Restricted accessResearch articleFirst published online 2007-08
A Silicone Treatment Compared to Traditional Natural Fiber Treatments: Effect on the Mechanical and Viscoelastic Properties of Jute—Vinylester Laminates
In this work vinylester—matrix composites reinforced with woven jute fabrics were investigated. The effect of a simple fiber treatment with silicone on the mechanical and viscoelastic response in comparison to traditional treatments was analyzed. Unless the composite with acetylated fibers, all composites exhibited higher values of rubbery storage modulus than the matrix. All treated fiber composites have similar damping capacities. Furthermore, silicone had a plasticizing effect on the vinylester matrix. The composites with washed fibers and with fibers treated with silicone exhibited slightly higher stiffness and strength values than other treated fiber composites. In addition to its experimental simplicity, the treatment with silicone also allowed us to obtain the composites with best combination of stiffness, strength, and toughness.
Ray, D. , Sarkar, B.K. , Das, D. and Rana, A.K. (2002). Dynamic Mechanical and Thermal Analysis of Vinylester—Resin—Matrix Composites Reinforced with Washed and Alkali-treated Jute Fibres , Comp. Sci. Tech., 62(7): 911—917 .
2.
Singh, B. , Gupta, M. and Verma, A. (2000). The Durability of Jute Fibre-reinforced Phenolic Composites , Comp. Sci. Tech., 60: 581—589 .
3.
Mwaikambo, L.Y. and Ansell, M.P. (2002). Chemical Modification of Hemp, Sisal, Jute, and Kapok Fibers by Alkalization , J. Appl. Polym. Sci.84: 2222—2234 .
4.
Dweib, M.A. , Hu, B. , O'Donnell, A. , Shenton, H.W. and Wool, R.P. (2004). All Natural Composite Sandwich Beams for Structural Applications , Composite Structures,63: 147—157 .
5.
Mehta, G. , Drzal, L.T. , Mohanty, A.K. and Misra, M. (2005). Effect of Fiber Surface Treatment on the Properties of Biocomposites from Nonwoven Industrial Hemp Fiber Mats and Unsaturated Polyester Resin , Journal of Applied Polymer Science, 99(2): 1055—1068 .
6.
Ray, D. , Sarkar, B.K. and Bose, N. (2002). Impact Fatigue Behavior of Vinylester Resin Matrix Composites Reinforced with Alkali Treated Jute Fibres , Composites Part A,33(2): 233—241 .
7.
George, J. , Sreekala, M.S. and Thomas, S. (2004). A Review on Interface Modification and Characterization of Natural Fiber Reinforced PlasticComposites, 41(9): 1471—1485 .
8.
Gassan, J. and Bledzki, A.K. (1999). Possibilities for Improving the Mechanical Properties of Jute/Epoxy Composites by Alkali Treatment of Fibres , Composite Science and Technology, 59(9): 1303—1309 .
9.
Plackett, D. and Vázquez, A. (2004). Biopolymers and Biocomposites, In: Baille, C. (ed.), Green Composites: Polymer Composites and the Environment, Chapter 5, Woodhead Publishers , ISBN 1-85573-739-6.
10.
Cyras, V.P. , Vallo, C. , Kenny, J.M. and Vazquez, A. (2004). Effect of Chemical Treatment on the Mechanical Properties of Starch-Based Blends Reinforced with Sisal Fibre , Journal of Composite Materials, 38(16): 1387—1399 .
11.
Mukherjee, A. , Ganguly, P.K. and Sur, D.J. (1993). J. Text. Inst., 84: 348 .
12.
Rong, M.Z. , Zhang, M.Q. , Lui, Y. , Yang, G.C. and Zeng, H.M. (2001). The Effect of Fiber Treatment on the Mechanical Properties of Unidirectional Sisal-Reinforced Epoxy Composites, CompositesScience and Technology, 61: 1437—1447 .
13.
Vázquez, A. , Dominguez, V. and Kenny, J.M. (1999). Bagasse-Fiber-Polypropylene based Composites , Journal of Thermoplastic Composite Materials , 12: 477—497 .
14.
