The quality of interfacial interaction is dictated by the surface chemistry of the carbon fibers and the composition of the matrix. The composition of polystyrene was modified by the addition of maleic anhydride (MAH)-grafted polystyrene (MAH-g-polystyrene). The surface properties of the various matrix formulations were characterized by contact angle. Carbon fibers were modified by oxidation in nitric acid. The surface composition of the carbon fibers was characterized. The interaction between modified polystyrene and the carbon fibers was studied by single fiber pull-out tests. The best adhesion behavior was achieved between polystyrene containing grafted MAH and nitric acid oxidation carbon fibers. The addition of MAH-g-polystyrene to the unmodified polystyrene caused the interfacial shear strength to increase. The apparent interfacial shear strength of this fiber-matrix combination allowed for the utilization of 100% of the yield tensile strength of polystyrene.
Henshaw, J.M. , Han, W.J. and Owens, A.D. (1996). An Overview of Recycling Issues for Composite Materials, J. Thermoplast. Compos. Mater. , 9(1): 4-20.
2.
Yue, L., Zheng, Y. and Jin, D. ( 2008). Spherical Porous Framework of Calcium Carbonate Prepared in the Presence of Precursor PS-PAA as Template, Microporous Mesoporous Mater ., 113(1-3): 538-541.
3.
Svensson, N. , Shishoo, R. and Gilchrist, M. (1998). Manufacturing of Thermoplastic Composites from Commingled Yarns A Review, J. Thermoplast. Compos. Mater., 11: 22-56.
4.
Park, S.J., Papirer, E. and Donnet, J.B. ( 1994). Influence of Electrochemical Treatment on the Surface-properties of Carbon-fibers - Acid-Base Character and Adsorption Enthalpy , J. Chim. Phys. Phys.-Chim. Biol., 91: 203-222.
5.
Yang, M., Yao, X., Wang, G. and Ding, H. ( 2008). A Simple Method to Synthesize Sea Urchin-like Polyaniline Hollow Spheres, Colloids Surf. A: Physicochem. Eng. Aspects , 324(1-3): 113-116.
6.
Priya, L. and Jog, J.P. ( 2002). Poly(vinylidene fluoride)/Clay Nanocomposites Prepared by Melt Intercalation: Crystallization and Dynamic Mechanical Behavior Studies , J. Polym. Sci. B, 40(15): 1682-1689.
7.
Drobny, J.G. (2001). Blends and Composites Based on Fluoropolymers, Macromol. Symp., 170: 149-156.
8.
Nyambo, C., Kandare, E., Wang, D. and Wilkie, C.A. ( 2008). Flame-retarded Polystyrene: Investigating Chemical Interactions between Ammonium Polyphosphate and MgAl Layered Double Hydroxide, Polym. Degrad. Stab., 93(9): 1656-1663.
9.
Bismarck, A. and Schulz, E. ( 2003). Adhesion and Friction Behavior between Fluorinated Carbon Fibers and Poly (vinylidene fluoride) , J. Mater. Sci., 38: 4965-4972.
10.
Kostov, G.K. and Nikolov, A.T. ( 1994). Carbon-fiber Modified Composites of Tetrafluoroethylene-Ethylene Copolymers, Polym. Compos., 15: 367-374.
11.
Park, S.J., Seo, M.K. and Rhee, K.Y. ( 2003). Studies on Mechanical Interfacial Properties of Oxy-flourinated Carbon Fibers-reinforced Composites, Mater. Sci. Eng. A, 356: 219-226.
12.
Mounir El Sayed, A., Etoh, B., Yamauchi , A. and Yang, W.-K. (2008). Effect of Anionic and Cationic Exchange Polymeric Layers on Current-Voltage Curves and Chronopotentiometry of a Charged Composite Membrane, Desalination, 229(1-3): 109-117.
13.
Cheng, X., Zhao, Q., Yang, Y., Tjong, S.C. and Li, R.K.Y. ( 2008). A Facile Method to Prepare CdS/Polystyrene Composite Particles, J. Colloid. Interface Sci., 326(1): 121-128.
14.
Song, B.H., Bismarck, A., Tahhan, R. and Springer, J. ( 1998). A Generalized Drop Length-Height Method for Determination of Contact Angle in Drop-on-fiber Systems, J. Colloid Interface Sci., 197: 68-77.
15.
Chen, J.H., Cheng, C.-Y., Chiu, W.-Y., Lee, C.-F. and Liang, N.-Y. ( 2008). Synthesis of ZnO/Polystyrene Composites Particles by Pickering Emulsion Polymerization, Eur. Polym. J., 44(10): 3271-3279.
16.
Garbassi, F. and Occhiello, E. ( 2000). Surfaces and their Modification, In: Brostow, W. (ed.), Performance of Plastics , pp. 373-400, Hanser Gardner, Cincinnati.
17.
Meretz, S., Linke, T., Schulz, E., Hampe, A. and Hentschel, M. ( 1992). Diameter Measurement of Small Fibres: Laser Diffraction and Scanning Electron Microscopy Technique Results do not Differ Systematically , J. Mater. Sci. Lett., 11: 1471-1472.
18.
DiFrancia, C., Ward, T.C. and Claus, R.O. (1996). The Single-fibre Pull-out Test 1. Review and Interpretation, Composites A, 27: 597-612.
19.
Bismarck, A. , Richter, D., Wuertz , C., Kumru, M.E., Song, B. and Springer, J. (2000). Adhesion: Comparison between Physico-chemical Expected and Measured Adhesion of Oxygen-plasma-treated Carbon Fibers and Polycarbonate, J. Adhesion, 73: 19-42.
20.
Bisschop, J. and van Mier, J.G.M. (2008). Effect of Aggregates and Microcracks on the Drying Rate of Cementitious Composites, Cem. Concr. Res., 38(10): 1190-1196.
21.
Ho, K.K.C. , Lamoriniere, S., Kalinka , G., Schulz, E. and Bismarck, A. (2007). Interfacial Behaviour between Atmospheric Plasma Fluorinated Carbon Fibres and Poly (vinylidene fluoride), J. Colloid. Interface Sci. , 313: 476-84.
22.
Della Volpe, C., Maniglio, D., Brugnara , M., Siboni, S. and Morra, M. (2004). The Solid Surface Free Energy Calculation - I. In Defense of the Multicomponent Approach , J. Colloid. Interface Sci. , 271: 434-453.
23.
Bismarck, A. , Kumru, M.E., Song, B., Springer, J., Moos, E. and Karger-Kocsis , J. (1999 ). Study on Surface and Mechanical Fiber Characteristics and their Effect on the Adhesion Properties to a Polycarbonate Matrix Tuned by Anodic Carbon Fiber Oxidation, Composites A, 30: 1351-1366.
24.
Saito, R. and Hosoya, T. ( 2008). Water Vapor Barrier Property of Organic-Silica Nanocomposite Derived from Perhydropolysilazane on Polyvinyl Alcohol Substrate , Polymer, 49(21): 4546-4551.
