Paper is a composite of fibers, air and additives where the fiber/fiber joints keep the network structure together. A study was undertaken to establish the link between the properties of the contact zone between fibers and paper performance under mechanical loading. The contact zone between fibers was investigated using light microscopy. A staining technique was developed for evaluating the influence of surface charge on fiber/fiber joint strength. The joint strength was linearly correlated with paper tensile strength and with the average amplitude of the acoustic events measured by acoustic emission testing. The fiber surface conformability was improved by changing the surface charge. This resulted in increased fiber/fiber joint strength as the relative contact area became larger. Increasing the molecular adhesion in the contact zone with the aid of strength additives also improved the fiber/fiber joint strength.
Page, D.H. (1969). A Theory for the Tensile Strength of Paper, Tappi J., 52(4): 674—681.
2.
Torgnysdotter, A. and Wågberg, L. (2003). Study of the Joint Strength Between Regenerated Cellulose Fibres and its Influence on the Sheet Strength , Nordic Pulp Pap. Res. J., 18(4): 455—459.
3.
Broderick, G. , Paris, J., Valade, J. and Wood, J. (1996). Linking the Fibre Characteristics and Handsheet Properties of a High-yield Pulp, Tappi J., 79(1): 161—169.
4.
Emerton, H.W. (1957). Fundamentals of the Beating Process, British Paper and Board Industrial Research Asscociation, Kenley, UK, pp. 431—435.
5.
Laine, J. and Stenius, P. (1997). Effect of Charge on the Fibre and Paper Properties of Bleached Industrial Kraft Pulps, Pap. Puu., 79(4): 257—266.
6.
Grignon, J. and Scallan, A.M. (1980). Effect of pH and Neutral Salts upon the Swelling of Cellulose Gels, J. Appl. Polymer Sci., 25(12): 2829—2843.
7.
Lindström, T. (1986). In: Bristow, A. and Kolseth, P. (eds), Paper-Structure and Performance , Marcel Dekker Inc., New York, Basel, pp. 75, 99.
8.
Lindström, T. and Carlsson, G. (1978). The Effect of Chemical Environment on Fibre Swelling , EUCEPA Symposium, Warsaw, p. 32.
9.
Scallan, A.M. and Grignon, J. (1979). The Effects of Cations on Pulp and Paper Properties, Sven. Papperstidn., 82(2): 40—47.
10.
Torgnysdotter, A. and Wågberg, L. (2004). Influence of Electrostatic Interactions on Fibre/ Fibre Joint and Paper Strength, Nordic Pulp Pap. Res. J., 19(4): 440—447.
11.
Nazhad, M. and Paszner, L. (1994). Fundamentals of Strength Loss in Recycled Paper , Tappi J., 77(9): 171—179.
12.
Scallan, A.M. and Tigerström, A. (1992). Swelling and Elasticity of the Cell Walls of Pulp Fibres, J. Pulp Pap. Sci., 18(5): 188—193.
13.
Toven, K. (2003). Paper Properties and Swelling Properties of Ozone-based ECF Bleached Softwood Kraft Pulps, Tappi J., 2(2): 3—7.
14.
Wågberg, L. and Annergren, G. (1997). In: Baker, C.F. (ed.), Fundamentals of Papermaking Materials, Pira International , UK, ISBN 1 85802 209 6, pp. 1—82.
15.
Gradin, P.A., Nyström, S., Flink, P., Forsberg, S. and Stollmaier, F. (1997). Acoustic Emission Monitoring of Light-weight Coated Paper, J. Pulp Pap. Sci., 23(3): 113—118.
16.
Yamauchi, T., Okumura, S. and Murakami, K. (1988). Acoustic Emission During the Tensile Straining of Paper, Proceedings of the Cellucon 88, Kyoto , Japan, IS-Nr: 0-7458-0464-0.
17.
Yamauchi, T., Kumura, S. and Noguchi, M. (1990). Acoustic Emission as an Aid for Investigating the Deformation and Fracture of Paper, J. Pulp Pap. Sci., 16(2): 44—49.
18.
Belytschko, T., Liu, W.K. and Moran, B. (2000). Nonlinear Finite Elements for Continua and Structures , John Wiley and Sons Ltd., England.
Walecka, J.A. (1956). An Investigation of Low Degree of Substitution Carboxymethylcellulose, Tappi J., 39(7): 458—463.
21.
Katz, S., Beatson, R.P. and Scallan, A.M. (1984). The Determination of Strong and Weak Acidic Groups in Sulphite Pulps, Sven. Papperstidn., 87(6): 48—53.
22.
Wågberg, L., Winter, L. and Lindstöm, T. (1985). Papermaking Raw Materials, Transactions of the Eighth Fundamental Research Symposium held at Oxford, Mechanical Engineering Publications Ltd., London, p. 917.
23.
Winter, L., Wågberg, L., Ödberg, L. and Lindström, T. (1986). Polyelectrolytes Adsorbed on the Surface of Cellulosic Materials, J. Colloid Interface Sci., 111(2): 537—543.
24.
Karipidis, C. (1994). Bestämning av ett arks (skikts) optiska egenskaper med tvåbakgrundsmetoden, Licentiate thesis, KTH, Stockholm, Sweden.
25.
Fransson, P.-I., Karlsson, H. and Kastre, L. (1992). Patent, US 533 1405.
26.
Stratton, R.A. and Colson, N.L. (1990). Dependence of Fibre/Fibre Bonding on Some Paper Making Variables, Mat. Res. Soc. Symp. Proc., 197: 173—181.
27.
Hoppe, R., Alberti, G., Costantino, U., Dionigi, C., Schulz-Ekloff, G. and Vivani, R. (1997). Intercalation of Dyes in Layered Zirconium Phosphates. Part 1: Preparation and Spectroscopic Characterisation of Alfa-zirconium Phosphate Crystal Violet Compounds, Langmuir, 13(26): 7252—7257.
28.
Page, D.H., Tydeman, P.A. and Hunt, M. (1962). In: Bolam, F. (ed.), Formation and Structure of Paper, Technical Section, B.P. & B.M.A., London, pp. 171—193.
29.
Swerin, A., Ödberg, L. and Lindström, T. (1990). Deswelling of Hardwood Kraft Pulp Fibres by Cationic Polymers, Nordic Pulp Pap. Res. J., 5(4): 188—196.
30.
Wågberg, L. and Björklund, M. (1993). On the Mechanism Behind Wet Strength Development in Papers Containing Wet Strength Resins, Nordic Pulp Pap. Res. J., 8(1): 53—58.
31.
Lindström, T. , Kolseth, P. and Näslund, P. (1985). In: Punton, V. (ed.), Papermaking Raw Materials, Proceedings of the Conference Held at Oxford1985, Mechanical Engineering Publications, London, pp. 589—611.
