Preparation and Physical Characterization of Gelatin—Starch/Hydroxyapatite Porous Composite Scaffold Fabricated Using Novel Microwave Energy under Vacuum Technique

Abstract

This work was initiated to explore the possibility of preparing porous scaffold, using microwave energy under vacuum technique. The hypothesis was that microwave energy under vacuum may promote effective cross-linking of the biopolymers during drying as well as to lead desirable physical characteristics of composites for hard tissue-like bone regeneration. Three different percentages of hydroxyapatite (HA) was reinforced with gelatin—starch polymer network to prepare porous scaffolds. EDS result of the prepared scaffold composite showed that Ca/P ratio of the HA phase was the same for all the HA percentages, 1.7, which is slightly higher than the standard value of 1.67. FTIR results showed the existence of a carbonate group along with the peaks of phosphate groups and hydroxyls, the functional group of HA. The scaffold composite obtained by microwave energy under vacuum technique had good mechanical and structural properties, which showed a promising potential for bone-substitution applications.

Keywords

microwave energy composite porous scaffold biopolymers hydroxyapatite.

Get full access to this article

View all access options for this article.

References

Word, A.G. and Courts, A. (1977). The Science and Technology of Gelatin, Academic Press, London.

Chang, M.C. , Ko, C. and Douglas, W.H. (2003). Preparation of Hydroxyapatite-Gelatin Nanocomposite , Biomaterials, 24: 2853-2862.

Yaylaoglu, M.B. , Korkusuz, P. , Ors , U. , Korkusuz, F. and Hasirci, V. (1999). Development of a Calcium Phosphate-Gelatin Composite as a Bone Substitute and Its Use in Drug Release , Biomaterials, 20: 711-719.

Brown, P.W. and Constantz, B. (1994). Hydroxyapatite and Related Materials, CRC Press, London.

Malafaya, P.B. , Gallardo, A. , Reis, R.L. and San Roman, J. (1999). New Porous Starch-Based Polymeric Drug Delivery Systems for Arthritis and Rheumatism Treatment, In: 15th European Conference on Biomaterials, Bordeaux, France, p. 325.

Reis, R.L. and Cunha, A.M. (1995). Characterization of Two Biodegradable Polymers of Potential Application within the Biomedical Field, Journal of Materials Science, Materials in Medicine, 6: 786-792.

Reis, R.L. , Mendes, S.C. , Cunha, A.M. and Bevis, M. (1997). Processing and In-vitro Degradation of Starch/EVOH Thermoplastic Blends, Polymer International, 43: 347-353.

Reis, R.L. , Cunha, A.M. , Allan, P.S. and Bevis, M.J. (1996). Mechanical Behavior of Injection-Molded Starch-Based Polymers, Polymers for Advanced Technology, 7: 784-790.

Chen, G. , Ushida, T. and Tateishi, T. (2002). Scaffold Design for Tissue Engineering, Macromolecular Biosciences, 2: 67-77.

10.

Nam, Y.S. , Yoon, J.J. and Park, T.G. (2000). A Novel Fabrication Method of Macroporous Biodegradable Polymer Scaffolds Using Gas Foaming Salt as a Porogen Additive, Journal of Biomedical Materials Research, Applied Biomaterials, 53: 1-7.

11.

Mooney, D.J. , Baldwin, D.F. , Suh , N.P. , Vacanti, J.P. and Langer, R. (1996). Novel Approach to Fabricate Porous Sponges of Poly(D,L-lactic-co-glycolic acid) without the Use of Organic Solvents, Biomaterials, 17: 1417-1722.

12.

Patel, V.R. and Amiji, M.M. (1996). Preparation and Characterization of Freeze Dried Chitosan/Poly(Ethylene Oxide) Hydrogels for Site-Specific Antibiotic Delivery in the Stomach, Pharmaceutical Research , 13: 588-593.

13.

Schugens, C. , Maquet, V. , Grandls, C. , Jerome, R. and Teyssie, P. (1996). Polylactide Macroporous Biodegradable Implants for Cell Transplantation, Journal of Biomedical Materials Research, 30(4): 449-461.

14.

Curtil, A. , Pegg, D.E. and Wilson, A. (1997). Freeze Drying of Cardiac Valves in Preparation for Cellular Repopulation, Cryobiology, 34(1): 13-22.

15.

Kim, H.-W. , Knowles, J.C. and Kim, H.-E. (2004). Hydroxyapatite and Gelatin Composite Foams Processed via Novel Freeze-Drying and Crosslinking for Use as Temporary Hard Tissue Scaffolds, Wiley InterScience, New York.

16.

Yannas, I.V. , Burke, J.F. and Stasikelis, P.J. (1985). US Patent 4522752.

17.

Whang, K. and Healy, K.E. (2002). Processing of Polymer Scaffold: Freeze Drying , In: Atala, A. and Lanza, R.P. (eds), Methods of Tissue Engineering , Academic Press, San Diego, CA , pp. 697-704.

18.

Korey, D.J. and Schwartz, J.B. (1989). Effects of Excipients on the Crystallization of Pharmaceutical Compounds during Lyophilization, Journal of Parenteral Science and Technology, 43(2): 80-87.

19.

Durance, T.D. and Wang, J.H. (2002). Energy Consumption, Density and Rehydration Rate of Vacuum Microwave and Hot Air Convection Dehydrated Tomatoes, Journal of Food Science, 67(6): 2212-2216.

20.

Scaman, C.H. and Durance, T.D. (2005). Combined Microwave Vacuum Drying. In: Sun, D.-W. (ed.), Emerging Technologies for Food Processing, Elsevier, London, pp. 507-530.

21.

Cui, Z.-W. , Xu, S.-Y. and Sun , D.-W. (2004). Microwave Vacuum Drying Kinetics of Carrot Slices. Journal of Food Engineering, 65: 157-164.

22.

Jaya, S. and Durance, T.D. (2007). Influence of Processing Methods on Mechanical and Structural Characteristics of Vacuum Microwave Dried Biopolymer Foams , Food and Bioproducts Processing, Transactions of the Institute of Chemical Engineers: Part C, 85(C3): 264-272.

23.

Durance, T.D. , Sundaram, J. and Ressing, M. (2005). Method for Producing Hydrocolloid Sponges and Foams, PCT/CA2005/001192.

24.

Labuza, T.P. (1984). Moisture Sorption: Practical Aspects of Isotherm Measurement and Use, American Association of Cereal Chemists , Minnesota.

25.

Roos, Y.H. and Karel, M. (1991). Phase Transitions of Mixtures of Amorphous Polysaccharides and Sugars. Biotechnology Progress, 7: 49-53.

26.

Peleg, M. , Roy, I. , Campanella, O.H. and Normand, M.D. (1989). Mathematical Characterization of the Compressive Stress Strain Relationship of Spongy Baked Goods. Journal of Food Science, 54(4): 947-949.

27.

Calzada, J.F. and Peleg, M. (1978). Mechanical Interpretation of Compressive Stress-Strain Relationships of Solid Foods, Journal of Food Science, 43: 1087-1092.

28.

Swyngedau, S. , Nussinovitch, A. , Roy , I. , Peleg, M. and Huang, V. (1991). Comparison of Four Models for the Compressibility of Breads and Plastic Foams . Journal of Food Science, 56(3): 756-759.