The variation of permeability with the flow rate has been investigated. This variation is demonstrated by conducting specially designed experiments. The results show that permeability increases significantly as the flow rate increases. The implication of this observation is that the permeability measured under some given conditions is not always applicable to the actual molding situation. Furthermore, the permeability is not constant over both the space and time domains during the filling process. In order to take such dependence into account, a permeability model and an estimation technique for determining the coefficients of the model are proposed.
Shojaei, A. and Ghaffarian, S.R. (2003). Modeling and Simulation Approaches in the Resin Transfer Molding Process: A Review, Polymer Composites, 24(4): 525—544.
2.
Young, W.B., Rupel, K., Han, K., Lee, L.J. and Liou, M.J. (1991). Analysis of Resin Injection-molding in Molds with Preplaced Fiber Mats. 2. Numerical-simulation and Experiments of Mold Filling , Polymer Composites, 12(1): 30—38.
3.
Simacek, P. and Advani, S.G. (1996). Permeability Model for a Woven Fabric, Polymer Composites, 17(6): 887—899.
4.
Chan, A.W., Larive, D.E. and Morgan, R.J. (1993). Anisotropic Permeability of Fiber Preforms-Constant Flow-rate Measurement, Journal of Composite Materials, 27(10): 996—1008.
5.
Lai, Y.H., Khomami, B. and Kardos, J.L. (1997). Accurate Permeability Characterization of Preforms used in Polymer Matrix Composite Fabrication Processes, Polymer Composites, 18(3): 368—377.
6.
Parnas, R.S. , Flynn, K.M. and DalFavero , M.E. (1997). A Permeability Database for Composites Manufacturing, Polymer Composites, 18(5): 623—633.
7.
Shih, C.H. and Lee, L.J. (1998). Effect of Fiber Architecture on Permeability in Liquid Composite Molding, Polymer Composites, 19(5): 626—639.
8.
Simacek, P. and Advani, S.G. (2003). A Numerical Model to Predict Fiber Tow Saturation During Liquid Composite Molding, Composites Science and Technology , 63(12): 1725—1736.
9.
Pillai, K.M. (2004). Modeling the Unsaturated Flow in Liquid Composite Molding Processes: A Review and Some Thoughts, Journal of Composite Materials, 38(23): 2097—2118.
10.
Shojaei, A., Trochu, F., Ghaffarian, S.R., Karinian, S.M.H. and Lessard, L. (2004). An Experimental Study of Saturated and Unsaturated Permeabilities in Resin Transfer Molding Based on Unidirectional Flow Measurements , Journal of Reinforced Plastics & Composites, 23(14): 1515—1536.
11.
Binetruy, C. , Hilaire, B. and Pabiot, J. (1997). The Interactions between Flows Occurring Inside and Outside Fabric Tows during RTM, Composites Science and Technology, 57(5): 587—596.
12.
Lekakou, C. and Bader, M.G. (1998). Mathematical Modelling of Macro- and Micro-infiltration in Resin Transfer Moulding (RTM), Composites Part A — Applied Science and Manufacturing, 29(1—2): 29—37.
13.
Amico, S. and Lekakou, C. (2000). Mathematical Modelling of Capillary Micro-flow through Woven Fabrics, Composites Part A — Applied Science and Manufacturing, 31(12): 1331—1344.
14.
Breard, J., Henzel, Y., Trochu, F. and Gauvin, R. (2003). Analysis of Dynamic Flows through Porous Media. Part I: Comparison between Saturated and Unsaturated Flows in Fibrous Reinforcements , Polymer Composites, 24(3): 391—408.
15.
Dungan, F.D. and Sastry, A.M. (2002). Saturated and Unsaturated Polymer Flows: Microphenomena and Modeling, Journal of Composite Materials, 36(13): 1581—1603.
16.
Pillai, K.M. (2002). Governing Equations for Unsaturated Flow through Woven Fiber Mats. Part 1. Isothermal Flows, Composites Part A — Applied Science and Manufacturing, 33(7): 1007—1019.
17.
McBride, T.M. and Chen, J. (1997). Unit-cell Geometry in Plain-weave Fabrics During Shear Deformations, Composites Science and Technology, 57(3): 345—351.
18.
Breard, J., Saouab, A. and Bouquet, G. (2003). Numerical Simulation of Void Formation in LCM, Composites Part A — Applied Science and Manufacturing , 34(6): 517—523.
19.
Binetruy, C. , Hilaire, B. and Pabiot, J. (1998). Tow Impregnation Model and Void Formation Mechanisms During RTM, Journal of Composite Materials, 32(3): 223—245.
20.
Amico, S. and Lekakou, C. (2001). An Experimental Study of the Permeability and Capillary Pressure in Resin-transfer Moulding, Composites Science and Technology, 61(13): 1945—1959.
21.
Wildenschild, D., Hopmans, J.W. and Simunek, J. (2001). Flow Rate Dependence of Soil Hydraulic Characteristics, Soil Science Society of America Journal, 65(1): 35—48.
22.
Akin, S. and Demiral, M.R.B. (2001). Effect of Flow Rate on Imbibition Three-phase Permeabilities and Capillary Pressures, Energy Sources, 23(2): 127—135.
23.
Kim, S.K. and Daniel, I.M. (2003). Determination of Three-dimensional Permeability of Fiber Preforms by the Inverse Parameter Estimation Technique, Composites Part A - Applied Science and Manufacturing, 34(5): 421—429.
24.
Incropera, F.P. and DeWitt, D.P. (2001). Fundamentals of Heat and Mass Transfer, 5th edn, Wiley, New York.
25.
Pillai, K.M. and Advani, S.G. (1998). A Model for Unsaturated Flow in Woven Fiber Preforms During Mold Filling in Resin Transfer Molding , Journal of Composite Materials, 32(19): 1753—1783.
26.
Babu, B.Z. and Pillai, K.M. (2004). Experimental Investigation of the Effect of Fiber-mat Architecture on the Unsaturated Flow in Liquid Composite Molding, Journal of Composite Materials, 38: 57—59.
27.
Karniadakis, G., Beskok, A. and Aluru, N. (2001). Micro Flows, 1st edn, Springer , Dordrecht.
28.
Kang, M.K. and Lee, W.I. (1999). A Flow-front Refinement Technique for the Numerical Simulation of the Resin-transfer Molding Process, Composites Science and Technology, 59(11): 1663—1674.
29.
Reklaitis, G.V. , Ravindran, A. and Ragsdell, K.M. (1983). Engineering Optimization: Methods and Applications, Wiley , New York, xviii, 684.
30.
Koch, D.L. and Ladd, A.J.C. (1997). Moderate Reynolds Number Flows through Periodic and Random Arrays of Aligned Cylinders, Journal of Fluid Mechanics , 349: 31—66.
31.
Zhu, Y. and Granick, S. (2001). Rate-dependent Slip of Newtonian Liquid at Smooth Surfaces, Phys. Rev. Lett., 87(9): 96—105.
32.
Neto, C., Craig, V.S.J. and Williams, D.R.M. (2003). Evidence of Shear-dependent Boundary Slip in Newtonian Liquids, Eur. Phys. J. E, 12: S71—S74.
33.
Tretheway, D.C. and Meinhart, C.D. (2002). Apparent Fluid Slip at Hydrophobic Microchannel Walls, Physics of Fluids , 14(3): L9—L12.
