326.
9.
Wilson, A.D. and McLean, J.W. ( 1988). Glass-ionomer Cements, Quintessence Publisher Co, Chicago, IL.
10.
Craig, R.G. ( 1997). Dental Restorative Materials, Mosby-Year Book Inc, St. Louis, MO.
11.
Yap, A.U.J. , Pek, Y.S., Kumar, R.A., Cheang, P. and Khor, K.A. (2002). Experimental Studies on a New Bioactive Material: HA Ionomer Cements, Biomaterials , 23(3): 955-962.
12.
Gu, Y.W. , Yap, A.U.J., Cheang, P., Koh, Y.L. and Khor, K.A. (2005). Development of Zirconia-glass Ionomer Cement Composites, J. Non-Cryst. Solids, 351(6,7): 508-514.
13.
Prentice, L.H. , Tyas, M.J. and Burrow, M.F. (2006). The Effect of Ytterbium Fluoride and Barium Sulphate Nanoparticles on the Reactivity and Strength of a Glass-ionomer Cement, Dent. Mater., 22(8): 746-751.
14.
Gu, B. and Sen, A. ( 2002). Synthesis of Aluminum Oxide/Gradient Copolymer Composites by Atom Transfer Radical Polymerization, Macromolecules, 35(23): 8913-8916.
15.
Xia, Y., Zhang, F., Xie, H. and Gu, N. ( 2008). Nanoparticle-reinforced Resin-based Dental Composites, J. Dent., 36(6): 450-455.
16.
Webster, T.J. , Siegel, R.W. and Bizios, R. (1999). Osteoblast Adhesion on Nanophase Ceramics, Biomaterials, 20(13): 1221-1227.
17.
Tian, M., Gao, Y., Liu, Y., Liao, Y., Hedin, N.E. and Fong, H. ( 2008). Fabrication and Evaluation of Bis-GMA/TEGDMA Dental Resins/Composites Containing Nano Fibrillar Silicate, Dent. Mater., 24(2): 235-243.
18.
Chen, T.M. and Brauer, G.M. ( 1982). Solvent Effects on Bonding Organo-silane to Silica Surfaces , J. Dent. Res., 61(12): 1439-1443.
19.
Turssi, C.P., Ferracane, J.L. and Vogel, K. ( 2005). Filler Features and their Effects on Wear and Degree of Conversion of Particulate Dental Resin Composites, Biomaterials , 26(24): 4932-4937.
20.
Wilson, K.S., Zhang, K. and Antonucci, J.M. ( 2005). Systematic Variation of Interfacial Phase Reactivity in Dental Nanocomposites, Biomaterials, 26(25): 5095-5103.
21.
Wang, X.S., Jackson, R.A. and Armes, S.P. ( 2000). Facile Synthesis of Acidic Copolymers via Atom Transfer Radical Polymerization in Aqueous Media at Ambient Temperature, Macromolecules, 33(2): 255-257.
22.
Peez, R. and Frank, S. ( 2006). The Physical-Mechanical Performance of the New Ketac (TM) Molar Easymix Compared to Commercially Available Glass Ionomer Restoratives , J. Dent., 34(8): 582-587.
23.
Condon, J.R. and Ferracane, J.L. ( 1997). In Vitro Wear of Composite with Varied Cure, Filler Level, and Filler Treatment, J. Dent. Res., 76(7): 1405-1411.
24.
Lambrechts, P. , Goovaerts, K., Bharadwaj, D., De Munck, J., Bergmans, L., Peumans, M. and Van Meerbeek , B. (2006). Degradation of Tooth Structure and Restorative Materials: A Review, Wear, 261: 980-986.
25.
Sulong, M.Z.A.M. and Aziz, R.A. (1990). Wear of Materials Used in Dentistry: A Review of the Literature, J. Prosthet. Dent. , 63: 342-349.
26.
Lutz, F., Phillips, R.W., Roulet, J.F. and Setcos, J.C. ( 1984). In Vivo and In Vitro Wear of Potential Posterior Composites , J. Dent. Res., 63(6): 914-920.
27.
Sakaguchi, R.L., Douglas, W.H., DeLong, R. and Pintado, M.R. (1986). The Wear of a Posterior Composite in an Artificial Mouth: A Clinical Correlation, Dent. Mater., 2(6): 235-40.
28.
Pallav, P., de Gee, A.J., Werner, A. and Davidson, C.L. ( 1993). Influence of Shearing Action of Food on Contact Stress and Subsequent Wear of Stress-bearing Composites, J. Dent. Res., 72(1): 56-61.
29.
Gu, Y.W. , Yap, A.U.J., Cheang, P. and Kumar, R. (2004). Spheroidization of Glass Powders for Glass Ionomer Cements, Biomaterials, 25(18): 4029-4035.
30.
Bates, J.F. , Stafford, G.D. and Harrison, A. (1975). Masticatory Function; A Review of the Literature. 1. The Form of the Masticatory Cycle, J. Oral Rehabil., 2(3): 281-301.
31.
Sajewicz, E. (2006). On Evaluation of Wear Resistance of Tooth Enamel and Dental Materials, Wear, 260(11,12): 1256-1261.
32.
McCabe, J.F., Wang, Y. and Braem, M. (2000). Surface Contact Fatigue and Flexural Fatigue of Dental Restorative Materials, J. Biomed. Mater. Res., 50(3): 375-380.
33.
Nihei, T., Dabanoglu, A., Teranaka, T., Kurata, S., Ohashi, K., Kondo, Y., Yoshino, N., Hickel, R. and Kunzelmann, K.-H. ( 2008). Three-body-wear Resistance of the Experimental Composites Containing Filler Treated with Hydrophobic Silane Coupling Agents, Dent. Mater., 24(6): 760-764.
34.
Xie, D. , Brantley, W.A., Culbertson, B.M. and Wang, G. (2000). Mechanical Properties and Microstructures of Glass-ionomer Cements, Dent. Mater. , 16(2): 129-138.
