A method based on micro attenuated total reflection (ATR) Fourier transform infrared spectroscopy (FTIR) is described to quantify inhomogeneity of plastic components in carbon fiber reinforced plastic material (CFRP). The investigated CFRPs contain an epoxy resin and a thermoplastic. Measurements on ground specimens at an inclined plane through the material allow the determination of the polymer distribution with a resolution of one micron regarding the depth. Three commercially available CFRPs (M18-1/G939, 8552/IM7, RTM 6) are characterized providing information on mechanical and thermal properties.
Wang, F.C.-Y. (1999). Polymer Analysis by Pyrolysis Gas Chromatography , Journal of Chromatography A, 843: 413-423.
2.
Varley, R.J. and Hodkin, J.H. (1997). Effect of Reinforcing Fibers on the Morphology of a Toughening Epoxy/Amine System, Polymer, 38: 1005-1009.
3.
Varley, R.J., Heath, G.R., Hawthorne, D.G., Hodkin, J.H. and Simon, G.P. (1995). Toughening of a Trifunctional Epoxy System: 1. Near Infrared Spectroscopy Study of Homopolymer Cure, Polymer , 36: 1347-1355.
4.
Akay, M. and Cracknell, J.G. (1994). Epoxy-Resin Polyethersulfone Blends, J. Appl. Polym. Sci., 52(5): 663-688.
5.
Bucknall, C.B. and Partridge, I.K. (1983). Phase Separation in Epoxy Resins Containing Polyethersulphone, Polymer, 24: 639-644.
6.
Houston, J. and Lane, J.M. (1992). Structure Development via Reaction Induced Phase Separation, Polymer, 33: 1379-1385.
7.
Hesse, M., Meier, H. and Zeeh, B. (1991). Spectroscopic Methods in Organic Chemistry, Thieme, Stuttgart, New York .
8.
Dao, B., Hodkin, J., Krstina, J., Mardel, J. and Tian, W. (2007). Accelerated Aging Versus Realistic Aging in Aerospace Composite Materials, III The Chemistry of Thermal Aging in Bismaleimide Composites , J. Appl. Polym. Sci., 105: 2062-2072.
9.
Dao, B., Hodkin, J., Krstina, J., Mardel, J. and Tian, W. (2006). Accelerated Aging Versus Realistic Aging in Aerospace Composite Materials, II Chemistry of Thermal Aging in a Structural Composite , J. Appl. Polym. Sci., 102: 3221-3232.
10.
Bondzic, S. , Hodkin, J., Krstina, J. and Mardel, J. (2005). Chemistry of Thermal Aging in Aerospace Epoxy Composites, J. Appl. Polym. Sci. , 100: 2210-2219.
11.
Tsotis, T.K. and Lee, S.M. (1988). Accelerated Aging versus Realistic Aging in Aerospace Composites, Compos. Sci. Technol. , 58: 355-368.
12.
Ng, S.J., Cramer, R.J. and Mehrkem, P.A. (1997). Characterization of IM7/8552 Polymer Composites Subjected to Heat Damage, Composites for the Real World, Proc. of the 29th International SAMPE Technical Conference, Orlando, FL, pp. 776-786.
13.
Musto, P., Ragosta, G., Russo, P. and Mascia, L. (2001). Thermal-Oxidative Degradation of Epoxy and Epoxy-Bismaleimide Networks: Kinetics and Mechanism, Macromol. Chem. Phys., 202: 3445-3458.
14.
Pigneri, A.M. , Galoci, E.C., Jackson, R.J. and Young, G.C. (1987). Probing the Molecular Interactions in the Diffusion of Water Through Epoxy and Epoxy/bismaleimide Networks, Int. SAMPE Electron. Conf, Santa Clara, CA, USA, 1: 657-663.
15.
Woo, E.M. , Chen, L.B. and Seferis, J.C. (1987). Characterization of Epoxy-Bismaleimide Network Matrices, J. Mater. Sci., 22: 3665-3671.
16.
Technical data: www.brukeroptics.com
17.
Sharma, N. and Ray, B.C. (2007). Assessment of Small Interactions and Structural Gradient at the Interface of Glass and Carbon Fiber Epoxy and Micro Composites by FTIR Imaging and DSC Techniques, Proceedings of the Conference on Emerging Trends in Engineering Materials., Thapar Institute of Engineering & Technology, Patiala-147004 (Punjab), India.
18.
Kazarian, S.G. , Chan, K.L.A., Maquet, V. and Boccaccini, A. (2004). Characterization of Bioactive and Resorbable Polylactide/Bioglass Composites by FTIR Spectroscopic Imaging , Biomaterials, 25(18): 3931-3938.
19.
Inoue, T., Chiba, T. and Kim, B.S. (1993). A New Time-Temperature-Transformation Cure Diagram for Thermoset/Thermoplastic Blend: Tetrafunctional Epoxy/Poly(Ether Sulfone) , Polymer, 34: 2809-2815.
20.
Inoue, T., Chiba, T. and Kim, B.S. (1995). Morphology Development via Reaction-Induced Phase-Separation in Epoxy Poly(Ether Sulfone) Blends - Morphology Control Using Poly(Ether Sulfone) with Functional End-Groups, Polymer, 36: 43-47.
