A new numerical technique, the discrete singular convolution (DSC) method, is developed for static analysis of thick symmetric cross-ply laminated composite plates based on the first-order shear deformation theory of Whitney and Pagano [1]. Regularized Shannon's delta (RSD) kernel and Lagrange delta sequence (LDS) kernel are selected as singular convolution to illustrate the present algorithm. In the proposed approach, the derivatives in both the governing equations and the boundary conditions are discretized by the method of DSC. The bending behaviors of symmetric cross-ply laminated plates for different boundary and load conditions are presented. A comparison of the results with those available in literature has been presented. The results obtained by DSC method were compared with those obtained by the other numerical and analytical methods. It is found that both types of kernels give accurate results of plate deflection, but the regularized Shannon's delta (RSD) kernel give better values of stresses than the Lagrange delta sequence (LDS) kernel.
Whitney, J.M. and Pagano, N.J. (1970). Shear Deformation in Heterogeneous Anisotropic Plates, Journal of Applied Mechanics, ASME, 37: 1031-1036.
2.
Wei, G.W. (1999). Discrete Singular Convolution for the Solution of the Fokker-Planck Equations, J, Chem, Phys., 110: 8930-8942.
3.
Wei, G.W. (2000). Solving Quantum Eigenvalue Problems by Discrete Singular Convolution, J. Phys. B: At. Mol. Opt. Phys., 33: 343-352.
4.
Wan, D.C. , Patnaik, B.S.V. and Wei , G.W. (2001). A New Benchmark Quality Solution for the Buoyancy-driven Cavity by Discrete Singular Convolution, Numerical Heat Transfer, Part B, 40: 199-228.
5.
Xiong, W., Zhao, Y. and Gu, Y. (2003). Parameter Optimization in the Regularized Shannon's Kernels of Higher-order Discrete Singular Convolutions, Communications Num . Meth. Engineering, 19: 377-386.
6.
Wei, G.W. (2000). Discrete Singular Convolution for the Sine-Gordon Equation, Physica D, 137: 247-259.
7.
Zhao, S., Wei, G.W. and Xiang, Y. (2005). DSC Analysis of Free-Edged Beams by an Iteratively Matched Boundary Method, J. Sound Vibr., 284: 487-493.
8.
Zhao, S. and Wei, G.W. (2003). Comparison of the Discrete Singular Convolution and Three Other Numerical Schemes for Solving Fisher's Equation, SIAM J. Sci. Comput., 25: 127-147.
9.
Wei, G.W. (2001). A New Algorithm for Solving Some Mechanical Problems, Comput. Methods Appl. Mech. Eng. , 190: 2017-2030.
10.
Wei, G.W. (2001). Vibration Analysis by Discrete Singular Convolution, J. Sound Vibration, 244: 535-553.
Wei, G.W. , Zhao, Y.B. and Xiang, Y. (2002). Discrete Singular Convolution and its Application to the Analysis of Plates With Internal Supports. Part 1: Theory and Algorithm, Int. J. Numer Methods Eng., 55: 913-946.
13.
Wei, G.W. , Zhao, Y.B. and Xiang, Y. (2002). A Novel Approach for the Analysis of High-Frequency Vibrations, J. Sound Vibration , 257(2): 207-246.
14.
Zhao, Y.B., Wei, G.W. and Xiang, Y. (2002). Discrete Singular Convolution for the Prediction of High Frequency Vibration of Plates, Int. J. Solids Struct. , 39: 65-88.
15.
Wei, G.W. , Zhao Y.B. and Xiang, Y. (2001). The Determination of Natural Frequencies of Rectangular Plates With Mixed Boundary Conditions by Discrete Singular Convolution, Int. J. Mechanical Sciences , 43: 1731-1746.
16.
Lim, C.W. , Li, Z.R., Xiang , Y., Wei , G.W. and Wang, C.M. (2005). On the Missing Modes when Using the Exact Frequency Relationship between Kirchhoff and Mindlin Plates, Advances in Vib. Eng., 4: 221-248.
