HfB2—20vol% SiC composite was hot-pressed at 1900°C with silicon nitride (Si3N4) as sintering aid. Sinterability and mechanical properties were investigated and compared to the composite without the sintering aid. It was shown that the addition of Si3N 4 greatly improved the powder sinterability and enabled the production of nearly full dense composite. The flexural strength and fracture toughness were 590 MPa and 5.43 MPa m1/2, respectively. The oxidation resistance of composite doped with Si3N4 was evaluated by the oxyacetylene oxidation test and the oxidation mechanism was discussed.
Opeka, M.M., Talmy, I.G. and Zaykoski, J.A. (2004). Oxidation-based Materials Selection for 2000°C+hypersonic Aerosurfaces: Theoretical Considerations and Historical Experience, Journal of Materials Science, 39: 5887-5904.
2.
Scatteia, L., Borrelli, R. and Marino, G. (2005). AIAA/CIRA 13th International Space Planes and Hypersonics Systems and Technologies, pp. 3267-3272, Kyoto, Japan.
3.
Upadhya, K.Y. and Hoffman, J.M. (1997). Materials for Ultra-high Temperatures Structural Applications, Am. Ceram. Soc. Bull. , 58: 51-56.
4.
Mishra, S.K. , Das, S.K., Ray , A.K. and Ramachandrarao , P. (2002 ). Effect of Fe and Cr Addition on the Sintering Behavior of ZrB2 Produced by Self-propagating High-temperature Synthesis, J. Am. Ceram. Soc., 85(11): 2846-2848.
5.
Yan, Y.J. , Huang, Z.R., Dong , S.M. and Jiang, D.L. (2006). Pressureless Sintering of High-density ZrB2-SiC Ceramic Composites, J. Am. Ceram. Soc., 89(11): 3589-3592.
6.
Monteverde, F. and Bellosi, A. (2003). Beneficial Effects of AlN as Sintering Aid on Microstructure and Mechanical Properties of Hot-pressed ZrB2, Advanced Engineering Materials, 5: 508-512.
7.
Monteverde, F. and Bellosi, A. (2004). Efficacy of HfN as Sintering Aid in the Manufacture of Ultrahigh Temperature Metal Diborides Matrix Ceramics , J. Mat. Res., 19(12): 3576.
8.
Brach, M., Sciti, D., Balbo, A. and Bellosi, Al. (2005). Short-term Oxidation of a Ternary Composite in the System AlN-SiC-ZrB2, Journal of the European Ceramic Society, 25: 1771-1780.
9.
Tabaru, T. (2003). Oxidation Behavior of Mo(Si0.6Al0.4)2/HfB2 Composites as Aluminum Reservoir Materials for Protective Al2O3 Formation, Scripta Material, 49: 767-772.
10.
Levine, S.R. (2003). Tantalum Addition to Zirconium Diboride for Improved Oxidation Resistance. NASA/TM-2003-212483.
11.
Ye, D.L. and Hu, J.H. (2002). Handbook of Thermodynamic Data of Inorganics, 2nd edn, pp. 565-568, Metallurgical Industry Press , Beijing.
12.
Rezaie, A., Fahrenholtz, W.G. and Hilmas, G.E. (2006). Oxidation of Zirconium Diboride-silicon Carbide at 1500°C at a Low Partial Pressure of Oxygen, J. Am. Ceram. Soc., 89(10): 3240-3245.
13.
Fahrenholtz, W.G. (2007). Thermodynamic Analysis of ZrB2-SiC Oxidation: Formation of a SiC-depleted Region, J. Am. Ceram. Soc., 90(1): 143-148.
14.
Monteverde, F. and Bellosi, A. (2005). The Resistance to Oxidation of an HfB2-SiC Composite, Journal of the European Ceramics Society, 25: 1025-1031.
15.
Costello, J.A. and Tressler, R.E. (1981). Oxidation Kinetics of Hot-pressed and Sintered α-SiC, J. Am. Ceram. Soc. , 64(6): 327-331.
16.
Singhal, S.C. (1976). Oxidation Kinetics of Hot-pressed Silicon Carbide, J. Mater. Sci., 11: 1246-1253.