21.
McKinnon, A.J. , Jenkins, S.D., MsGrail, P.T. and Pethrik, R.A. (1992). A Dielectric, Mechanical , Rheological, and Electron Microscopy Study of Cure and Properties of a Thermoplastic-Modified Epoxy Resin, Macromolecules, 25: 3492-3499.
22.
Drake, R. (1990). Toughening Epoxy based Resin Systems, Polymeric Materials Science and Engineering, Washington - American Chemical Society, 63: 802.
23.
Hayes, B.S. and Seferis, J.C. (2001). Modification of Thermosetting Resins and Composites Through Preformed Polymer Particles: A Review, Polymer Composites , 22(4): 451-467.
24.
Hoistington, M.A., Seferis, J.C. and Schaffnit, R.S. (1990). Prepreg Toughening Concepts for High Performance Composites, Advanced Materials: Looking Ahead to the 21st Century, Boston, Massachusetts, USA, pp. 446-454.
25.
Hoistington, M.A. and Seferis, J.C. (1993). Model Multilayer Structured Composites, SAMPE Quarterly, 24(2): 10-20.
26.
Nguyen, L.D., Lowry, M.A., Stone, D.L. and Underwood, J.A. (1995). US 5434226, Epoxy Resin Toughened with a Polyethersulfone and Polyarylsulfidesulfone.
27.
Bascom, W.D., Gweon, S.-Y. and Grande, D. (1993). In: Riew, C.K., Kinloch, A.J. (eds), Toughened Plastics I , p. 519, American Chemical Society, Washington, DC.
28.
Odagiri, N., Muraki, T. and Tobukuro, K. (1988). Toughness Improved High Performance Torayca Prepreg T800H/3900 Series, 33rd International SAMPE Symposium, Materials-Pathway to the Future; Anaheim, California, 33: 272-283.
29.
Odagiri, N., Suzue, S., Kishi, H., Nakae, T. and Matsusaki, A. (1988). EP 0274899, Highly Tough Composites.
30.
Odagiri, N., Suzue, S., Kishi, H., Nakae, T. and Matsusaki, A. (1998). US 5789073, Fiber Reinforced Composite Materials .
31.
Mortaigne, B. and Regnier, N. (2000). Study of Epoxy and Epoxy-cyanate Networks Thermal Degradation to Predict Materials Lifetime in Use Conditions , J. Appl. Pol. Sci., 77: 3142-3153.
32.
Lee, S.-H. , Nam, J.-D., Ahn, K., Chung, K.-M. and Seferis, J.C. (2001). Thermo-Oxidative Stability of High Performance Composites under Thermal Cycling Conditions, J. Comp. Mat., 35: 433-454.
33.
Nam, J.-D. and Seferis, J.C. (1992). Anisotropic Thermo-Oxidative Stability of Carbon Fiber Reinforced Polymeric Composites, SAMPE Quarterly, 24(1): 10-18.
34.
Bowles, K.J. and Nowak, G. (1988). Thermo-Oxidative Stability Studies of Celion 6000/PMR-15 Unidirectional Composites, PMR-15, and Celion 6000 Fiber, J. Comp. Mat., 22: 966-985.
35.
Potteer, B.D. , Yuan, F.G. and Pater, R.H. (1993). The Effect of Molecular Weight on Transverse Microcracking in High-Temperature LaRC-RP46T Polyimide Composites, J. Advanced Materials, 25(1): 30-34.
36.
Colin, X., Marais, J. and Verdu, J. (2001). Thermal Oxidation Kinetics for a Poly(bismaleimide) , J. Appl. Polym. Sci., 82: 3418-3430.
37.
Wolfrum, J., Eibl, S. and Lietch, L. (2008). Rapid Evaluation of Long Term Thermal Degradation of Thermoplastic Toughened Carbon Fibre Epoxy Composites, to be published.
38.
Odagiri, N., Kishi, H. and Nakae, T. (1991). T800H/3900-2 Toughened Epoxy Prepreg System: Toughening Concept and Mechanism, Proc. of the American Society for Composites. Sixth Technical Conference. Composite Materials, Mechanics and Processing, Albany, New York, USA, pp. 43-52.
39.
Hummel, O. and Scholl, F. (1984). Infrared Analysis of Polymers, Resins and Additives, an Atlas, Vol. 2, Verlag Chemie , Weinheim.
40.
Tillman, M.S. , Hayes, B.S. and Seferis, J.C. (2001). Analysis of Polymeric Composite Interphase Regions with Thermal Atomic Force Microscopy, J. Appl. Pol. Sci., 80: 1643-1649.
41.
Flemming, M. and Roth, S. (2003). Faserverbundbauweisen, Eigenschaften, Springer, Berlin, Heidelberg , New York.
42.
May, C.A. (1988). Epoxy Resins, Chemistry and Technology, 2nd edn. Marcel Dekker, New York, Basel.
43.
Bonnaud, L., Pascault, J.P., Sautereau, H., Zhao, J.Q. and Jia, D.M. (2004). Use of Reactive Polyetherimide to Modify Epoxy Thermosets. I. Synthesis of an Amino-grafted Polyetherimide, European Polymer Journal, 40(11): 2637-2643.