17.
Lim, C.W. , Li, Z.R. and Wei , G.W. (2005). DSC-Ritz Method for High-Mode Frequency Analysis of Thick Shallow Shells, Int. J. Numer. Methods Eng., 62: 205-232.
18.
Hou, Y. , Wei, G.W. and Xiang, Y. (2005). DSC-Ritz Method for the Free Vibration Analysis of Mindlin Plates, Int. J. Numerical Meth. Engng., 62: 262-288.
19.
Civalek, Ö. (2006). An Efficient Method for Free Vibration Analysis of Rotating Truncated Conical Shells, Int. J. Pressure Vessels Piping, 83: 1-12.
20.
Civalek, Ö. (2006). The Determination of Frequencies of Laminated Conical Shells via the Discrete Singular Convolution Method, Journal of Mechanics of Materials and Structures, 1(1): 165-192.
21.
Civalek, Ö. (2006). Free Vibration Analysis of Composite Conical Shells Using the Discrete Singular Convolution Algorithm , Steel and Composite Structures, 6(4): 353-366.
22.
Civalek, Ö. (2007). Frequency Analysis of Isotropic Conical Shells by Discrete Singular Convolution (DSC), Int. J. Structural Eng. Mech., 25(1): 127-131.
23.
Civalek, Ö. (2007). Three-Dimensional Vibration, Buckling and Bending Analyses of Thick Rectangular Plates Based on Discrete Singular Convolution Method, Int. J. Mech. Sciences, 49: 752-765.
24.
Bert, C.W. and Francis, P.H. (1974). Composite Material Mechanics: Structural Mechanics , AIAA Journal, 12(9): 1173-1186.
25.
Reddy, J.N. (1997). Mechanics of Laminated Composite Plates: Theory and Analysis, CRC Press.
26.
Reddy, J.N. (1984). A Simple Higher-order Theory for Laminated Composite Plates, ASME, Journal of Applied Mechanics , 51: 745-752.
27.
Noor, A.K. (1973). Free Vibrations of Multilayered Composite Plates , AIAA Journal, 11: 1038-1039.
28.
Whitney, J.M. and Leissa, A.W. (1970). Analysis of Simply Supported Laminated Anisotropic Rectangular Plate, AIAA Journal , 8(1): 28-33.
29.
Reissner, E. (1972). A Consistent Treatment of Transverse Shear Deformations in Laminated Anisotropic Plates, AIAA Journal, 10(5): 716-718.
30.
Qatu, M.S. (2004). Vibration of Laminated Shells and Plates, Elsevier Academic Press, Netherlands.
31.
Pagano, N.J. (1970). Exact Solutions for Rectangular Bidirectional Composite and Sandwich Plates, J. Composite Materials, 4: 20-34.
Liu, P., Zhang, Y.W. and Zhang, K.D. (1994). Bending Solution of High-Order Shear Deformation Theory for Rectangular Composite Plates, Int. J. Solids Structures , 31: 2491-2507.
34.
Liew, K.M., Han, J.-B. and Xiao, Z.M. (1996). Differential Quadrature Method for Thick Symmetric Cross-Ply Laminates with First-Order Shear Flexibility, Int. Journal of Solids and Structures, 33(18): 2647-2658.
35.
Srinivas, A. , Rao, A.K. and Rao, C.V. (1969). Flexure of Simply Supported Thick Homogeneous and Laminated Rectangular Plates, ZAMM, 49: 449-458.
36.
Ferreira, A.J.M. , Roque, C.M.C. and Martins , P.A.L.S. (2003). Analysis of Composite Plates Using Higher-Order Shear Deformation Theory and Finite Point Formulation Based on the Multiquadratic Radial Basis Function Method, Composites Part B: Engineering, 34: 627-636.
37.
Reddy, J.N. and Chao, W. (1981). A Comparison of Closed-Form and Finite Element Solutions of Thick, Laminated Anisotropic Rectangular Plates, Nuclear Engineering and Design, 64: 153-167.
38.
