A Semi-analytical Method for Determining the Strain Energy Release Rate of Cracks in Adhesively-bonded Single-lap Composite Joints

Abstract

A semi-analytical method for determining the strain energy release rates due to a prescribed crack in an adhesively-bonded, single-lap composite joint subjected to axial tension is presented. The field equations in terms of displacements within the joint are formulated by using first-order shear deformable, laminated plate theory together with kinematic relations and force equilibrium conditions. The stress distributions for the adherends and adhesive are determined after the appropriate boundary and loading conditions are applied and the equations for the field displacements are solved. Based on the adhesive stress distributions, the forces at the crack tip are obtained and the strain energy release rates of the crack are determined by using the virtual crack closure technique (VCCT). Additionally, the test specimen geometry from both the ASTM D3165 and D1002 test standards are utilized during the derivation of the field equations in order to correlate analytical models with future test results. The system of second-order differential field equations is solved to provide the adherend and adhesive stress response using the symbolic computation tool, Maple 9. Finite element analyses using J-integral as well as VCCT were performed to verify the developed analytical model. The finite element analyses were conducted using the commercial finite element analysis software ABAQUS^TM. The results determined using the analytical method correlated well with the results from the finite element analyses.

Keywords

adhesively-bonded joint laminated plate theory composite joint strain energy release rate virtual crack closure technique (VCCT)fracture mechanics.

Get full access to this article

View all access options for this article.

References

Yang, C. , Tomblin, J.S. and Guan, Z. (2003). Analytical Modeling of ASTM Lap Shear Adhesive Specimens, Technical Report, DOT/FAA/AR-02/130, February.

Kutscha, D. (1964). Mechanics of Adhesive-bonded Lap-type Joints: Survey and Review, Technical Report AFML-TDR-64-298.

Kutscha, D. and Hofer, K.E., Jr. (1969). Feasibility of Joining Advanced Composite Flight Vehicles, Technical Report AFML-TR-68-391.

Matthews, F.L. , Kilty, P.F. and Goodwin, E.W. (1982). A Review of the Strength of Joints in Fibre-reinforced Plastics: Part 2 Adhesively Bonded Joints, Composites, 29.

Vinson, J.R. (1989). Adhesive Bonding of Polymer Composites, Polymer Engineering and Science, 29: 1325.

Yang, C. and Pang, S.S. (1996). Stress-Strain Analysis of Single-lap Composite Joints under Tension, ASME Transaction, Journal of Engineering Materials and Technology, 118: 247—255.

Huang, H. , Yang, C. , Tomblin, J.S. and Harter, P. (2002). Stress and Failure Analyses of Adhesive-bonded Composite Joints Using ASTM D3165 Specimens, ASTM Journal of Composites Technology & Research, 24(2): 345—356.

Yang, C. , Huang, H. , Tomblin, J.S. and Sun, W. (2004). Elastic-plastic Model of Adhesive-bonded Single-lap Composite Joints, Journal of Composite Materials, 38(4): 293—309.

Krueger, D. (2002). The Virtual Crack Closure Technique: History, Approach and Applications, Technical Report, NASA/CR-2002-211628, ICASE Report No. 2002-10, April.

10.

Schapery, R.A. and Davidson, B.D. (1990). Prediction of Energy Release Rate for Mixed-mode Delamination using Classical Plate Theory , Applied Mechanics Review, 43(5): Part 2.

11.

Davidson, B.D. (1995). Prediction of Energy Release Rate for Edge Delamination Using a Crack Tip Element Approach, Composite Materials: Fatigue, 5: 155—175.

12.

Davidson, B.D. , Hu, H. and Schapery, R.A. (1995). An Analytical Crack-tip Element for Layered Elastic Structures, Journal of Applied Mechanics, 62: 294—305.

13.

Davidson, B.D. , Yu, L. and Hu , H. (2000). Delamination of Energy Release Rate and Mode Mix in Three-dimensional Layered structures Using Plate Theory, International Journal of Fracture , 105: 81—104.

14.

Park, O. and Sankar, B.V. (2002). Crack-tip Force Method for Computing Energy Release Rate in Delaminated Plates, Composite Structures, 55: 429—434.

15.

Kim, I.-G. and Kong, C.-D. (2002). Generalized Theoretical Analysis Method for Free-edge Delaminations in Composite Laminates, Journal of Materials Science, 37: 1875—1880.

16.

Wang, J.T. , Xue, D.Y. , Sleight, D.W. and Housner, J.M. (1995). Computation of Energy Release Rate for Cracked Composite Panels with Nonlinear Deformation, AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference , No. 4, pp. 2713—2727.

17.

Wei, Y. , Yang, T. , Wan, Z. and Du, X. (2000). New VCCT and Its Application in Composite Delamination Analysis, Chinese Journal of Computational Mechanics, 17(3): 308—312.

18.

Camanho, P.P. , Dávila, C.G. and Pinho, S.T. (2004). Fracture Analysis of Composite Co-cured Structural Joints Using Decohesion Elements, Fatigue and Fracture of Engineering Materials and Structures, 27: 745—757.

19.

Strength Properties of Adhesives in Shear by Tension Loading of Single-lap-joint Laminated Assemblies, ASTM D3165-95.

20.

Standard Method of Test for Strength Properties of Adhesives in Shear by Tension Loadings (Metal-to-Metal), ASTM D1002-72.

21.

Maple 9 Advanced Programming Guide (2003). Materloo Maple Inc., Waterloo, Canada.

22.

ABAQUS/CAE User's Manual (Version 6.3) (2002 ). Hibbitt, Karlsson & Sorensen, Inc.

23.

ABAQUS/Standard User's Manual (Version 6.3) ( 2002). Hibbitt, Karlsson & Sorensen, Inc.

24.

Whitney, J.M. (1987). Structural Analysis of Laminated Anisotropic Plates, Technomic Publishing Company, Inc., Lancaster, PA.

25.

Rybicki, E.F. and Kanninen, M.F. (1977). A Finite Element Calculation of Stress Intensity Factors by a Modified Crack Closure Integral, Engineering Fracture Mechanics, 9: 931—938.

26.

Raju, I.S. (1987). Calculation of Strain-energy Release Rates With Higher Order and Singular Finite Elements, Engineering Fracture Mechanics, 28: 251—274.

27.

O'Brien, T.K. (1982). Characterization of Delamination Onset and Growth in a Composite Laminate, Damage in Composite Materials, ASTM STP 775, American Society for Testing and Materials, Philadelphia, PA, pp. 140—167.

28.

Anderson, T.L. (1995). Fracture Mechanics: Fundamentals and Applications , 2nd edn, CRC Press LLC, Boca Raton, FL.

29.

Barsoum, R.S. (1976). On the Use of Isoparametric Finite Elements in Linear Fracture Mechanics, International Journal for Numerical Methods in Engineering, 10: 25—37.

30.

Henshell, R.D. and Shaw, K.G. (1975). Crack Tip Finite Elements are Unnecessary, International Journal for Numerical Methods in Engineering, 9: 495—507.

31.

Raju, I.S. , Crews, Jr. J.H. and Aminpour, M.A. (1988). Convergence of Strain Energy Release Rate Components for Edge-delaminated Composite Laminates, Engineering Fracture Mechanics, 30(3): 383—396.