Using the Climbing Drum Peel (CDP) Test to Obtain a G IC Value for Core/Face Sheet Bonds

Abstract

A method of measuring the mode I (peeling) fracture toughness of core/face sheet bonds in sandwich structures is desired, particularly with the widespread use of models that need this data as input. This study examined if a mode I critical strain energy release rate, G_IC, can be obtained from the climbing drum peel (CDP) test. The CDP test is relatively simple to perform and does not rely on measuring small crack lengths such as required by the more commonly used double cantilever beam (DCB) test. Simple energy methods were used to calculate G_IC from CDP test data on composite face sheets bonded to a honeycomb core. Face sheet thicknesses from 2 to 5 plies (0.51—1.27 mm) were tested to examine the upper and lower bounds on face sheet thickness requirements. Suggestions on conducting the test and on modifying the CDP apparatus to test composite face sheets (as opposed to metallic) are also presented. Results from the study suggest that the CDP test, with certain provisions, can be used to find the G_IC value of a core/face sheet bond.

Keywords

honeycomb fracture toughness mode I delamination double cantilever beam climbing drum peel.

Get full access to this article

View all access options for this article.

References

Goetz, R.C. , Ryan, R.S. and Whitaker, A.F. (2000). Final Report of the X-33 Liquid Hydrogen Tank Investigation Team, NASA, Marshall Space Flight Center , May 2000.

American Society for Testing and Materials ( 2006). Standard Test Method for Climbing Drum Peel for Adhesives, ASTM Standard D1781-98, In: ASTM Annual Book of Standards, Vol. 15.06, ASTM .

American Society for Testing and Materials ( 2006). Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites, ASTM Standard D5528-01, In: ASTM Annual Book of Standards, Vol. 15.03, ASTM .

Okada, R. and Kortschot, M.T. (2001). The Role of the Resin Fillet in the Delamination of Honeycomb Sandwich Structures, Composites Science and Technology , 62: 1811—1819 .

Liechti, K.M. and Martin, B. (2002). Delamination of a High-Temperature Sandwich Plate , Experimental Mechanics, 42: 206—213 .

Ural, A. , Zehnder, A.T. and Ingreffea, A.R. (2003). Fracture Mechanics Approach to Facesheet Delamination in Honeycomb: Measurement of Energy Release Rate of the Adhesive Bond, Engineering Fracture Mechanics, 70: 93—103 .

Berkowitz, C.K. and Johnson, W.S. (2005). Fracture and Fatigue Tests and Analysis of Composite Sandwich Structure, Journal of Composite Materials, 39: 1417—1431 .

Shivakumar, K.N. and Smith, S.A. (2004). In Situ Fracture Toughness Testing of Core Materials in Sandwich Panels, Journal of Composite Materials, 38: 655—668 .

Ratcliffe, J. and Cantwell, W.J. (2000). A New Test Geometry for Characterizing Skin-Core Adhesion in Thin-Skinned Sandwich Structures , Journal of Materials Science Letters, 19: 1365—1367 .

10.

Gates, T.S. and Herring, H.M. (2001). Facesheet Push-off Tests to Determine Composite Sandwich Toughness at Cryogenic Temperatures , AIAA-2001-1219, Proceedings, AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, 42nd, Seattle, WA, April 16—19, 2001.

11.

Cantwell, W.J. and Davies, P. (1994). A Test Technique for Assessing Core-Skin Adhesion in Composite Sandwich Structures , Journal of Material Science Letters, 13: 203—205 .

12.

Cantwell, W.J. , Scudamore, R. , Ratcliffe, J. and Davies, P. (1999). Interfacial Fracture in Sandwich Laminates, Composites Science and Technology, 59: 2079—2085 .