Sage Journals: Discover world-class research

Abstract

The main purpose of this study is to investigate the ballistic resistance behavior of basket 2 × 2 fabric aramid laminate composite materials experiencing oblique impact. The ballistic resistance performance at normal impact is discussed widely in most reports. However, the reports concerning ballistic resistance behavior at oblique impact are limited in metal material. The research of the oblique ballistic behavior of fabrics composites is rarely to be seen. The ballistic results show that the degree of ricochet of aramid laminates is greater than metal (>75^° or even more). The offset direction when a projectile perforates the laminate is converse with those of metal plates. Both sliding and embedding behaviors were found in the laminate after impact. So, the possibility that a basket weave causes a ricochet will be less than that of a plain weave.

Keywords

basket 2 × 2 aramid laminate oblique impact ballistic ricochet.

Get full access to this article

View all access options for this article.

References

Iremonger, M.J. and Went, A.C. (1966). Ballistic Impact of Fibre Composite Armors by Fragment-simulating Projectiles, Composites Part A, 27A: 575—581.

DeLuca, E. , Prifti, J. , Betheney, W. and Chou, S.C. (1998). Ballistic Impact Damage of 2-Glass-reinforced Plastic Structural Armor, Composites Science and Technology , 58(9): 1453—1461.

Gellert, E.P. , Cimpoeru, S.J. and Woodward, R.L. (2000). A Study of the Effect of Target thickness on the Ballistic Perforation of Glass-fibre-reinforced Plastic Composites, International Journal of Impact Engineering , 24(5): 445—456.

Morye, S.S. , Hine, P.J. , Duckett, R.A. , Carr, D.J. and Ward, I.M. (2000). Modelling of the Energy Absorption by Polymer Composites upon Ballistic Impact, Composites Science and Technology , 60(14): 2631—2642.

Yeh, V. ( 2000). The Key to Select Safety Protective Equipment, Protection Equipment International Seminar and TWNIJ Web Site Presentation, pp. 16—23.

Jourdan, P. , Volff, P. and Breteau, J. (1989). A Body Armor, What for?, In: 11th International Symposium on Ballistics, (III) Body Armour Related to Wound Ballistics Weapon Identification, BA-7/1-BA-1/10.

Chen, S.H. and Lee, K.C. (2000). The Study of Bullet-resisting Properties of Kevlar Fabric Lamination Form, Hwa Kang Textile Periodical, 7(3): 259—272.

Tao, Y.C. , Hsnig, W.H. and Lee, K.C. (2000). Impacts from Changed Bullet-resisting Fabric Construction on Bullet-resisting Performance, Hwa Kang Textile Periodical , 7(3): 259—272.

Chu, C.K. (1995). The Study of Impacts from Changed Fabric Construction on Bulletproof, a Master Thesis, Textile Engineering Institute, Feng Chia University, Taichung, pp. 8—9.

10.

MIL-STD-662F, USA. Department of Defense (1987). Military Standard: V50 Ballistic Test for Armor .

11.

Mil-P-46593A, Usa. Military Specification (1964). Projectile, Calibers .22, .30, .50 and 20 mm Fragment-stimulating.

12.

Hetherington, J.G. and Lemieux, P.F. (1994). The Effect of Obliquity on the Ballistic Performance of Two Component Composite Armors, International Journal of Impact Engineering, 15(2): 131—137.

The Study of Obliquity on the Ballistic Performance of Basket Fabric Composite Materials

Abstract

Keywords

Get full access to this article

References