In the present study, Nanomer® I-28E, organically modified montmorillonite nanoclay supplied by Nanocor Inc., was used to modify SC-15, a toughened epoxy system using sonication route. Different weight percentage ranging from 1—3% of nanoclay was used. The modified epoxy was then used to fabricate 15-layer plain weave carbon/epoxy composite laminates using a vacuum assisted resin transfer molding (VARTM) method. Samples of size 100 × 100 mm were cut from the laminates and were subjected to low-velocity impact loading using an instrumented drop-weight system (Dynatup Model 8210) at three different energy levels of 10, 20 and 30 J. Transient response of the samples was recorded and analyzed in terms to load-energy vs time relations. Impact damage was characterized by utilizing an ultrasonic nondestructive evaluation system (c-scan). Results of the study indicate that the infusion of nanoclay in the system reduced the impact damage though the impact response in terms of the peak load remained mostly unaltered. Reduced damage size was attributed to increased stiffness and resistance to damage progression of the nanophased laminates.
Reynaud, E., Gauthier, C. and Perez, J. (1999). Nanophases in Polymers, Review Metallurgie, 96(2): 169—176.
2.
Chun, L.W., Ming, Q.Z., Min, Z.R. and Klaus, F. (2002). Tensile Performance Improvement of Low Nanoparticles Filled-Polypropylene Composites, CompositesScience and Technology , 62: 1327—1340.
3.
LeBaron, P.C. , Wang, Z. and Pinnavaia, T.J. (1999). Polymer Layered Silicate Nanocomposites: An Overview, AppliedClay Science, 15: 11—29.
4.
Fukushima, Y. and Inagaki, S. (1987). Synthesis of an Intercalated Compound of Montmorillonite and 6-Polyamide, Journal of Inclusion Phenomena, 5: 473—482.
5.
Kojima, Y., Fukumori, K., Usuki, A., Okada, A. and Kurachi, T. (1993). Gas Permeabilities in Rubber Clay Hybrid, Journal of Material Science Letters, 12: 889—890.
6.
Lee, A. and Lichtenhan, J.D. (1999). Thermal and Viscoelastic Property of Epoxy Clay and Hybrid Inorganic—Organic Epoxy Nanocomposites, Journal of AppliedPolymer Science, 73: 1993—2001.
7.
Gilman, J.W. and Kashiwagi, T. (2000). Polymer-layered Silicate Nanocomposites with Conventional Flame Retardants. In: Beall G.W., Pinnavaia, T.J. (eds), Polymer-Clay Nanocomposites , Wiley, New York.
8.
Alexandre, M. and Dubios, P. (2000). Polymer Layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials , Materials Science and Engineering, 28: 1—63.
9.
Hussain, M., Nakahira, A. and Niihara, K. (1996). Mechanical Property Improvement of Carbon Fiber Reinforced Epoxy Composites by Al2O3 Filler Dispersion , Materials Letters, 26: 185—191.
10.
Hayes, B.S., Nobelen, M., Dharia, A.K. and Seferis, J.C. (2001). Development and Analysis of Nanoparticle Modified Prepreg Matrices, 33rd International SAMPE Symposium and Exhibition, Seattle, WA.
11.
Timmerman, J.F. , Hayes, B. and Seferis J.C. (2002). Nanoclay Reinforcement Effects on the Cryogenic Micro Cracking of Carbon Fiber/Epoxy Composites, CompositesScience and Technology, 62: 1249—1258.
12.
Gopakumar, T.G. , Lee, J.A., Kontopoulou, M. and Parent, J.S. (2002). Influence of Clay Exfoliation on the Physical Properties of Montmorillonite/Polyethylene Composites, Polymer, 43: 5483—5491.
13.
Okada, A., Kojima, Y., Kawasumi, M., Fukushima, Y., Kuauchi, T. and Kamigaito, O. (1993). Synthesis of Nylon 6-Clay Hybrid, J. Mater. Res., 8(5): 1179—1184.
14.
Akelah, A. and Moet, A. (1994). Synthesis of Organophilic Polymer-clay Nanocomposites , Journal of Applied Polymer Science: Applied Polymer Symposium , 55: 153—172.
15.
Liu, W., Hoa, S.V. and Pugh, M. (2005). Fracture Toughness and Water Uptake of High-performance Epoxy/Nanoclay Nanocomposites, CompositesScience and Technology , 65(15—16): 2364—2373.
16.
Yasmin, A., Abot, J.L. and Daniel, I.M. (2003). Processing of Clay/Epoxy Nanocomposites by Shear Mixing, Scripta Materialia, 49(1): 81—86.
Chowdhury, F.H., Hosur, M.V. and Jeelani, S. (2006). Studies on the Flexural and Thermomechanical Properties of Woven Carbon/Nanoclay-Epoxy Laminates, Material Science and Engineering: A, 421(1—2): 298—306.
21.
Abrate, S. (1991). Impact on Laminated Composite Materials, ASMEApplied Mechanics Review, 44(4): 155—190.
22.
Cantwell, W. and Morton, J. (1991). Impact Resistance of Composite Materials — A Review, Journal of Composites , 22: 347—362.
23.
Sjoblom, P.O. , Hartness, J.T. and Cordell, T.M. (1988). On Low-velocity Impact Testing of Composite Materials, Journal of Composite Materials , 22(1): 30—52.
24.
Harding, J. (1989). Impact damage in Composite Materials, Science and Engineering ofComposite Materials , 1: 41—68.
25.
Guild, F.J. , Hogg, P.J. and Prichard, J.C. (1993). A Model for the Reduction in Compressive Strength of Continuous Fiber Composites After Impact Damage , Composites, 24: 333—339.
26.
Hull, D. and Shi, Y.B. (1993). Damage Mechanisms Characterization in Composite Damage Tolerance Investigations, Composite Structures, 23: 99—120.
27.
Jones, R. and Baker, A.A. (1985). Composite Strength of Impact Damaged Graphite Epoxy Composites, Proceedings of the 3rd International Conference on Composite Structures, 402—414.
28.
Hosur, M.V. (1995). Studies on Damage and Residual Compressive Strength of Carbon Fiber Reinforced Plastic Laminates Subjected to Low-velocity Impact, PhD Thesis, Indian Institute of Science, Bangalore, India.
29.
Eskin, G.I. (2001). Broad Prospects for Commercial Application of the Ultrasonic (Cavitation) Melt Treatment of Light Alloys , Ultrasonic Sonochemistry, 8(3): 319—325.
30.
Hosur, M.V. , Abdullah, M. and Jeelani, S. (2005). Manufacturing and Low-velocity Impact Characterization of Foam Filled 3-D Integrated Core Sandwich Composites with Hybrid Face Sheets, Composite Structures, 69: 167—181.
31.
Hosur, M.V. , Adya, M., Alexander, J., Jeelani. S., Vaidya, U. and Mayer, A. (2003). Studies on Impact Damage Resistance of Affordable Stitched Woven Carbon/Epoxy Composite Laminates, Journal of Reinforced Plastics and Composites, 22: 927—952.
