Abstract
Recently, a new confining device - a lattice of interlaced fiber-reinforced plastic (FRP) ribs that were wrapped by an FRP skin, has been developed to provide better confinement to a concrete core through interfacial mechanical interlocking [1,2]. A systematic study has validated the enhanced structural capacities over traditional FRP tube encased concrete counterparts. However, like traditional FRPs, advanced grid stiffened FRP tube confined concrete cylinders (AGS-FRPC) are vulnerable to fire hazards. The purpose of this study was to investigate the enhancement of fire tolerance as a result of incorporating organically modified montmorillonite (MMT) and a traditional fire retardant additive (TSWB®) into a vinyl ester (VE) matrix. Two series of samples were prepared. The first series consisted of groups A, B, C, and D, in which A was regular AGS-FRPC, B was enhanced with MMT, C was enhanced with TSWB® fire retardant additive, and D was enhanced with both MMT and TSWB®. The second series of samples was identical to the first series as a control, and it consisted of groups of E, F, G, and H, respectively. The only difference was that the first series was exposed to a jet fire of 982°C for 5 min while the second series was not. It was found that fire exposure had a significant impact on reducing the residual strength of the confined concrete cylinders. The introduction of MMT increased both the fire tolerance and compressive strength of AGS-FRPC. The TSWB additive was effective in minimizing the effect of the fire hazard, but it reduced the compressive strength.
Get full access to this article
View all access options for this article.