Constant stress amplitude cyclic tests were conducted on monolithic Mg and Mg reinforced with 0.5, 1, and 2vol% of nano-size Y2O 3. The cyclic life of the monolithic Mg and its nanocomposites were found to be comparable at the three stress amplitudes tested. Hardening behavior is observed throughout the whole fatigue life of all the specimens tested. Forest dislocations observed in Mg and Mg nanocomposites are responsible for the cyclic hardening. Addition of nanoparticles provides additional strengthening sources that cause the Mg—Y2O3 nanocomposites to harden more intensely that monolithic Mg.
Shih, T.S., Liu, W.S. and Chen, Y.J. (2002). Fatigue of as-extruded AZ61A Mg Alloy, Mater. Sci. and Eng. A, 325: 152-162.
2.
Ogarevic, V.V. and Stephens, R.I. (1990). Fatigue of Mg Alloys , Annual Rev. of Mater. Sci., 20: 141-177.
3.
Sonsino, C.M. and Dieterich, K. (2005). Fatigue Design with Cast Mg Alloys under Constant and Variable Amplitude Loading, Int. J. Fatigue, 28: 183-193.
4.
Sajuri, Z.B. , Miyashita, Y., Hosokai , Y. and Mutoh, Y. (2006). Effects of Mn Content and Texture on Fatigue Properties of as-cast and Extruded AZ61 Mg Alloys, Int. J. Mech. Sci., 48: 198-209.
5.
Uematsu, Y., Tokaji, K., Kamakura, M., Uchida, K., Shibata, H. and Bekku, N. (2006). Effect of Extrusion Conditions on Grain Refinement and Fatigue behaviour in Mg Alloys, Mater. Sci. and Eng. A , 434: 131-140.
6.
Yang, Y., Liu, Y.B., Qin, S.Y. and Fang, Y. (2006). High Cycle Fatigue Properties of Die-cast Mg Alloy AZ91D with Addition of Different Concentrations of Cerium, J. Rare Earths, 24: 591-595.
7.
Srivatsan, T.S. , Al-Hajri, M. and Lam , P.C. (2005). The Quasi-static, Cyclic Fatigue and Final Fracture behaviour of a Mg Alloy Metal-matrix Composite, Comp. Part B: Engineering, 36: 209-222.
8.
Vaidya, A.R. and Lewandowski, J.J. (1996). Effects of SiCp Size and Volume Fraction on the High Cycle Fatigue behaviour of AZ91D Mg Alloy Composites, Mater. Sci. and Eng. A, 220: 85-92.
9.
Kwadjo, R. and Brown, L.M. (1978). Cyclic Hardening of Mg Single Crystals, Acta Metall., 26: 1117-1132.
10.
Goh, C.S. , Wei, J., Lee , L.C. and Gupta, M. (2006). Simultaneous Enhancement in Strength and Ductility by Reinforcing Mg with Carbon Nanotubes, Mater. Sci. and Eng. A, 423: 153-156.
11.
Goh, C.S. , Wei, J., Lee , L.C. and Gupta, M. (2007). Properties and Deformation behaviour of Mg-Y2O3 Nanocomposites, Acta Mater., 55: 5115-5121.
12.
Suresh, S., Mortensen, A. and Needleman, A. (1993). Fundamentals of Metal Matrix Composites. Butterworth-Heinemann, Stoneham.
13.
Bonnen, J.J. , Allison, J.E. and Jones, J.W. (1991). Fatigue behaviour of a 2XXX Series Al Alloy Reinforced with 15 vol.% SiCp , Metall. Trans. A, 22: 1007-1019.
14.
Llorca, J., Suresh, S. and Needleman, A. (1992). An Experimental and Numerical Study of Cyclic Deformation in Metal Matrix Composites, Metall. Trans. A, 23: 919-934.
15.
Koike, J., Kobayashi, T., Mukai, T., Watanabe, H., Suzuki, M., Maruyama, K. and Higashi, K. (2003). The Activity of Non-basal Slip Systems and Dynamic Recovery at Room Temperature in Fine-grained AZ31B Mg Alloys, Acta Mater., 51: 2055-2065.
16.
Petrenec, M. , Polak, J., Obrtlík , K. and Man , J. (2006). Dislocation Structures in Cyclically Strained X10CrAl24 Ferritic Steel, Acta Mater. , 54: 3429-3443.