Ray, D. , Sarkar, B.K. , Rana, A.K. and Bose, N.R. (2001). The Mechanical Properties of Vinylester Resin Matrix Composites Reinforced with Alkali-treated Jute Fibres , Composites Part A, 32(2): 119—127 .
15.
Bisanda, E.T.N. (2000). The Effect of Alkali Treatment on the Adhesion Characteristics of Sisal Fibres, AppliedComposite Materials, 7(5—6): 331—339 .
16.
Gassan, J. and Bledzki, A.K. (1999). Alkali Treatment of Jute Fibers: Relationship Between Structure and Mechanical Properties, Journal of AppliedPolymer Science, 71(4): 623—629 .
17.
Ray, D. and Sarkar, B.K. (2001). Characterization of Alkali-treated Jute Fibers for Physical and Mechanical Properties, Journal of AppliedPolymer Science, 80: 1013—1020 .
18.
Aziz, S.H. and Ansell, M.P. (2004). The Effect of Alkalization and Fibre Alignment on the Mechanical and Thermal Properties of Kenaf and Hemp Bast Fibre Composites: Part I— Polyester Resin Matrix, CompositesScience and Technology, 64(9): 1219—1230 .
19.
Van de Weyenberg, I. , Chi Troung, T. , Vangrimde, B. and Verpoest I. (2006). Improving the Properties of UD Flax Fibre Reinforced Composites by Applying an Alkaline Fibre Treatment , Composite Part A: Applied Science and Manufacturing, 37(9): 1368—1376 .
20.
Stana-Kleinscheck, K. , Strand, S. and Ribitsch, V. (1999). Surface Characterization and Absorption Abilities of Cellulose Fibers , Polymer Engineering and Science, 39(8): 1412—1423 .
21.
Bledzki, A.K. , Fink, H.-P. and Specht, K. (2004). Unidirectional Hemp and Flax EP- and PP-composites: Influence of Defined Fiber Treatment , Journal of Applied Polymer Science, 93: 2150—2156 .
22.
Zafeiropoulus, N.E. , William, D.R. , Baillie, C.A. and Matthew, F.L. (2002) Engineering and Characterization of the Interface in Flax Fiber/Polypropylene Composite Materials. Part A. Development and Investigation of Surface Treatments , Composites Part A, 33: 1083—1093 .
23.
Alvarez, A. , Ruseckaite, R.A. and Vázquez, A. (2004). Mechanical Properties and Water Absorption Behavior of Composites Made from a Biodegradable Matrix and Alkaline-Treated Sisal Fibers , Journal of Composite Materials, 37(17): 1575—1588 .
24.
ASTM Standard D 3039M—95a (1995). Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA .
25.
ASTM Standard D 790M—95a ( 1995). Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA.
26.
ASTM Standard D 2344M—84a (1984). Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA.
27.
Alvarez, V. , Rodriguez, E. and Vázquez, A. (2006). Thermal Degradation and Decomposition of Jute/Vinylester Composites , Journal of Thermal Analysis and Calorimetry,85(2): 383—389 .
28.
Sreekala, M.S. , Kumaran, M.G. and Thomas, S. (1997). Oil Palm Fibers — Morphology, Chemical-Composition, Surface Modification, and Mechanical-Properties , J. Appl. Polym. Science, 66(5): 821—835 .
29.
Pothan, L.A. and Thomas, S. (2003). Polarity parameters and Dynamic Mechanical Behaviour of Chemically Modified Banana Fiber Reinforced Polyester Composites , Composite Science and Technology, 63: 1231—1240 .
30.
Rodriguez, E. , Larrañaga, M. , Mondragón, I. and Vázquez, A. (2006). Relationship between Network Morphology and Properties of Commercial Vinyl-ester Resins , Journal of Applied Polymer Science, 100(5): 3895—3903 .
31.
Alvarez, V. and Vázquez, A. (2005). Influence of Fiber Chemical Modification Procedure on the Mechanical Properties and Water Absorption of MaterBi-Y/Sisal Fiber Composites , Composites: Part A,37: 1672—1680 .
32.
Botello, E.C. , Figiel, L. , Rezende, M.C. and Lauke, B. (2003). Mechanical Behavior of Carbon Fiber Reinforced Polyamide Composites , Composite Science and Technology, 63(13): 1843 .
