Semimetallic Brake Friction Materials Containing ZrSiO4: Friction Performance and Friction Layers Evaluation

Abstract

The effect of ZrSiO₄ (zircon) content on friction performance and friction surfaces of semimetallic brake friction materials is discussed. The experimental results indicate that the varying content of zircon affects the friction performance as well as plays crucial role in the iron film formation on the friction surfaces. The friction layers, formed during friction process, were carefully characterized using scanning electron microscopy with energy dispersive X-ray microanalysis, and X-ray diffraction methods. The phenomenon of two different types of iron film formation (film I and film II) on the friction surfaces is proposed and their formation and destruction mechanism is described. Despite the compositions of both iron films being similar, film I is formed by steel wool itself and film II by the debris from either disc or steel wool. The relationships among formulation, friction performance, and friction surfaces are summarized.

Keywords

brake friction materials friction layers friction mechanisms surface analysis zircon (ZrSiO4).

Get full access to this article

View all access options for this article.

References

Lu, Y. , Tang, C.F. , Zhao, Y. and Wright, M.A. (2004). Optimization of a Semimetallic Friction Material Formulation, Journal of Reinforced Plastics and Composites , 23(14): 1537-1545.

Lu, Y. , Tang, C.F. and Wright, M.A. (2002). Optimization of a Commercial Brake Pad Formulation , Journal of Applied Polymer Science, 84(13): 2498-2504.

Tang, C.F. and Lu, Y. (2003). Optimization of an Industrial Friction Material Formulation, Tribology Transactions, 46(1): 19-23.

Jang, H. , Ko, K. , Kim, S.J. , Basch, R.H. and Fash, J.W. (2004). The Effects of Metal Fibers on the Friction Performance of Automotive Brake Friction Materials, Wear, 256(3-4): 406-414.

Zhao, Y. , Lu, Y. and Wright, M.A. (2006). Sensitivity Series and Friction Surface Analysis of Non-metallic Friction Materials, Materials & Design , 27(10): 833-838.

Lu, Y. (2002). A Combinatorial Approach for Automotive Friction Materials: Combined Effects of Ingredients on Friction Performance, Polymer Composites, 23(5): 814-823.

Tang, C.F. and Lu, Y. (2004). Combinatorial Screening of Ingredients for Steel Wool Based Semimetallic and Aramid Pulp Based Nonasbestos Organic Brake Materials , Journal of Reinforced Plastics and Composites, 23(1): 51-63.

Lu, Y. (2003). A Golden Section Approach to Optimization of Automotive Friction Materials, Journal of Materials Science, 38(5): 1081-1085.

Lu, Y. (2006). A Combinatorial Approach for Automotive Friction Materials: Effects of Ingredients on Friction Performance, Composites Science Technology, 66(3-4): 591-598.

10.

Han, L. , Huang, L. , Zhang , J. and Lu , Y. (2006). Optimization of Ceramic Friction Materials, Composites Science Technology, 66(15): 2895-2906.

11.

Chan, D. and Stachowiak, G.W. (2004). Review of Automotive Brake Friction Materials, Proceedings of Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 218(9): 953-966.

12.

Jang, H. and Kim, S.J. (2000). The Effects of Antimony Trisulfide (Sb2S3) and Zirconium Silicate (ZrSiO4) in the Automotive Brake Friction Material on Friction Characteristics, Wear, 239(2): 229-236.

13.

Ma, Y. , Martynkova, G.S. , Valaskova, M. , Matejka, V. and Lu, Y. (2008). Effects of ZiSiO4 in Non-metallic Brake Friction Materials on Friction Performance, Tribology International , 41(3): 166-174.

14.

Filip, P. , Weiss, Z. and Rafaja, D. (2002). On Friction Layer Formation in Polymer Matrix Composite Materials for Brake Applications, Wear, 252(3-4): 189-198.

15.

Wirth, A. and Whistaker, R. (1992). An Energy Dispersive X-ray and Imaging X-ray Photoelectron Spectroscopical Study of Transfer Film Chemistry and Its Influence on Friction Coefficient, Journal of Physics Part D Applied Physics, 25(1A): 38-43.

16.

Osterle, W. and Urban, I. (2006). Third Body Formation on Brake Pads and Rotors, Tribology International , 39(5): 401-408.

17.

Cho, M.H. , Cho, K.H. , Kim , S.J. , Kim , D.H. and Jang, H. (2005). The Role of Transfer Layers on Friction Characteristics in the Sliding Interface between Friction Materials against Gray Iron Brake Disks, Tribology Letters , 20(2): 101-108.

18.

Eriksson, M. , Bergman, F. and Jacobson, S. (2002). On the Nature of Tribological Contact in Automotive Brakes, Wear, 252(1-2): 26-36.

19.

Eriksson, M. and Jacobson, S. (2000). Tribological Surfaces of Organic Brake Pads, Tribology International, 33(12): 817-827.

20.

Osterle, W. and Urban, I. (2004). Friction Layers and Friction Films on PMC Brake Pads, Wear, 257(1-2): 215-226.

21.

Osterle, W. , Grispentrog, M. , Gross , T. and Urban, I. (2001). Chemical and Microstructural Changes Induced by Friction and wear of Brakes , Wear, 251(1-12): 1469-1476.

22.

Mueller, M. and Ostermeyer, G.P. (2007). Cellular Automata Method for Macroscopic Surface and Fricyion Dynamics in Brake Systems , Tribology International, 40(6): 942-952.