Ferreira, A.J.M. , Roque, C.M.C. and Martins , P.A.L.S. (2004). Radial Basis Functions and Higher-order Shear Deformation Theories in the Analysis of Laminated Composite Beams and Plates, Composite Structures, 66: 287-293.
39.
Ferreira, A.J.M. , Roque, C.M.C. and Jorge, R.M.N. (2005). Analysis of Composite Plates by Trigonometric Shear Deformation Theory and Multiquadratics, Computers and Structures, 83: 2237-2257.
40.
Reddy, J.N. (1993). An Introduction to the Finite Element Method, McGraw-Hill, New York.
41.
Reddy, J.N. (1984). Energy and Variational Methods in Applied Mechanics , Wiley, New York.
42.
Ferreira, A.J.M. , Roque, Jorge, R.M.N. and Kansa, E.J. (2005). Static Deformations and Vibration Analysis of Composite and Sandwich Plates Using a Layerwise Theory and Multiquadrics Discretizations, Engineering Analysis with Boundary Elements, 29: 1104-1114.
43.
Ferreira, A.J.M. and Fasshauer, G.E. (2007). Analysis of Natural Frequencies of Composite Plates by an RBF-pseudospectral Method , Composite Structures, 79(2): 202-210.
44.
Ferreira, A.J.M. (2004). Polyharmonic (Thin-plate) Splines in the Analysis of Composite Plates, Int. J. Mechanical Sciences, 46: 1549-1569.
45.
Qatu, M.S. and Algothani, A. (1994). Bending Analysis of Laminated Plates and Shells by Different Methods, Computers and Structures, 52(3): 529-539.
46.
Qatu, M.S. (2004). Vibration of Homogeneous and Composite Thick Barrel Shells, J. Vib. Cont., 10(3): 319-341.
47.
Qatu, M.S. (1991). Free-Vibration of Laminated Composite Rectangular-Plates , Int. J. Solids Structures, 28(8): 941-954.
48.
Xiao, J.R., Batra, R.C., Gilhooley, D.F., Gillespie Jr., J.W. and McCarthy, M.A. (2007). Analysis of Thick Plates by Using a Higher-order Shear and Normal Deformable Plate Theory and MLPG Method With Radial Basis Functions, Comp. Meth. Applied Mechanics Engineering, 196(4-6): 979-987.
49.
Gilhooley, D.F., Batra, R.C., Xiao , J.R., McCarthy, M.A. and Gillespie Jr., J.W. (2007 ). Analysis of Thick Functionally Graded Plates by Using Higher-Order Shear and Normal Deformable Plate Theory and MLPG Method with Radial Basis Functions , Composite Structures, 80(4): 539-552.
50.
Zhang, L., Xiang Y. and Wei, G.W. (2006). Local Adaptive Differential Quadrature for Free Vibration Analysis of Cylindrical Shells with Various Boundary Conditions , Int. J. Mech. Sciences, 48: 1126-1138.
51.
Yu, S.N. , Xiang, Y. and Wei , G.W. (2008). Matched Interface and Boundary (MIB) Method for the Vibration Analysis of Plates (in press), Commun. Numer. Methods Engng, DOI: 10.1002/cnm.1130.
52.
Zhou, Y.C. and Wei, G.W. (2006). On the Fictitious-Domain and Interpolation Formulations of the Matched Interface and Boundary (MIB) Method, J. Comput. Phys., 219: 228-246.
53.
Zhao, Y.B., Wei, G.W. and Xiang, Y. (2002). Plate Vibration Under Irregular Internal Supports , Int. J. Solids Struct., 39: 1361-1383.
54.
Xiang, Y., Zhao, Y.B. and Wei, G.W. (2002). Discrete Singular Convolution and its Application to the Analysis of Plates with Internal Supports. Part 2: Applications, Int. J. Numer. Methods Eng., 55: 947-971.
55.
Wei, G.W. (2000). Wavelets Generated by Using Discrete Singular Convolution Kernels, J. Phys. A: Math. Gen. , 33: 8577-8596.
